INVENTORY CONTROL SYSTEM : Optimization of production system and reliability

The main idea of this research to solve the problem of inventory management for the paper industry SPM PVT limited. The aim of this research was to find a methodology by which the inventory of raw material could be kept at minimum level by means of buffer stock level.The main objective then lies in finding the minimum level of buffer stock according to daily consumption of raw material, finding the Economic Order Quantity (EOQ) reorders point and how much order will be placed in a year to control the shortage of raw material.In this project, we discuss continuous review model (Deterministic EOQ models) that includes the probabilistic demand directly in the formulation. According to the formula, we see the reorder point and the order up to model. The problem was tackled mathematically as well as simulation modeling was used where mathematically tractable solution was not possible.The simulation modeling was done by Awesim software for developing the simulation network. This simulation network has the ability to predict the buffer stock level based on variable consumption of raw material and lead-time. The data collection for this simulation network is taken from the industrial engineering personnel and the departmental studies of the concerned factory. At the end, we find the optimum level of order quantity, reorder point and order days.

PV-Wind Hybrid Systems for Swedish Locations

PV-Wind-Hybrid systems for stand-alone applications have the potential to be more cost efficient compared to PV-alone systems. The two energy sources can, to some extent, compensate each others minima. The combination of solar and wind should be especially favorable for locations at high latitudes such as Sweden with a very uneven distribution of solar radiation during the year. In this article PV-Wind-Hybrid systems have been studied for 11 locations in Sweden. These systems supply the household electricity for single family houses. The aim was to evaluate the system costs, the cost of energy generated by the PV-Wind-Hybrid systems, the effect of the load size and to what extent the combination of these two energy sources can reduce the costs compared to a PV-alone system. The study has been performed with the simulation tool HOMER developed by the National Renewable Energy Laboratory (NREL) for techno-economical feasibility studies of hybrid systems. The results from HOMER show that the net present costs (NPC) for a hybrid system designed for an annual load of 6000 kWh with a capacity shortage of 10% will vary between $48,000 and $87,000. Sizing the system for a load of 1800 kWh/year will give a NPC of $17,000 for the best and $33,000 for the worst location. PV-Wind-Hybrid systems are for all locations more cost effective compared to PV-alone systems. Using a Hybrid system is reducing the NPC for Borlänge by 36% and for Lund by 64%. The cost per kWh electricity varies between $1.4 for the worst location and $0.9 for the best location if a PV-Wind-Hybrid system is used.

Attractive Work Process

Many companies both in Sweden and other parts of the world are since the beginning of the 21st century faceing a lack of work force (1,2,3). The ability to recruit and retain skilled employees is seen as one of the most important questions for the survival and development of the companies (4,5). Labour shortage is seen as the biggest obstacle for expansion for small enterprises in Sweden (5). There is a need for workplaces to be attractive, but how can the attractiveness be increased? Researchers at Högskolan Dalarna have during almost a decennium conducted research concerning attractive work. Based on a modell of qualities that contributes to make a work attractive (6) has a method aiming for raised attractiveness been developed for SME:s. All employees participate by answering a questionnaire about the importance of different qualities and to what degree they are fulfilled. Further discussions at the workplace on what to preserve and what to develop make the base for an action plan.Important experiences:• Discuss and establish the aim of the method with management and employees. • The company must be prepared to follow up and realize the action plan.• Agree about expectations – they must be realistic and practicable.• Reserve time to start the process and to end up in an action plan. • Avoid negative thinking and put problems away. • Take all the time small steps in the right direction.• Keep employees engaged and avoid the manager or process leader to take the command.• Use the strategy with small work groups; it gives better possibilities for participation and outspokenness.• Follow up studies are necessary to keep up the motivation.The most positive aspects of the method is its promoting perspective and that it engages all the employees.1.Rauhut, D. (2002). Arbetskraftsbrist och arbetskraftsinvandring: hot eller möjlighet för ekonomisk tillväxt? Östersund, ITPS, Institutet för tillväxtpolitiska studier.2.Funch, M. and C. Ehrnooth. (2008, 08-10-2008). Labour shortage despite financial crisis? Retrieved 2008-12-16, 2008, from www.norden.org/webb/news/news.asp?id=8113&lang=6. 3.Manpower (2008). Talent Shortage Survey 2008 Global Results: 10. 4.Bakker, A. B. and W. B. Schaufeli (2008). Positive organizational behavior: Engaged employees in flourishing organizations. Journal of Organizational Behavior 29: 147-154.5.Kennemar, J. and L. Jagrén (2008). Småföretagsbarometern. Stockholm, Swedbank Företagarna: 23.6.Åteg, M., A. Hedlund, et al. (2004). Attraktivt arbete. Från anställdas uttalanden till skapandet av en modell. Stockholm, Arbetslivsinstitutet.

