Participatory research approaches in the development of improved management practices in indigenous chickens production systems with smallholder farmers in Kenya

This thesis is concerned with development of improved management practices in indigenous chicken production systems in a research process that includes participatory approaches with smallholder farmers and other stakeholders in Kenya. The research process involved a wide range of activities that included on-station experiments, field surveys, stakeholder consultations in workshops, seminars and visits, and on-farm farmer participatory research to evaluate the effect of some improved management interventions on production performance of indigenous chickens. The participatory research was greatly informed from collective experiences and lessons of the previous activities. The on-station studies focused on hatching, growth and nutritional characteristics of the indigenous chickens. Four research publications from these studies are included in this thesis. Quantitative statistical analyses were applied and they involved use of growth models estimated with non-linear regressions for the growth characteristics, chi-square determinations to investigate differences among different reciprocal crosses of indigenous chickens and general linear models and covariance determination for the nutrition study. The on-station studies brought greater understanding of performance and production characteristics of indigenous chickens and the influence of management practices on these characteristics. The field surveys and stakeholder consultations helped in understanding the overarching issues affecting the productivity of the indigenous chickens systems and their place in the livelihoods of smallholder farmers. These activities created strong networking opportunities with stakeholders from a wide spectrum. The on-farm farmer participatory research involved selection of 200 farmers in five regions followed by training and introduction of interventions on improved management practices which included housing, vaccination, deworming and feed supplementation. Implementation and monitoring was mainly done by individual farmers continuously for close to one and half years. Six quarterly visits to the farms were made by the research team to monitor and provide support for on-going project activities. The data collected has been analysed for 5 consecutive 3-monthly periods. Descriptive and inferential statistics were applied to analyse the data collected involving treatment applications, production characteristics and flock demography characteristics. Out of the 200 farmers initially selected, 173 had records on treatment applications and flock demography characteristics while 127 farmers had records on production characteristics. The demographic analysis with a dissimilarity index of flock size produced 7 distinct farm groups from among the 173 farms. Two of these farm groups were represented in similar numbers in each of the five regions. The research process also involved a number of dissemination and communication strategies that have brought the process and project outcomes into the domain of accessibility by wider readership locally and globally. These include workshops, seminars, field visits and consultations, local and international conferences, electronic conferencing, publications and personal communication via emailing and conventional posting. A number of research and development proposals were also developed based on the knowledge and experiences gained from the research process. The thesis captures the research process activities and outcomes in 8 chapters which include in ascending order – introduction, theoretical concepts underpinning FPR, research methodology and process, on-station research output, FPR descriptive statistical analysis, FPR inferential statistical analysis on production characteristics, FPR demographic analysis and conclusions. Various research approaches both quantitative and qualitative have been applied in the research process indicating the possibilities and importance of combining both systems for greater understanding of issues being studied. In our case, participatory studies of the improved management of indigenous chickens indicates their potential importance as livelihood assets for poor people.

Exposure to space radiation of high-performance infrared multilayer-filters and materials technology experiments

Infrared multilayer interference filters have been used extensively in satellite radiometers for about 15 years. Filters manufactured by the University of Reading have been used in Nimbus 5, 6, and 7, TIROS N, and the Pioneer Venus orbiter. The ability of the filters to withstand the space environment in these applications is critical; if degradation takes place, the effects would range from worsening of signal-to-noise performance to complete system failure. An experiment on the LDEF will enable the filters, for the first time, to be subjected to authoritative spectral measurements following space exposure to ascertain their suitability for spacecraft use and to permit an understanding of degradation mechanisms.

Estimating surface CO2 fluxes from space-borne dry air mole fraction observations using an Ensemble Kalman filter

