Print quality study of newsprint : Further development of the laboratoryoffset press at PAPRO

A laboratory offset press has been developed over the last five years at PAPRO for testing print qualityon newsprint, as at present, there is no good way for the mills to test this issue. In this project a comparisonhas been made between a laboratory offset press and a commercial press to see if the laboratoryoffset press can be used as a reliable test method or if a further development is needed.To evaluate the method, similar papers have been printed in both presses and compared using imageanalysis techniques. All together eighteen samples were tested which is enough to give comparableresults. The print quality showed a high variation, the values from the laboratory offset press and thecommercial press were not following the same trends. At present time the laboratory offset press needsome further development before it can be used as a reliable test method for halftone prints. Even sosome conclusions were made.The newsprint that has been used came from Norske Skog Tasman Mill (Kawerau), since the otheraim of this project was to do a repeatability study of their three existing paper machines to distinguishpossible differences in the production. The paper samples were taken from each paper machine on sixdifferent dates to give a representative result. This also gave the opportunity to compare the machinesbetween themselves. Comparison between the machines shows that the wire side gives a better andmore even result than the topside on the prints from the laboratory offset press. According to the resultfrom the commercial press the wire side shows a higher degree of variability. Samples from papermachine 2 and 3 were less variable and had the lowest standard deviation of grey level for solid areas.This suggests that newsprints from PM 2 and PM 3 give a more even print quality with a better inkcoverage.

Färgstyrning av kontorsutrustning

Color management has become more common now than ever in the graphic trade. Calibration andcharcterization are words that are mentioned very often when it comes to controlling colors andwhen you want a printed picture to look the same as an original photograph. The problem is thatthere are not so many people that has the knowlegde about this subject. Even if a printer supportscolor management it is not sure that the result is going to be satisfied and that a printed picture isgoing to look the same as the original.The printers which were used were Hp DeskJet 970 Cxi, Xerox Docu Color 12 and AgfaChromapress 50i. The theory of color, colour management and the equipment which were usedare described in the first stage. The second stage describes calibration and characterization ofmonitors, scanners and printers. Finally the result of created ICC-profiles is set by visual comparisionof a photographs original colours and a scanned and printed photograph.The results of calibration and characterization were varying a lot. Agfa Chromapress 50i was theonly printer which could produce a succesful calibration. Agfa Chromapress 50i and XeroxDocuColor 12 gave the best results when comparing original photographs with printed pictures ifthey were separated with ICC-profiles. ICC-profiles created for Hp DeskJet 970 Cxi achievedundesirable effects. This was the only printer that gave a bad result both with and without ICCprofiles.The reason for this miserable result can depend on the printers unability to fully supportcolor management.

Alternativa förpackningsmaterial och konstruktioner för »Hackman tools«-serien

Choosing a new plastic material for a container includes several different steps. In this case,the Finnish company Hackman needed a new type of packaging material for theircutlery- and kitchentool series »Hackman tools«. The project was carried out in cooperationwith the design agency Ytterborn & Fuentes, which has Hackman as a client.Several different demands were put on the material in order to fulfill as many of the clientswishes as possible. The most urgent problem with the existing container was the difficultysfor the customer to clearly see the contents in the container. Because of this problemthe customer tried to open the container in the shop. To avoid this from happening,Hackman wanted a more transparent plastic material that still fulfilled all other necessaryproperties such as strength, viscosity, printability, sealability and exhaustion strength.The final result and recommendation of a polypropylen-plastic (Evacast) was based ondetailed studies of packaging plastics and their properties as well as discussions with plasticconvertersand suppliers. The recommended plastic is avaliable in several different modelsthat fulfill all demands on material properties, environmental aspects, cost aspects and transparency.Apart from the material problem the project also included drafting some sketches and ideason new construction solutions for the container. The construction of the exsisting containerwas also a problem because of its complexity. As a result of the change of material it has beenpossible to simplify the construction.

Grafisk profilering och identitetsskapande

This degree project has been done in parallel to the advertising agency Hera in Uppsala, and containsthe creating of a logotype and graphic profile for Aircall, a new big chain of shops dealing with telecommunication.Aircall was found 1 February 2004, when three smaller companies became one. Thisnew company were in need of a common brand and a uniform profile. The created graphic profile hasbeen applied to visiting cards, letterhead, envelopes, letter cards, bags, cars and advertisement. Thegraphic profile has also been used when designing the shop interior end exterior. Research has beendone on competitors graphic profiles and advertisement. The project also contains a deepening in corporateidentity.

