Improved Road Design for Future Maintenance - Analysis of Road Barrier Repair Costs

The cost of a road construction over its service life is a function of the design, quality of construction, maintenance strategies and maintenance operations. Unfortunately, designers often neglect a very important aspect which is the possibility to perform future maintenance activities. The focus is mainly on other aspects such as investment costs, traffic safety, aesthetic appearance, regional development and environmental effects. This licentiate thesis is a part of a Ph.D. project entitled “Road Design for lower maintenance costs” that aims to examine how the life-cycle costs can be optimized by selection of appropriate geometrical designs for the roads and their components. The result is expected to give a basis for a new method used in the road planning and design process using life-cycle cost analysis with particular emphasis on road maintenance. The project started with a review of literature with the intention to study conditions causing increased needs for road maintenance, the efforts made by the road authorities to satisfy those needs and the improvement potential by consideration of maintenance aspects during planning and design. An investigation was carried out to identify the problems which obstruct due consideration of maintenance aspects during the road planning and design process. This investigation focused mainly on the road planning and design process at the Swedish Road Administration. However, the road planning and design process in Denmark, Finland and Norway were also roughly evaluated to gain a broader knowledge about the research subject. The investigation was carried out in two phases: data collection and data analysis. Data was collected by semi-structured interviews with expert actors involved in planning, design and maintenance and by a review of design-related documents. Data analyses were carried out using a method called “Change Analysis”. This investigation revealed a complex combination of problems which result in inadequate consideration of maintenance aspects. Several urgent needs for changes to eliminate these problems were identified. Another study was carried out to develop a model for calculation of the repair costs for damages of different road barrier types and to analyse how factors such as road type, speed limits, barrier types, barrier placement, type of road section, alignment and seasonal effects affect the barrier damages and the associated repair costs. This study was carried out using a method called the “Case Study Research Method”. Data was collected from 1087 barrier repairs in two regional offices of the Swedish Road Administration, the Central Region and the Western Region. A table was established for both regions containing the repair cost per vehicle kilometre for different combinations of barrier types, road types and speed limits. This table can be used by the designers in the calculation of the life-cycle costs for different road barrier types.

Load Adapted Solar Thermal Combisystems - Optical Analysis and Systems Optimization

In a northern European climate a typical solar combisystem for a single family house normally saves between 10 and 30 % of the auxiliary energy needed for space heating and domestic water heating. It is considered uneconomical to dimension systems for higher energy savings. Overheating problems may also occur. One way of avoiding these problems is to use a collector that is designed so that it has a low optical efficiency in summer, when the solar elevation is high and the load is small, and a high optical efficiency in early spring and late fall when the solar elevation is low and the load is large.The study investigates the possibilities to design the system and, in particular, the collector optics, in order to match the system performance with the yearly variations of the heating load and the solar irradiation. It seems possible to design practically viable load adapted collectors, and to use them for whole roofs ( 40 m2) without causing more overheating stress on the system than with a standard 10 m2 system. The load adapted collectors collect roughly as much energy per unit area as flat plate collectors, but they may be produced at a lower cost due to lower material costs. There is an additional potential for a cost reduction since it is possible to design the load adapted collector for low stagnation temperatures making it possible to use less expensive materials. One and the same collector design is suitable for a wide range of system sizes and roof inclinations. The report contains descriptions of optimized collector designs, properties of realistic collectors, and results of calculations of system output, stagnation performance and cost performance. Appropriate computer tools for optical analysis, optimization of collectors in systems and a very fast simulation model have been developed.

Sustainability in nursing : a concept analysis

Aim. The aim of this study was to describe, explore and explain the concept of sustainability in nursing. Background. Although researchers in nursing and medicine have emphasised the issue of sustainability and health, the concept of sustainability in nursing is undefined and poorly researched. A need exists for theoretical and empirical studies of sustainability in nursing. Design. Concept analysis as developed by Walker and Avant. Method. Data were derived from dictionaries, international healthcare organisations and literature searches in the CINAHL and MEDLINE databases. Inclusive years for the search ranged from 1990 to 2012. A total of fourteen articles were found that referred to sustainability in nursing. Results. Sustainability in nursing involves six defining attributes: ecology, environment, future, globalism, holism and maintenance. Antecedents of sustainability require climate change, environmental impact and awareness, confidence in the future, responsibility and a willingness to change. Consequences of sustainability in nursing include education in the areas of ecology, environment and sustainable development as well as sustainability as a part of nursing academic programs and in the description of the academic subject of nursing. Sustainability should also be part of national and international healthcare organisations. The concept was clarified herein by giving it a definition. Conclusion. Sustainability in nursing was explored and found to contribute to sustainable development, with the ultimate goal of maintaining an environment that does not harm current and future generations' opportunities for good health. This concept analysis provides recommendations for the healthcare sector to incorporate sustainability and provides recommendations for future research.

The discourses on induced abortion in Ugandan daily newspapers : a discourse analysis

Background: Ugandan law prohibits abortion under all circumstances except where there is a risk for the woman's life. However, it has been estimated that over 250 000 illegal abortions are being performed in the country yearly. Many of these abortions are carried out under unsafe conditions, being one of the most common reasons behind the nearly 5000 maternal deaths per year in Uganda. Little research has been conducted in relation to societal views on abortion within the Ugandan society. This study aims to analyze the discourse on abortion as expressed in the two main daily Ugandan newspapers. Method: The conceptual content of 59 articles on abortion between years 2006-2012, from the two main daily English-speaking newspapers in Uganda, was studied using principles from critical discourse analysis. Results: A religious discourse and a human rights discourse, together with medical and legal sub discourses frame the subject of abortion in Uganda, with consequences for who is portrayed as a victim and who is to blame for abortions taking place. It shows the strong presence of the Catholic Church within the medial debate on abortion. The results also demonstrate the absence of medial statements related to abortion made by political stakeholders. Conclusions: The Catholic Church has a strong position within the Ugandan society and their stance on abortion tends to have great influence on the way other actors and their activities are presented within the media, as well as how stakeholders choose to convey their message, or choose not to publicly debate the issue in question at all. To decrease the number of maternal deaths, we highlight the need for a more inclusive and varied debate that problematizes the current situation, especially from a gender perspective.