Development, capabilities and technology : an evaluative framework

In this paper we present a framework to be used for evaluation of Information and Communication Technology for Development (ICT4D) projects. The framework is based on Sen´s notion of development as freedom where human capabilities and functionings are seen as key aspects to development. Sen´s capability approach presents an alternative way of seeing and evaluating development (alternative to more traditional ways of measuring development). The approach is based on expanding freedoms, or eliminating unfreedoms, for people so that they can live a life that they have reason to value. Even though Sen is referenced a lot in ICT4D literature the analysis rarely goes further then stating that Sen presents an alternative to traditional ways of development. Reasons can be that the capability approach does not specifically mention technology, in addition to the lack of guidelines presented by Sen on how to use the framework. The aim of this paper is to operationalize the evaluation process and to include a clear role for technology in Sen´s capability framework. The framework is validated with a case on distance education from Bangladesh. 

Combined solar and pellet heating systems for single-family houses : How to achieve decreased electricity usage, increased system efficiency and increased solar gains

In Sweden, there are about 0.5 million single-family houses that are heated by electricity alone, and rising electricity costs force the conversion to other heating sources such as heat pumps and wood pellet heating systems. Pellet heating systems for single-family houses are currently a strongly growing market. Future lack of wood fuels is possible even in Sweden, and combining wood pellet heating with solar heating will help to save the bio-fuel resources. The objectives of this thesis are to investigate how the electrically heated single-family houses can be converted to pellet and solar heating systems, and how the annual efficiency and solar gains can be increased in such systems. The possible reduction of CO-emissions by combining pellet heating with solar heating has also been investigated. Systems with pellet stoves (both with and without a water jacket), pellet boilers and solar heating have been simulated. Different system concepts have been compared in order to investigate the most promising solutions. Modifications in system design and control strategies have been carried out in order to increase the system efficiency and the solar gains. Possibilities for increasing the solar gains have been limited to investigation of DHW-units for hot water production and the use of hot water for heating of dishwashers and washing machines via a heat exchanger instead of electricity (heat-fed appliances). Computer models of pellet stoves, boilers, DHW-units and heat-fed appliances have been developed and the parameters for the models have been identified from measurements on real components. The conformity between the models and the measurements has been checked. The systems with wood pellet stoves have been simulated in three different multi-zone buildings, simulated in detail with heat distribution through door openings between the zones. For the other simulations, either a single-zone house model or a load file has been used. Simulations were carried out for Stockholm, Sweden, but for the simulations with heat-fed machines also for Miami, USA. The foremost result of this thesis is the increased understanding of the dynamic operation of combined pellet and solar heating systems for single-family houses. The results show that electricity savings and annual system efficiency is strongly affected by the system design and the control strategy. Large reductions in pellet consumption are possible by combining pellet boilers with solar heating (a reduction larger than the solar gains if the system is properly designed). In addition, large reductions in carbon monoxide emissions are possible. To achieve these reductions it is required that the hot water production and the connection of the radiator circuit is moved to a well insulated, solar heated buffer store so that the boiler can be turned off during the periods when the solar collectors cover the heating demand. The amount of electricity replaced using systems with pellet stoves is very dependant on the house plan, the system design, if internal doors are open or closed and the comfort requirements. Proper system design and control strategies are crucial to obtain high electricity savings and high comfort with pellet stove systems. The investigated technologies for increasing the solar gains (DHW-units and heat-fed appliances) significantly increase the solar gains, but for the heat-fed appliances the market introduction is difficult due to the limited financial savings and the need for a new heat distribution system. The applications closest to market introduction could be for communal laundries and for use in sunny climates where the dominating part of the heat can be covered by solar heating. The DHW-unit is economical but competes with the internal finned-tube heat exchanger which is the totally dominating technology for hot water preparation in solar combisystems for single-family houses.

ICT as a tool in English teaching : A literature review on the use of ICT for Swedish students with learning difficulties and their literacy learning in grades 7-9

Information and communication technology (ICT) is a subject that is being discussed as a tool that is used within education around the world. Furthermore it can be seen as a tool for teachers to individualize students´ education. Students with literacy difficulties, such as dyslexia, are in constant need of new ways to learn, and new ways to be motivated to learn. The aim of this study is to see what research says in regard to how ICT can be used as a tool to help students with literacy difficulties. Literacy difficulties can be due to a number of things, such as the student has not been taught how to read, trouble within the family which can cause distress, or a neurological disorder such as dyslexia. Furthermore, the main research questions will focus on how ICT can be compared to traditional education forms, such as books and a more teacher centered education within the classroom, and whether ICT can be preferred. The results of this literature review indicates that ICT can be seen as a way for teachers to help students with literacy difficulties gain more self-esteem – something the literature tells us students with learning difficulties lack. The results also show how ICT can lead to a more individualized education. This is due to tools that increase reading comprehension and tools that give direct response when working with ICT, which helps students work more independently.

MLCMS actual use, perceived use, and experiences of use

Mobile learning involves use of mobile devices to participate in learning activities. Most elearning activities are available to participants through learning systems such as learning content management systems (LCMS). Due to certain challenges, LCMS are not equally accessible on all mobile devices. This study investigates actual use, perceived usefulness and user experiences of LCMS use on mobile phones at Makerere University in Uganda. The study identifies challenges pertaining to use and discusses how to improve LCMS use on mobile phones. Such solutions are a cornerstone in enabling and improving mobile learning. Data was collected by means of focus group discussions, an online survey designed based on the Technology Acceptance Model (TAM), and LCMS log files of user activities. Data was collected from two courses where Moodle was used as a learning platform. The results indicate positive attitudes towards use of LCMS on phones but also huge challenges whichare content related and technical in nature.

Mechanical and tribological properties of PVD-coated cemented carbide as evaluated by a new multi-pass scratch testing method

A new test method based on multipass scratch testing has been developed for evaluating the mechanical and tribological properties of thin, hard coatings. The proposed test method uses a pin-on-disc tribometer and during testing a Rockwell C diamond stylus is used as the “pin” and loaded against the rotating coated sample. The influence of normal load on the number of cycles to coating damage is investigated and the resulting coating damage mechanisms are evaluated by posttest scanning electron microscopy. The present study presents the test method by evaluating the performance of Ti0.86Si0.14N, Ti0.34Al0.66N, and (Al0.7Cr0.3)2O3 coatings deposited by cathodic arc evaporation on cemented carbide inserts. The results show that the test method is quick, simple, and reproducible and can preferably be used to obtain relevant data concerning the fatigue, wear, chipping, and spalling characteristics of different coating-substrate composites. The test method can be used as a virtually nondestructive test and, for example, be used to evaluate the fatigue and wear resistance as well as the cohesive and adhesive interfacial strength of coated cemented carbide inserts prior to cutting tests.