A Cost Model for the Effect of Setup Time Reduction in Stainless Steel Strip Production

Setup time reduction facilitate the flexibility needed for just-in-time production. An integrated steel mill with meltshop, continuous caster and hot rolling mill is often operated as decoupled processes. Setup time reduction provides the flexibility needed to reduce buffering, shorten lead times and create an integrated process flow. The interdependency of setup times, process flexibility and integration were analysed through system dynamics simulation. The results showed significant reductions of energy consumption and tied capital. It was concluded that setup time reduction in the hot strip mill can aid process integration and hence improve production economy while reducing environmental impact.

e-infrastruktur som stöd för hemtjänsten

The annual cost of home care services of transport in Falun/Borlänge, is now at 31 million kronor. It is clear from previous research that it is possible to reduce these costs through a restructuring of the existing home-help service. The restructuring aims to have a higher proportion of older people, who are in need of care, to live in special accommodation, in order to reduce transport costs. Therefore there is a need for systems that allow home-help service to plan their operations in such a way that transport is working as efficiently as possible. Through better planning, there are profits to be done. The rewards are not only of an economic nature but also include a reduced environmental impact, better working environment, improving road safety, and better service. One way to achieve this is to give home-help service personnel better navigation aid when they move between the customers. The thesis describes such a solution through a developed prototype based on a standardized interaction between a planning and a navigation service. The thesis describes such a solution through a developed prototype based on a standardized interaction between a planning and a navigation service. Development work has also been a first step in developing a standardized information infrastructure for home-help service. The purpose of the thesis is, on the basis of theory and the experience we have acquired through the development of the prototype, to discuss general issues which are of interest when developing standardized information infrastructure.

Tribology in Metal Working

This thesis focuses on the tribological performance of tool surfaces in two steel working operations, namely wire drawing and hot rolling. In all forming operations dimensions and surface finish of the products are of utmost importance. Forming basically includes three parts – forming conditions excluded – that may be changed; work material, tool and (possibly) lubricant. In the interface between work material and tool, the conditions are very aggressive with – generally or locally – high temperatures and pressures. The surfaces will be worn in various ways and this will change the conditions in the process. Consequently, the surface finish as well as the dimensions of the formed product may change and in the end, the product will not fulfil the requirements of the customer. Therefore, research and development in regard to wear, and consequently tribology, of the forming tools is of great interest. The investigations of wire drawing dies focus on coating adhesion/cohesion, surface characteristics and material transfer onto the coated steel both in laboratory scale as well as in the wire drawing process. Results show that it in wire drawing is possible to enhance the tribological performance of drawing dies by using a lubricant together with a steel substrate coated by a polished, dual-layer coating containing both hard and friction-lowering layers. The investigations of hot rolling work rolls focus on microstructure and hardness as well as cracking- and surface characteristics in both laboratory scale and in the hot strip mill. Results show that an ideal hot work roll material should be made up of a matrix with high hardness and a large amount of complex, hard carbides evenly distributed in the microstructure. The surface failure mechanisms of work rolls are very complex involving plastic deformation, abrasive wear, adhesive wear, mechanical and thermal induced cracking, material transfer and oxidation. This knowledge may be used to develop new tools with higher wear resistance giving better performance, lower costs and lower environmental impact.