Redesign av personaltidningen Energitrycket samt anpassning för kopiering och publicering för webben

This degree project has been carried out on the commission of AB Borlänge Energi. The purpose of thisproject was to redesign the magazine Energitrycket. The magazine should inform about the current eventsat the company. The work consisted of redesign of the existing magazine and adjustment to copying andpublishing on the web.This project also contains a research about how paper and colour affect the print results. It shows thatthe maximum contrast and sharp image reproduction is best achieved on woodfree, coated, calenderedpaper with high whiteness. An uncoated, light yellow paper is however to recommend for a printed matterswith a lot of text.It also shows that every production unit reproduces colours differently. To get a good colour reproductionand a good communication between these units, they must be calibrated, and well-functioningICC-profiles must be created.

Trycksaker till Utvecklingshuset och Skönhetsbanken

A number of publications has been produced for two companies in Dalarna, Utvecklingshuset andSkönhetsbanken.Utvecklingshuset is working, among other things, with stressyndroms and by treating crises. Theirpublications consist of a number of product sheets, a folder and a brochure. They want to use the publicationsfor information to their customers.Skönhetsbanken is a beauty saloon who will have a brochure to mediate the services they can offer.Photos have been taken, existing and for this purpose written texts have been used.The softwares Adobe Photoshop 7.0 and Adobe Indesign 2.0 have been used for all publications andthe work with producing these has been satisfactory.The effect of a good cooperation with the companies has resulted in that they are pleased with thepublications and feel that they have been part of the end of the results.All of the publications have been or will be printed with digital printing methods, which is the reasonfor the choice of the litterature survey.The survey deals with, among other things, how the digital press works, which papers that are suitable,economic aspects and what a graphic designer should have in mind when it comes to graphic productsthat will be printed with digital printing methods.

Vitpunktsförskjutningens påverkan på ICC-profiler vid användande av optiska vitmedel

The connection between fluorescence and color management still is a relatively unexplored area. Thefollowing composition analyses the theory that when printing on fluorescent ink jet paper using ICCprofilesa more yellow print will appear. In theory the ICC-profile compensate for blue light that fluorescefrom the paper with the complementary color, yellow. The human eye apprehands this fluorescentlight as white.When categorizing a number of ink jet qualities some tests to indicate change of color in the final printwere made. Five qualities were chosen for further analyses, each with different white point. TheTC3.5CMYK target was prined on an ink jet printer and measured with different filters for the measurementequipment, GretagMacbeth Spectrolino. U- and UV-filters were used during the testings.From the measurement data ICC-profiles were made to make it possible to watch how the profiles compensatefor the blue change of color that appeared in the data. Although a distinct change of color intoblue were discernible in the measured data there is no evident proof that this cause a final print thatis more yellow. Other conclusions and results are to be read at the end of this composition.

Informationssäkerhet inom grafiska företag

The study shows the current need for security solutions concerning work with information in different areas.Investigations will show important solutions for printers’ needs to meet the increasingly harder demands forfast and safe digital communications. Important factors to be analyzed in the investigations are: access todifferent types of information, workers authority of information, access to the data base register internallyand externally, production solutions for an effective fault detection and data base solutions fororders and distribution.Planned and unplanned stops result in a standard of value in interruptions. Internal data bases areprotected by so-called “Fire Walls”, “Watch Dogs” and Virtual Private Networks. Offset plates are locked infor a definitive range of time. Subsequent destruction and remaining sheets are shredded and recycled. Alldocumentation is digital, in business control systems, which guarantees that no important documents arelying around in working places. Fault detection work is facilitated by the ability to fully track the order numberson incoming orders.

Corporate identity through graphic design

The degree project has been implemented abroad in Brisbane, Australia. A literature study has beenperformed parallel to the practical work within the subject »Corporate identity through graphicaldesign«. In this study deeper research has been made concerning the establishment and manifestationof a corporate identity and its program. The knowledge given from this study has been put into practicethrough two larger projects.The first project was carried out at De Pasquale, advertising agency in Brisbane, where a corporateidentity program was designed for a new company. The company is a fitness centre, called KnockoutFitness, which specializes in different types of boxing training sessions such as Boxing, Thai Bow andBoxercise but also Aqua aerobics. They needed a full corporate identity program including a logotype,business card, letter paper-paper and address labels.The second project was carried out at Queensland University of Technology in Brisbane. A promotioncampaign was designed for the Department of Visual Arts, which included two information folders andone advertisement. The purpose of the campaign was to promote both the undergraduate and postgraduatecourses offered within the department.

