Alternative Identities and Foreign Language Learning

My D-essay has the working title “Alternative Identities and Foreign Language Learning”. I have chosen this area because I have noticed a certain reluctance among Swedish students to use the foreign language English in English classes. They often seem embarrassed to express themselves in a language which is not their mother tongue, but they seem less embarrassed when they are allowed to act somebody else. These two observations converge into a focus of discussion on the matter, which will be supported by a minor study of my own, by extracts from other people’s essays on the matter, and by an overview of current litterature on language, identity and drama.The aim of my essay is to compare Swedish students’ willingness to use the foreign language English when acting minor plays in school, as themselves and as a chosen character, and to investigate the possibility of improving students’ willingness to use a foreign language, when given the opportunity to do so through acting somebody else.

Utvärdering av ICC-profiler och profil-inställningar för HP Indigo Press 1000

Det nystartade digitaltryckeriet Digaloo planerar att inom en snar framtid införa ICC-hantering i sittarbetsflöde. Med anledning av detta har en studie utförts där antalet erfordrade ICC-profiler undersöktssamt vilka akromatiska inställningar som bäst lämpar sig för tryckeriets HP Indigo Press 1000.Testtryckning utfördes på sex av Digaloos mest använda papperskvaliteter. Genom inläsning av testkartorhar de olika papperskvaliteternas reproducerbara färgrymder åskådliggjorts. Grundat på resultatetfrån denna testtryckning framställdes ICC-profiler för valda papperskvaliteter. Dessa genereradesmed olika inställningar för akromatisk repro och TIC (Total Ink Coverage). Vid en andra testtryckninganvändes dessa ICC-profiler för konvertering av mellanton-, natt- och snöbilder, vilka trycktespå olika papperskvaliteter.Resultatet från den första testtryckningen visar att HP Indigo Press 1000 återger störst förgrymd påpapperskvaliteten Silverblade Silk, tätt följd av Silverblade Art. De minsta färgrymderna reproduceraspå Lessebo Linné Gultonat och Lessebo Linné Naturvit.Vid perceptuell bedömning av de olika bilderna blev resultatet att bäst tryckresultat uppnås medpappersspecifika ICC-profiler. Detta gäller dock endast i två av tre fall. Vid bedömning av bäst lämpadTIC ansågs den idag på Digaloo använda nivån som mycket dålig. Genom att antingen sänka eller höjadenna nivå bedömdes tryckresultatet öka i kvalitet.Slutligen visar studien även att akromatik i form av UCR ger bäst bildåtergivning i mellanton- ochnattbilder på de valda papperskvaliteterna. De olika graderna av GCR i snöbilder anses dock passaolika bra beroende på vilken papperskvalitet som används.

Utvärdering av kvalité och dess behov inom förprovtryck

It always has been a need for the abiltiy to create color proofs. When an error occurs late in the production process, itis allways complicated and difficult to correct the error. In this project, digital proofs been made and discussions havebeen held with several people in the printing industry, in order to examine how well excisting digital proofs, meet thedemand of the market. And how close the digital proofs can come to the actual printsheat from the press. The study hasbeen shown that the one thing that has had the most influence on the outcome for the quality of a digital proof, is theprintshop operator’s knowledge about color management and proofing systems. Many advertising agencies in the graphicindustry think rasterised proofs are not necessesary and expensive. Therefor they prefer a cheaper alternative, whichdoesn’t show colors as well as the rasterised proof, but well enough to be content with it. There are a good awarenessconcerning lack of communication between printshop, reproduction and advertising agency. Advertising agencies thinkthat printshop rarely listen to what they have to say, while the printshop think that the advertising agency doesn’t understandwhat they are trying to tell them. The outcome of the printed proofs in this study can’t be representive for howgood digital proofs are conducted in regular basis in the industry. The divergence between the print press sheat and thedigital proof that was made was bigger than expected. This shows that implementation of ICC profiles in a color managementflow, not alone is the answer to making perfect digital proofs. There are so many other issues that has to be examined,like color management software, measure tools and correct color management module. In order to make a perfectproof, you have to look at the whole picture. In the end, the human eye finally has the last word on wheather theproof is good or not.

Print quality study of a laboratory offset press

PAPRO operates within the Forest Research company and their mission is to develop value-addingindustry solutions. At present there are no good ways for mills to easily test the printing quality on newsprintpaper. There is a great need for a fast way to do this on different paper qualities; with a laboratory-offset press this can be both a time and money saving method. At PAPRO Forest Research, NewZealand, a laboratory offset press has been developed and designed, during the past seven years, concerningthis issue. Earlier projects were made concerning the press, e.g. to establish the optimal settings.The mission with this project was to partly determine the present variability of the print quality andto evaluate if the fountain solution, distilled water and 2% Diol green concentrate, used at the momentmixed with different percentages of Isopropanol could decrease the variability and contribute to morestabile results. Throughout the whole project the print quality showed a high variation and was evenmore variable when the Isopropanol was added. All in all 50 print rounds times twelve printed paperstrips was carried out through the project divided into three parts. To analyse the print quality, amicroscope with an image capture camera has been used. Data from the taken images was analysedand inserted into charts to see the variations.The conclusions of the whole project are not satisfying because no final evaluations were possible tomake. Main conclusions are that the additive of Isopropanol to the ordinary fountain solution, used atpresent, only contributed to more unstable results of the print quality. And it seems to be difficult toget some stable results from the lab press as long as the room where it is placed is not fully conditionedas required for the process of offset printing. And the fact that the airbrush which applies theamount of fountain solution is also variable, as shown in earlier projects, which contributes to unstableresults as well. For further work more exact parameters as a conditioned room are required and thepossibility to further design the laboratory press to use waterless offset printing instead.