We have developed an ensemble Kalman Filter (EnKF) to estimate 8-day regional surface fluxes of CO2 from space-borne CO2 dry-air mole fraction observations (XCO2) and evaluate the approach using a series of synthetic experiments, in preparation for data from the NASA Orbiting Carbon Observatory (OCO). The 32-day duty cycle of OCO alternates every 16 days between nadir and glint measurements of backscattered solar radiation at short-wave infrared wavelengths. The EnKF uses an ensemble of states to represent the error covariances to estimate 8-day CO2 surface fluxes over 144 geographical regions. We use a 12×8-day lag window, recognising that XCO2 measurements include surface flux information from prior time windows. The observation operator that relates surface CO2 fluxes to atmospheric distributions of XCO2 includes: a) the GEOS-Chem transport model that relates surface fluxes to global 3-D distributions of CO2 concentrations, which are sampled at the time and location of OCO measurements that are cloud-free and have aerosol optical depths <0.3; and b) scene-dependent averaging kernels that relate the CO2 profiles to XCO2, accounting for differences between nadir and glint measurements, and the associated scene-dependent observation errors. We show that OCO XCO2 measurements significantly reduce the uncertainties of surface CO2 flux estimates. Glint measurements are generally better at constraining ocean CO2 flux estimates. Nadir XCO2 measurements over the terrestrial tropics are sparse throughout the year because of either clouds or smoke. Glint measurements provide the most effective constraint for estimating tropical terrestrial CO2 fluxes by accurately sampling fresh continental outflow over neighbouring oceans. We also present results from sensitivity experiments that investigate how flux estimates change with 1) bias and unbiased errors, 2) alternative duty cycles, 3) measurement density and correlations, 4) the spatial resolution of estimated flux estimates, and 5) reducing the length of the lag window and the size of the ensemble. At the revision stage of this manuscript, the OCO instrument failed to reach its orbit after it was launched on 24 February 2009. The EnKF formulation presented here is also applicable to GOSAT measurements of CO2 and CH4.

Design and analysis of climate model experiments for the efficient estimation of anthropogenic signals

Presented herein is an experimental design that allows the effects of several radiative forcing factors on climate to be estimated as precisely as possible from a limited suite of atmosphere-only general circulation model (GCM) integrations. The forcings include the combined effect of observed changes in sea surface temperatures, sea ice extent, stratospheric (volcanic) aerosols, and solar output, plus the individual effects of several anthropogenic forcings. A single linear statistical model is used to estimate the forcing effects, each of which is represented by its global mean radiative forcing. The strong colinearity in time between the various anthropogenic forcings provides a technical problem that is overcome through the design of the experiment. This design uses every combination of anthropogenic forcing rather than having a few highly replicated ensembles, which is more commonly used in climate studies. Not only is this design highly efficient for a given number of integrations, but it also allows the estimation of (nonadditive) interactions between pairs of anthropogenic forcings. The simulated land surface air temperature changes since 1871 have been analyzed. The changes in natural and oceanic forcing, which itself contains some forcing from anthropogenic and natural influences, have the most influence. For the global mean, increasing greenhouse gases and the indirect aerosol effect had the largest anthropogenic effects. It was also found that an interaction between these two anthropogenic effects in the atmosphere-only GCM exists. This interaction is similar in magnitude to the individual effects of changing tropospheric and stratospheric ozone concentrations or to the direct (sulfate) aerosol effect. Various diagnostics are used to evaluate the fit of the statistical model. For the global mean, this shows that the land temperature response is proportional to the global mean radiative forcing, reinforcing the use of radiative forcing as a measure of climate change. The diagnostic tests also show that the linear model was suitable for analyses of land surface air temperature at each GCM grid point. Therefore, the linear model provides precise estimates of the space time signals for all forcing factors under consideration. For simulated 50-hPa temperatures, results show that tropospheric ozone increases have contributed to stratospheric cooling over the twentieth century almost as much as changes in well-mixed greenhouse gases.

Parallel implementation and one year experiments with the Danish Eulerian Model

Large scale air pollution models are powerful tools, designed to meet the increasing demand in different environmental studies. The atmosphere is the most dynamic component of the environment, where the pollutants can be moved quickly on far distnce. Therefore the air pollution modeling must be done in a large computational domain. Moreover, all relevant physical, chemical and photochemical processes must be taken into account. In such complex models operator splitting is very often applied in order to achieve sufficient accuracy as well as efficiency of the numerical solution. The Danish Eulerian Model (DEM) is one of the most advanced such models. Its space domain (4800 × 4800 km) covers Europe, most of the Mediterian and neighboring parts of Asia and the Atlantic Ocean. Efficient parallelization is crucial for the performance and practical capabilities of this huge computational model. Different splitting schemes, based on the main processes mentioned above, have been implemented and tested with respect to accuracy and performance in the new version of DEM. Some numerical results of these experiments are presented in this paper.