Reglerad miljöredovisning : Tillståndspliktiga företag i Dalarna 2013

Bakgrund: De verksamheter som bedriver miljöfarlig verksamhet enligt miljöbalkenär anmälnings- eller tillståndspliktiga. Dessa företag ska lämnamiljöinformation i förvaltningsberättelsen. Tidigare studier visar attföretagen inte följer denna regel fullt ut. Som förklaring till företagensval av att miljöredovisa eller att inte redovisa sin miljöpåverkan användervi oss av legitimitetsteorin och intressentteorin.Syfte: Syftet med undersökningen är att för år 2013 se hur väl detillståndspliktiga företagen i Dalarna följer lagen om miljöredovisningoch vilka faktorer som kan förklara deras tillämpning av lagen.Metod: Studien bygger huvudsakligen på kvantitativ metod med inslag avkvalitativ metod. Vi använder en deduktiv ansats för att skapa fyrahypoteser om omsättning, branschtillhörighet, revisionsbyrå ochskuldsättningsgrad. Urvalet är de tillståndspliktiga företagen i Dalarna.Varje företag kan ha flera enheter som är tillståndspliktiga och vårt urval,Dalarna, blir 209 enheter varav 116 är stora enheter.Slutsats: Företagen i Dalarna uppfyller inte lagen om reglerad miljöredovisning tillfullo. Endast 18 av 116 stora enheter uppfyller alla fyra punkterna.Däremot är det 61,2 procent av de stora enheterna som får tre poäng.Som en jämförelse med Ljungdahls studie där nästan 27 procent når trepoäng ser vi en klar förbättring. De faktorer som kan förklara företagenstillämpning av lagen i vår undersökning är omsättning, de som anlitarrevisionsbyrån PwC samt branschtillhörighet avlopp och avfall. Av defyra hypoteser som vi använder är det en som stämmer, två som förkastasoch en som vi inte med säkerhet kan avgöra om den ska vara kvar ellerförkastas.

Energy efficient and economic renovation of residential buildings with low-temperature heating and air heat recovery

With the building sector accounting for around 40% of the total energy consumption in the EU, energy efficiency in buildings is and continues to be an important issue. Great progress has been made in reducing the energy consumption in new buildings, but the large stock of existing buildings with poor energy performance is probably an even more crucial area of focus. This thesis deals with energy efficiency measures that can be suitable for renovation of existing houses, particularly low-temperature heating systems and ventilation systems with heat recovery. The energy performance, environmental impact and costs are evaluated for a range of system combinations, for small and large houses with various heating demands and for different climates in Europe. The results were derived through simulation with energy calculation tools. Low-temperature heating and air heat recovery were both found to be promising with regard to increasing energy efficiency in European houses. These solutions proved particularly effective in Northern Europe as low-temperature heating and air heat recovery have a greater impact in cold climates and on houses with high heating demands. The performance of heat pumps, both with outdoor air and exhaust air, was seen to improve with low-temperature heating. The choice between an exhaust air heat pump and a ventilation system with heat recovery is likely to depend on case specific conditions, but both choices are more cost-effective and have a lower environmental impact than systems without heat recovery. The advantage of the heat pump is that it can be used all year round, given that it produces DHW. Economic and environmental aspects of energy efficiency measures do not always harmonize. On the one hand, lower costs can sometimes mean larger environmental impact; on the other hand there can be divergence between different environmental aspects. This makes it difficult to define financial subsidies to promote energy efficiency measures.

Sustainability in nursing : a concept analysis

Aim. The aim of this study was to describe, explore and explain the concept of sustainability in nursing. Background. Although researchers in nursing and medicine have emphasised the issue of sustainability and health, the concept of sustainability in nursing is undefined and poorly researched. A need exists for theoretical and empirical studies of sustainability in nursing. Design. Concept analysis as developed by Walker and Avant. Method. Data were derived from dictionaries, international healthcare organisations and literature searches in the CINAHL and MEDLINE databases. Inclusive years for the search ranged from 1990 to 2012. A total of fourteen articles were found that referred to sustainability in nursing. Results. Sustainability in nursing involves six defining attributes: ecology, environment, future, globalism, holism and maintenance. Antecedents of sustainability require climate change, environmental impact and awareness, confidence in the future, responsibility and a willingness to change. Consequences of sustainability in nursing include education in the areas of ecology, environment and sustainable development as well as sustainability as a part of nursing academic programs and in the description of the academic subject of nursing. Sustainability should also be part of national and international healthcare organisations. The concept was clarified herein by giving it a definition. Conclusion. Sustainability in nursing was explored and found to contribute to sustainable development, with the ultimate goal of maintaining an environment that does not harm current and future generations' opportunities for good health. This concept analysis provides recommendations for the healthcare sector to incorporate sustainability and provides recommendations for future research.