Combined solar and pellet heating systems for single-family houses : How to achieve decreased electricity usage, increased system efficiency and increased solar gains

In Sweden, there are about 0.5 million single-family houses that are heated by electricity alone, and rising electricity costs force the conversion to other heating sources such as heat pumps and wood pellet heating systems. Pellet heating systems for single-family houses are currently a strongly growing market. Future lack of wood fuels is possible even in Sweden, and combining wood pellet heating with solar heating will help to save the bio-fuel resources. The objectives of this thesis are to investigate how the electrically heated single-family houses can be converted to pellet and solar heating systems, and how the annual efficiency and solar gains can be increased in such systems. The possible reduction of CO-emissions by combining pellet heating with solar heating has also been investigated. Systems with pellet stoves (both with and without a water jacket), pellet boilers and solar heating have been simulated. Different system concepts have been compared in order to investigate the most promising solutions. Modifications in system design and control strategies have been carried out in order to increase the system efficiency and the solar gains. Possibilities for increasing the solar gains have been limited to investigation of DHW-units for hot water production and the use of hot water for heating of dishwashers and washing machines via a heat exchanger instead of electricity (heat-fed appliances). Computer models of pellet stoves, boilers, DHW-units and heat-fed appliances have been developed and the parameters for the models have been identified from measurements on real components. The conformity between the models and the measurements has been checked. The systems with wood pellet stoves have been simulated in three different multi-zone buildings, simulated in detail with heat distribution through door openings between the zones. For the other simulations, either a single-zone house model or a load file has been used. Simulations were carried out for Stockholm, Sweden, but for the simulations with heat-fed machines also for Miami, USA. The foremost result of this thesis is the increased understanding of the dynamic operation of combined pellet and solar heating systems for single-family houses. The results show that electricity savings and annual system efficiency is strongly affected by the system design and the control strategy. Large reductions in pellet consumption are possible by combining pellet boilers with solar heating (a reduction larger than the solar gains if the system is properly designed). In addition, large reductions in carbon monoxide emissions are possible. To achieve these reductions it is required that the hot water production and the connection of the radiator circuit is moved to a well insulated, solar heated buffer store so that the boiler can be turned off during the periods when the solar collectors cover the heating demand. The amount of electricity replaced using systems with pellet stoves is very dependant on the house plan, the system design, if internal doors are open or closed and the comfort requirements. Proper system design and control strategies are crucial to obtain high electricity savings and high comfort with pellet stove systems. The investigated technologies for increasing the solar gains (DHW-units and heat-fed appliances) significantly increase the solar gains, but for the heat-fed appliances the market introduction is difficult due to the limited financial savings and the need for a new heat distribution system. The applications closest to market introduction could be for communal laundries and for use in sunny climates where the dominating part of the heat can be covered by solar heating. The DHW-unit is economical but competes with the internal finned-tube heat exchanger which is the totally dominating technology for hot water preparation in solar combisystems for single-family houses.

Annual CO-emissions of combined pellet and solar heating systems

Emissions are an important aspect of a pellet heating system. High carbon monoxide emissions are often caused by unnecessary cycling of the burner when the burner is operated below the lowest combustion power. Combining pellet heating systems with a solar heating system can significantly reduce cycling of the pellet heater and avoid the inefficient summer operation of the pellet heater. The aim of this paper was to study CO-emissions of the different types of systems and to compare the yearly CO-emissions obtained from simulations with the yearly CO-emissions calculated based on the values that are obtained by the standard test methods. The results showed that the yearly CO-emissions obtained from the simulations are significant higher than the yearly CO-emissions calculated based on the standard test methods. It is also shown that for the studied systems the average emissions under these realistic annual conditions were greater than the limit values of two Eco-labels. Furthermore it could be seen that is possible to almost halve the CO-emission if the pellet heater is combined with a solar heating system.

Degree projects improving co-operation between the teacher education program and schools : - Swedish experiences

In 1977, when teacher education inSwedenwas incorporated into the university system, the main reason was to transform it into an academic tradition. Now, nearly 30 years later, there is still tension between the academic and the vocational tradition; they show up as different and separated elements in a program that is meant to prepare students for a career as a teacher and for a possible future career as a researcher in this field. This tension gives rise to a risk of allowing parallel “tracks” to develop and of isolating the degree thesis work from other courses. On the teacher-training program in which we are involved, close co-operation with partner-schools, where the practical part of the program takes place, has been established. Here, the students´ degree theses are an important factor in making this co-operation work on a concrete level. Accordingly, the purpose of the degree thesis is both to reflect problems in schools and contribute to better teaching in the individual school, but also to offer relevant educational subject matter to the students, which may be adapted as an element in the university’s research environments. From these points of view, the degree thesis is an important part of teacher education and rather more than just a single course. The degree thesis should be an element that gives the students an opportunity to show that they have reached central goals in the teacher education program. It should also be an integral part in the development of critical and scholarly thinking, deepening pedagogical and didactic knowledge and giving the students an opportunity to apply research methods. We will here use two minor case studies: one that compares teacher education programs in five Swedish universities and one minor study at one of those universities, in order to elaborate on the questions: - What purpose has a degree thesis and what role does it play in teacher education? - What criteria are relevant to assessing a degree thesis and what qualities do the degree theses have? - Is it possible to assess a degree thesis fairly and what happens to students who do not pass? - How could the degree thesis be used to improve the contact between the teacher education program and its partner schools in order to contribute to the development of the individual school?