Print quality study of newsprint : Further development of the laboratoryoffset press at PAPRO

A laboratory offset press has been developed over the last five years at PAPRO for testing print qualityon newsprint, as at present, there is no good way for the mills to test this issue. In this project a comparisonhas been made between a laboratory offset press and a commercial press to see if the laboratoryoffset press can be used as a reliable test method or if a further development is needed.To evaluate the method, similar papers have been printed in both presses and compared using imageanalysis techniques. All together eighteen samples were tested which is enough to give comparableresults. The print quality showed a high variation, the values from the laboratory offset press and thecommercial press were not following the same trends. At present time the laboratory offset press needsome further development before it can be used as a reliable test method for halftone prints. Even sosome conclusions were made.The newsprint that has been used came from Norske Skog Tasman Mill (Kawerau), since the otheraim of this project was to do a repeatability study of their three existing paper machines to distinguishpossible differences in the production. The paper samples were taken from each paper machine on sixdifferent dates to give a representative result. This also gave the opportunity to compare the machinesbetween themselves. Comparison between the machines shows that the wire side gives a better andmore even result than the topside on the prints from the laboratory offset press. According to the resultfrom the commercial press the wire side shows a higher degree of variability. Samples from papermachine 2 and 3 were less variable and had the lowest standard deviation of grey level for solid areas.This suggests that newsprints from PM 2 and PM 3 give a more even print quality with a better inkcoverage.

Kraftutveckling för manuella trädfällningsredskap : Force development for manual tree felling tools

The objective with this study has been to build general models of the mechanics in tree felling with chain-saw and to compare felling torque for different tools. The theoretical models are completed and validated with a comparative study. The study includes a great number of felling tools of which some are used with different methods. Felling torque was measured using a naturally like measuring arrangement where a tree is cut at about 3.7 m height and then anchored with a dynamometer to a tree opposite to the felling direction. Notch and felling cut was made as ordinary with exception that the hinge was made extra thin to reduce bending resistance. The tree was consequently not felled during the trials and several combinations of felling tools and individuals could be used on the same tree.The results show big differences between tools, methods and persons. The differences were, however, not general, but could vary depending on conditions (first of all tree diameters). Tools and methods that push or pull on the stem are little affected by the size of the tree, while tools that press on the stump are very much dependent of a large stump-diameter. Hand force asserted on a simple pole is consequently a powerful tool on small trees. For trees of medium size there are several alternative methods with different sizes and brands of felling levers and wedges. Larger and more ungainly tools and methods like tree pusher, winch, etc. develop very high felling torque on all tree sizes. On large trees also the felling wedge and especially the use of several wedges together develop very high felling torque.

Hårdare tag i arbetslivet? : Åtgärder mot arbetsrelaterat våld i facklig press 1978–2004

Preventing violence at work: A study of descriptions of safety measures in Swedish trade union journals 1978–2004 The purpose of this study is to examine if perceptions of interventions aimed at violence in the workplace have changed since the 1970s. In the beginning of the study period, structural factors are seen as the dominating explanation for workplace violence. The crime perspective rises in the 1990’s and methods of intervention becomes the control- and justice functions of larger society. The result shows search for accountability to be a salient factor for understanding the development towards an increasing use of penal sanctions.

Push or pull? : The relationship between quality of care and use of complementary and alternative medicine among patients with lung cancer in Sweden

Little is known about relationships between quality of care (QoC) and use of complementary and alternative medicine (CAM) among patients with lung cancer (LC). Purpose: This study examines CAM-use among patients with LC in Sweden, associations between QoC and CAM-use among these patients, and reported aspects of LC-care perceived as particularly positive and negative by patients, as well as suggestions for improving QoC. Methods: Survey data from 94 patient members of the Swedish LC patient organization about CAM-use and QoC as measured by the instrument “Quality from the patient’s perspective” were analyzed. Results: Fifty (53%) LC-patients used CAM, with 40 of the CAM-users reporting that CAM helped them. The most common CAMs used were dietary supplements and natural remedies, followed by prayer. Significantly more patients reported using prayer and meditation for cure than was the case for other types of CAM used. Less than half the CAM-users reported having spoken with staff from the biomedical health care system about their CAM-use. Patients provided numerous suggestions for improving LC-care in a variety of areas, aiming at a more effective and cohesive care trajectory. No differences in QoC were found between CAM-users and non-CAM-users, but differences in CAM-use i.e. type of CAM, reasons for using CAM, and CAM-provider consulted could be associated with different experiences of care. Conclusions: It is important to recognize that CAM-users are not a homogeneous group but might seek different types of CAMs and CAM-providers in different situations depending on experiences of care.

Våld på jobbet : Beskrivningar av våld i arbetslivet 1978–2004 i facklig press

Violence at work as a social problem: a study of the media coverage on workplace violence in Swedish trade union journals 1978–2004 The main purpose of this study was to find out the extent of the unions media coverage on workplace violence and the ways in which the topic was framed. The study shows that the reporting of violence in the workplace described in journals is on a stable level during the period 1978–98. However from the year 2000 and onwards, there is a clear increase in the attention. Four categories of workplace violence were used to identify and recognize different types of violence: intrusive-, consumer-, relationship-and organizational violence. This shows that much of the attention over time has shifted from intrusive violence to organizational violence and consumer violence. What seems to have happened is that workplace violence has become more than just robberies and assaults in the retail business. The stereotypical image of the criminal is challenged by non-traditional criminals like nurses, elderly people and companies. Certain groups, e.g. care workers, come to account for an increasing proportion of attention, both as perpetrators and victims of violence. This study is an important step in understanding the increased reports of workplace violence in Sweden.