Concreteness in Business letters : a Corpus-based Analysis of British and Pakistani English

Linguistic features of business letters have been a research target of both linguists and business writers. In this study, the language of British and Pakistani Business letters was compared and contrasted in terms of concreteness and abstractness. A corpus of 100 business letters from Inner Circle and Outer Circle writers were collected for analysis. The findings of the study revealed that British writers use more specific and concrete nouns, definite determiners, numeral, possessive and demonstrative adjectives, cohesive and rhetorical devices than the Pakistani Writers in order to be become concrete and vivid in their communication. The present findings are rather corpus specific since the data include only two countries; however this study may lead to further cross circle research including Expanding Circle research of business letters in terms of concreteness and abstractness. The issue of concreteness in Cross-circle business English can also be studied from psychological, sociological and anthropological perspectives in future Research.

What is important for you? A qualitative interview study of living with diabetes and experiences of diabetes care to establish a basis for a tailored Patient-Reported Outcome Measure for the Swedish National Diabetes Register

OBJECTIVES: There is a growing emphasis on the perspective of individuals living with diabetes and the need for a more person-centred diabetes care. At present, the Swedish National Diabetes Register (NDR) lacks patient-reported outcome measures (PROMs) based on the perspective of the patient. As a basis for a new PROM, the aim of this study was to describe important aspects in life for adult individuals with diabetes. DESIGN: Semistructured qualitative interviews analysed using content analysis. SETTING: Hospital-based outpatient clinics and primary healthcare clinics in Sweden. PARTICIPANTS: 29 adults with type 1 diabetes mellitus (DM) (n=15) and type 2 DM (n=14). INCLUSION CRITERIA: Swedish adults (≥18 years) living with type 1 DM or type 2 DM (duration ≥5 years) able to describe their situation in Swedish. Purposive sampling generated heterogeneous characteristics. RESULTS: To live a good life with diabetes is demanding for the individual, but experienced barriers can be eased by support from others in the personal sphere, and by professional support from diabetes care. Diabetes care was a crucial resource to nurture the individual's ability and knowledge to manage diabetes, and to facilitate life with diabetes by supplying support, guidance, medical treatment and technical devices tailored to individual needs. The analysis resulted in the overarching theme 'To live a good life with diabetes' constituting the two main categories 'How I feel and how things are going with my diabetes' and 'Support from diabetes care in managing diabetes' including five different categories. CONCLUSIONS: Common aspects were identified including the experience of living with diabetes and support from diabetes care. These will be used to establish a basis for a tailored PROM for the NDR.

Ny förpackning för Renat Brännvin åt Vin & Sprit AB

The purpose of this degree project is to come up with a new package to Renat Brännvin for »Vin & SpritAB« and make the product more attractive on the market of bars, restaurants and hotels. The commissionhas included to decide the material of the package, whether it´s possible to manufacture the productand to make an estimation of the costs.The conditions that »Vin & Sprit AB« set up was to make the product attractive to a younger targetgroup, in this case people from 20 to 40 years old. As Renat Brännvin is considered to be a product of firstclass it´s of great importance that the package reflects the look of a premium product.At first we looked at the history of the company »Vin & Sprit AB« and Renat Brännvin. We decidedthat the package schould consist of a bottle, glasses and a device used when serving the liquor. To getinspiration before sketching we studied different kinds of bottles, glasses and serving devices. We madea lot of different sketches to start with after which we consult with Ingrid Florén – our supervisor from»Vin & Sprit AB« – agreed on one. That one we developed and we made more accurate sketches in 3DStudioMAX.At last we looked at the opportunities to produce the bottle by questioning different manufacturers. Wewanted to know the limitations to consider when making a bottle.

Optimal Path Searching through Specified Routes using different Algorithms

To connect different electrical, network and data devices with the minimum cost and shortest path, is a complex job. In huge buildings, where the devices are placed at different locations on different floors and only some specific routes are available to pass the cables and buses, the shortest path search becomes more complex. The aim of this thesis project is, to develop an application which indentifies the best path to connect all objects or devices by following the specific routes.To address the above issue we adopted three algorithms Greedy Algorithm, Simulated Annealing and Exhaustive search and analyzed their results. The given problem is similar to Travelling Salesman Problem. Exhaustive search is a best algorithm to solve this problem as it checks each and every possibility and give the accurate result but it is an impractical solution because of huge time consumption. If no. of objects increased from 12 it takes hours to search the shortest path. Simulated annealing is emerged with some promising results with lower time cost. As of probabilistic nature, Simulated annealing could be non optimal but it gives a near optimal solution in a reasonable duration. Greedy algorithm is not a good choice for this problem. So, simulated annealing is proved best algorithm for this problem. The project has been implemented in C-language which takes input and store output in an Excel Workbook

System Integration of PV/T Collectors in Solar Cooling Systems

The demand for cooling and air-conditioning of building is increasingly ever growing. This increase is mostly due to population and economic growth in developing countries, and also desire for a higher quality of thermal comfort. Increase in the use of conventional cooling systems results in larger carbon footprint and more greenhouse gases considering their higher electricity consumption, and it occasionally creates peaks in electricity demand from power supply grid. Solar energy as a renewable energy source is an alternative to drive the cooling machines since the cooling load is generally high when solar radiation is high. This thesis examines the performance of PV/T solar collector manufactured by Solarus company in a solar cooling system for an office building in Dubai, New Delhi, Los Angeles and Cape Town. The study is carried out by analyzing climate data and the requirements for thermal comfort in office buildings. Cooling systems strongly depend on weather conditions and local climate. Cooling load of buildings depend on many parameters such as ambient temperature, indoor comfort temperature, solar gain to the building and internal gains including; number of occupant and electrical devices. The simulations were carried out by selecting a suitable thermally driven chiller and modeling it with PV/T solar collector in Polysun software. Fractional primary energy saving and solar fraction were introduced as key figures of the project to evaluate the performance of cooling system. Several parametric studies and simulations were determined according to PV/T aperture area and hot water storage tank volume. The fractional primary energy saving analysis revealed that thermally driven chillers, particularly adsorption chillers are not suitable to be utilizing in small size of solar cooling systems in hot and tropic climates such as Dubai and New Delhi. Adsorption chillers require more thermal energy to meet the cooling load in hot and dry climates. The adsorption chillers operate in their full capacity and in higher coefficient of performance when they run in a moderate climate since they can properly reject the exhaust heat. The simulation results also indicated that PV/T solar collector have higher efficiency in warmer climates, however it requires a larger size of PV/T collectors to supply the thermally driven chillers for providing cooling in hot climates. Therefore using an electrical chiller as backup gives much better results in terms of primary energy savings, since PV/T electrical production also can be used for backup electrical chiller in a net metering mechanism.