Health care providers' perceptions of and attitudes towards induced abortions in sub-Saharan Africa and Southeast Asia : a systematic literature review of qualitative and quantitative data.

BACKGROUND: Unsafe abortions are a serious public health problem and a major human rights issue. In low-income countries, where restrictive abortion laws are common, safe abortion care is not always available to women in need. Health care providers have an important role in the provision of abortion services. However, the shortage of health care providers in low-income countries is critical and exacerbated by the unwillingness of some health care providers to provide abortion services. The aim of this study was to identify, summarise and synthesise available research addressing health care providers' perceptions of and attitudes towards induced abortions in sub-Saharan Africa and Southeast Asia. METHODS: A systematic literature search of three databases was conducted in November 2014, as well as a manual search of reference lists. The selection criteria included quantitative and qualitative research studies written in English, regardless of the year of publication, exploring health care providers' perceptions of and attitudes towards induced abortions in sub-Saharan Africa and Southeast Asia. The quality of all articles that met the inclusion criteria was assessed. The studies were critically appraised, and thematic analysis was used to synthesise the data. RESULTS: Thirty-six studies, published during 1977 and 2014, including data from 15 different countries, met the inclusion criteria. Nine key themes were identified as influencing the health care providers' attitudes towards induced abortions: 1) human rights, 2) gender, 3) religion, 4) access, 5) unpreparedness, 6) quality of life, 7) ambivalence 8) quality of care and 9) stigma and victimisation. CONCLUSIONS: Health care providers in sub-Saharan Africa and Southeast Asia have moral-, social- and gender-based reservations about induced abortion. These reservations influence attitudes towards induced abortions and subsequently affect the relationship between the health care provider and the pregnant woman who wishes to have an abortion. A values clarification exercise among abortion care providers is needed.

Kravsammanställning samt utvärdering avbildvisningsprogramför diagnostik inom telepatologi : En fallstudiemed SIV-metoden som tillvägagångssätt

De flesta har i sin närhet någon som drabbats av cancer och sjukdomsfallen har ökat genom åren. Den yrkesgrupp som ställer diagnos av denna sjukdom är patologer. Bristen på patologer är idagsläget stor och det finns därför ett behov av att finna effektiva lösningar för att möta denna brist och en ökande mängd patienter. För att digitalisera vävnadsproven som diagnostiseras, scannas dessa in med en glasscanner. Dessa digitala bildfiler kan sedan visas i ett bildvisningsprogram och delas digitalt mellan patologer på distans. Detta begrepp kallas för telepatologi. Studien utgår utifrån följande frågeställningar: Vilka krav är väsentliga och bör ingå i en utvärdering för bildvisningsprogram avsedda för diagnostik inom telepatologi? Vilket bildvisningsprogram är mest lämpat att implementeras i ett webbaserat system baserat på dessa väsentliga krav? Syftet med studien är att undersöka vilka krav som är väsentliga och bör ingå i en utvärdering av bildvisningsprogram avsedda för diagnostik inom telepatologi, samt att utföra en utvärdering av ett urval bildvisningsprogramvaror med hjälp av dessa krav. En fallstudie genomfördes med datainsamlingsmetoderna: intervjuer med två personer från studiens samarbetspartner CGM, Frågeformulär där Sveriges patologer var respondenter samt dokumentstudier för att samla in information gällande bildvisningsprogrammen. Studien tillämpar utvalda delar ur Anders G. Nilssons SIV-metod som tillvägagångsätt för att samla in krav samt för att göra ett urval av bildvisningsprogram som sedan utvärderas gentemot dessa krav. Resultaten av datainsamlingarna analyserades och ledde till ett kravdokument med väsentliga krav.Tre så kallade utslagsgivande faktorer bland dessa krav var att bildvisningsprogrammet måste vara webbaserat utan installation på klient, funktioner för in- och ut-zoomning samt panorering måste finnas. Utvärderingen av utvalda bildvisningsprogram visade slutligen att OpenSlide var mest lämpad att implementeras i ett webbaserat system.