Preliminary results from the infrared multilayer filters and materials exposed to the space environment on the NASA LDEF mission

With continually increasing demands for improvements to atmospheric and planetary remote-sensing instrumentation, for both high optical system performance and extended operational lifetimes, an investigation to access the effects of prolonged exposure of the space environment to a series of infrared interference filters and optical materials was promoted on the NASA LDEF mission. The NASA Long Duration Exposure Facility (LDEF) was launchd by the Space Shuttle to transport various science and technology experiments both to and from space, providing investigators with the opportunity to study the effects of the space environment on materials and systems used in space-flight applications. Preliminary results to be discussed consist of transmission measurements obtained and processed from an infrared spectrophotometer both before (1983) and after (1990) exposure compared with unexposed control specimens, together with results of detailed microscopic and general visual examinations performed on the experiment. The principle lead telluride (PbTe) and Zinc Sulphide (ZnS) based multilayer filters selected for this preliminary investigation consist of : an 8-12µm low pass edge filter, a 10.6µm 2.5% half bandwidth (HBW) double half-wave narrow bandpass filter, and a 10% HBW triple half-wave wide bandpass filter at 15µm. Optical substrates of MgF2 and KRS-5 (T1BrI) will also be discussed.

A demonstration of 'broken' visual space

It has long been assumed that there is a distorted mapping between real and ‘perceived’ space, based on demonstrations of systematic errors in judgements of slant, curvature, direction and separation. Here, we have applied a direct test to the notion of a coherent visual space. In an immersive virtual environment, participants judged the relative distance of two squares displayed in separate intervals. On some trials, the virtual scene expanded by a factor of four between intervals although, in line with recent results, participants did not report any noticeable change in the scene. We found that there was no consistent depth ordering of objects that can explain the distance matches participants made in this environment (e.g. A > B > D yet also A < C < D) and hence no single one-to-one mapping between participants’ perceived space and any real 3D environment. Instead, factors that affect pairwise comparisons of distances dictate participants’ performance. These data contradict, more directly than previous experiments, the idea that the visual system builds and uses a coherent 3D internal representation of a scene.

Does tool use extend peripersonal space? A review and re-analysis

The fascinating idea that tools become extensions of our body appears in artistic, literary, philosophical, and scientific works alike. In the last fifteen years, this idea has been re-framed into several related hypotheses, one of which states that tool use extends the neural representation of the multisensory space immediately surrounding the hands (variously termed peripersonal space, peri-hand space, peri-cutaneous space, action space, or near space). This and related hypotheses have been tested extensively in the cognitive neurosciences, with evidence from molecular, neurophysiological, neuroimaging, neuropsychological, and behavioural fields. Here, I briefly review the evidence for and against the hypothesis that tool use extends a neural representation of the space surrounding the hand, concentrating on neurophysiological, neuropsychological, and behavioural evidence. I then provide a re-analysis of data from six published and one unpublished experiments using the crossmodal congruency task to test this hypothesis. While the re-analysis broadly confirms the previously-reported finding that tool use does not literally extend peripersonal space, the overall effect-sizes are small and statistical power is low. I conclude by questioning whether the crossmodal congruency task can indeed be used to test the hypothesis that tool use modifies peripersonal space.

Cyborgs in space

Practical realisation of Cyborgs opens up significant new opportunities in many fields. In particular when it comes to space travel many of the limitations faced by humans, in stand-alone form, are transposed by the adoption of a cyborg persona. In this article a look is taken at different types of Brain-Computer interface which can be employed to realise Cyborgs, biology-technology hybrids. e approach taken is a practical one with applications in mind, although some wider implications are also considered. In particular results from experiments are discussed in terms of their meaning and application possibilities. e article is written from the perspective of scientific experimentation opening up realistic possibilities to be faced in the future rather than giving conclusive comments on the technologies employed. Human implantation and the merger of biology and technology are though important elements.

The effect of rapid changes in ionospheric flow on velocity vectors deduced from radar beam-swinging experiments

The effects on the horizontal ionospheric velocity vectors deduced from radar beam-swinging experiments, which occur when changes in the flow take place on short time scales compared with the experiment cycle time, are analysed in detail. The further complications which arise in the interpretation of beam-swinging data, due to longitudinal gradients in the flow and to field-aligned flows, are also considered. It is concluded that these effects are unlikely to seriously compromise statistical determinations of the response time of the flow, e.g. to changes in the north-south component of the IMF, such as have been recently reported by Etemadiet al. (1988, Planet. Space Sci.36, 471), using EISCAT ‘Polar’ data.