Konstruktion och design av två glassförpackningar i kartongkvaliteten Frövi Light

This degree project was made in cooperation with AssiDomän Frövi and Charlotte Andersson and the main objectivehas been to create to ice cream pacbges from 250 gsm Frövi Light board. The paekages are intended to be easilyresealable while decreasing in size together with the ice cream. The project also describes the food packaging labelsand symbols currently present in the European common market.Both capsules utilize a separate lid for resealing. One of the paekages (Capsuie A) is indended to be cut along withthe ice cream and thereby decrease in size. The other one (Capsuie B) uses a series of flaps for contracting and expandingwhich enab1es adjusting of the size without cutting the package up.The design for Capsuie A is created both as a series of flavours with a super-hero theme intended for children andwith a colfee flavour for a maturer audience. For Capsule B, a design was created for a sorbet.

Materialundersökning

This report emphasizes the importance of seeing a university as a company that offers a service. It isimportant to see the different quality dimensions that distinguish a service. The customer-focused planninghas also set the structure of this degree project.The marketing investigation is based on recruit questionnaires and interviews with secondary schoolstudents. The questionnaires show that the catalogue still reaches out with most information despiteconstant increase of information search at the Internet. The students seem to prefer University ofKristianstad´s catalogue front.The competition analysis is based on telephone interviews and information material sent from theother universities. Structure, usage of the graphic profile amongst more is reviewed for every university.The answers have varied a lot but there are few that have a good structure. University of Dalarna´sinformation material has neither structure nor a homogenous look.The employees at University of Dalarna are not using the universities graphic profile. They are alsodissatisfied regarding the absence of pre-produced, general overhead film series. The internal analysisalso shows that the employees don’t know which material is accessible or where to find it.

Processanalys vid Color Print Sweden AB med fokusering på prepressavdelningen

This thesis work has introduced process orientation at the printing company Color Print Sweden AB. The outcome ofthis work is a survey of the work flow at the prepress department. To visualise the production process at the companya comprehensive mapping of the main process, order-to-delivery, has been made. The work has detected a couple ofcritical elements in the existing process. These elements are the following: initial check of material delivered to the prepressdepartment as well as the control made of the plotter print-out, digital test print and plate. To guarantee the qualityof the prints it is very important that the work made in the prepress department is optimized. This survey can thereforebe used as a basis for continuous improvement in the processes at Color Print Sweden AB. This work has alsoresulted in a template that Color Print Sweden AB can use to design routine descriptions to ensure that specific worktasks are performed the right way by everyone and all the time.

Framtagning av ICC-profil för VTAB Backa

The following degree project deals with the production of an ICC-profile, this in the form ofproducing ICC-profiles for VTAB Backa. The company previously had their own profile butthey weren’t satisfied, so earlier this year they started using the TU standard profile, but theyalso wanted a complement to this in form of a profile created for solely their printing press.The separation settings used when creating the new profiles were based on information fromTU and their profile. Two basic profiles were created and then edited to obtain a better result.The test printings made with the edited profiles showed that the less adjustments that are made,the better. It was also discovered that the TU standard profile eliminates the highlight toneswhiles the new profiles are somewhat darker. VTAB Backa has at the end of this degree projectdesided to conduct more test printings before making their decision.

Reproduktionens inverkan på det slutliga tryckresultatet med djuptryck på MF-papper

To get an optimal print result with rotogravure on improved newsprint, MF-paper, knowledge aboutwhat adjustment that should be done through the whole production is needed. This degree project investigatesthe reproduction’s effect on the final print result.A test print is done at Quebecor World Nordic Interprint´s regular print unit. The evaluation of theprint shows how important the use of a unit adjusted ICC-profile is for the print quality. A comparisonbetween the two separation methods GCR and UCR shows that Interprint´s present ICC-profile, usingUCR as separation method, gives less missing dots. When the cylinder that prints the black ink isengraving whit a slower speed than normal the result shows that the colour becomes a little darker, thedetails becomes clear but the difference is very small.

Studie till uppstartande av annonskatalog

Sten Jonsson wants to start a production of an advertising catalogue for small companies in Sweden. Acatalogue where the advertisingcost is so low that most of the companies can afford to participate. Thecompanies who will advertise should be manufacturing companies in trades of carpentry, sheet metalworkshops, forging workshops and engineering workshops.The catalogue will facilitate for the manufacturer to reach the costumer without any middleman.Without a middleman creates a possibility for an opinion about the product at the same time as theprice can be held low. A catalogue of this type would benefit the marketing of the companies at the sametime as it would generate an occasion for innovations.The possible target groups are property companies, construct companies and farmers.A market research has been carried out contained a postal interview and a phone interview. Themarket research carried out to get an understanding in what the companies think about the idea butalso to see if the companies are in interest of advertise in the catalogue. Unfortunately the marketresearch became unusable when only three of thirty companies comment the idea and two of themwanted to meet for a further visit. In relation to the market research a deeper study in market research,in which essential parts for the project, was made.A dummie has been done to show the design of the catalogue.A calculation has also been done to get an understanding in what the project would cost to start.