Time-resolved gas-phase kinetic and quantum chemical studies of the reaction of silylene with nitric oxide

Time-resolved kinetic studies of the reaction of silylene, SiH2, generated by laser flash photolysis of phenylsilane, have been carried out to obtain rate constants for its bimolecular reaction with NO. The reaction was studied in the gas phase over the pressure range 1-100 Torr in SF6 bath gas at five temperatures in the range 299-592 K. The second-order rate constants at 10 Torr fitted the Arrhenius equation log(k/cm(3) molecule(-1) s(-1)) = (- 11.66 +/- 0.01) + (6.20 +/- 0.10 kJ mol(-1))IRT In 10 The rate constants showed a variation with pressure of a factor of ca. 2 over the available range, almost independent of temperature. The data could not be fitted by RRKM calculations to a simple third body assisted association reaction alone. However, a mechanistic model with an additional (pressure independent) side channel gave a reasonable fit to the data. Ab initio calculations at the G3 level supported a mechanism in which the initial adduct, bent H2SiNO, can ring close to form cyclo-H2SiNO, which is partially collisionally stabilized. In addition, bent H2SiNO can undergo a low barrier isomerization reaction leading, via a sequence of steps, ultimately to dissociation products of which the lowest energy pair are NH2 + SiO. The rate controlling barrier for this latter pathway is only 16 kJ mol(-1) below the energy of SiH2 + NO. This is consistent with the kinetic findings. A particular outcome of this work is that, despite the pressure dependence and the effects of the secondary barrier (in the side reaction), the initial encounter of SiH2 with NO occurs at the collision rate. Thus, silylene can be as reactive with odd electron molecules as with many even electron species. Some comparisons are drawn with the reactions of CH2 + NO and SiCl2 + NO.

Synthesis and characterization of thermally stable second-order nonlinear optical side-chain polyimides containing thiazole and benzothiazole push-pull chromophores

Push-pull nonlinear optical (NLO) chromophores containing thiazole and benzothiazole acceptors were synthesized and characterized. Using these chromophores a series of second-order NLO polyimides were Successfully prepared from 4,4'-(hexafluoroisopropylidene) diphthalic anhydride (6FDA), pyromellitic dianhydride (PMDA) and 3,3'4,4'-benzophenone tetracarboxylic dianhydride (BTDA) by a standard condensation polymerization technique. These polyimides exhibit high glass transition temperatures ranging from 160 to 188 degrees C. UV-vis spectrum of polyimide exhibited a slight blue shift and decreases in absorption due to birefringence. From the order parameters, it was found that chromophores were aligned effectively. Using in situ poling and temperature ramping technique, the optical temperatures for corona poling were obtained. It was found that the optimal temperatures of polyimides approach their glass transition temperatures. These polyimides demonstrate relatively large d(33) values range between 35.15 and 45.20 pm/V at 532 nm. (C) 2008 Elsevier B.V. All rights reserved.

Detection of flood extent in urban areas using high resolution TerraSAR-X data

Flooding is a major hazard in both rural and urban areas worldwide, but it is in urban areas that the impacts are most severe. An investigation of the ability of high resolution TerraSAR-X data to detect flooded regions in urban areas is described. An important application for this would be the calibration and validation of the flood extent predicted by an urban flood inundation model. To date, research on such models has been hampered by lack of suitable distributed validation data. The study uses a 3m resolution TerraSAR-X image of a 1-in-150 year flood near Tewkesbury, UK, in 2007, for which contemporaneous aerial photography exists for validation. The DLR SETES SAR simulator was used in conjunction with airborne LiDAR data to estimate regions of the TerraSAR-X image in which water would not be visible due to radar shadow or layover caused by buildings and taller vegetation, and these regions were masked out in the flood detection process. A semi-automatic algorithm for the detection of floodwater was developed, based on a hybrid approach. Flooding in rural areas adjacent to the urban areas was detected using an active contour model (snake) region-growing algorithm seeded using the un-flooded river channel network, which was applied to the TerraSAR-X image fused with the LiDAR DTM to ensure the smooth variation of heights along the reach. A simpler region-growing approach was used in the urban areas, which was initialized using knowledge of the flood waterline in the rural areas. Seed pixels having low backscatter were identified in the urban areas using supervised classification based on training areas for water taken from the rural flood, and non-water taken from the higher urban areas. Seed pixels were required to have heights less than a spatially-varying height threshold determined from nearby rural waterline heights. Seed pixels were clustered into urban flood regions based on their close proximity, rather than requiring that all pixels in the region should have low backscatter. This approach was taken because it appeared that urban water backscatter values were corrupted in some pixels, perhaps due to contributions from side-lobes of strong reflectors nearby. The TerraSAR-X urban flood extent was validated using the flood extent visible in the aerial photos. It turned out that 76% of the urban water pixels visible to TerraSAR-X were correctly detected, with an associated false positive rate of 25%. If all urban water pixels were considered, including those in shadow and layover regions, these figures fell to 58% and 19% respectively. These findings indicate that TerraSAR-X is capable of providing useful data for the calibration and validation of urban flood inundation models.

Salt marsh morphodynamics: An investigation of tidal flows and marsh channel equilibrium

Although numerous field studies have evaluated flow and transport processes in salt marsh channels, the overall role of channels in delivering and removing material from salt marsh platforms is still poorly characterised. In this paper, we consider this issue based on a numerical hydrodynamic model for a prototype marsh system and on a field survey of the cross-sectional geometry of a marsh channel network. Results of the numerical simulations indicate that the channel transfers approximately three times the volume of water that would be estimated from mass balance considerations alone. Marsh platform roughness exerts a significant influence on the partitioning of discharge between the channel and the marsh platform edge, alters flow patterns on the marsh platform due to its effects on channel-to-platform transfer and also controls the timing of peak discharge relative to marsh-edge overtopping. Although peak channel discharges and velocities are associated with the flood tide and marsh inundation, a larger volume of water is transferred by the channel during ebb flows, a portion of which transfer takes place after the tidal height is below the marsh platform. Detailed surveys of the marsh channels crossing a series of transects at Upper Stiffkey Marsh, north Norfolk, England, show that the total channel cross-sectional area increases linearly with catchment area in the inner part of the marsh, which is consistent with the increase in shoreward tidal prism removed by the channels. Toward the marsh edge, however, a deficit in the total cross-sectional area develops, suggesting that discharge partitioning between the marsh channels and the marsh platform edge may also be expressed in the morphology of marsh channel systems.

Provision of information about drug side-effects to patients

To make informed decisions about taking medicinal drugs, people need accurate information about side-effects. A European Union guideline now recommends use of qualitative descriptions for five bands of risk, ranging from very rare (affecting < 0·01% of the population), to very common (>10%). We did four studies of more than 750 people, whom we asked to estimate the probability of having a side-effect on the basis of qualitative and quantitative descriptions. Our results showed that qualitative descriptions led to gross overestimation of risk. Until further work is done on how patients taking the drugs interpret these terms, the terms should not be used in drug information leaflets.

Communicating information about medication side effects: effects on satisfaction, perceived risk to health, and intention to comply

Previous research has shown that people's evaluations of explanations about medication and their intention to comply with the prescription are detrimentally affected by the inclusion of information about adverse side effects of the medication. The present study (Experiment 1) examined which particular aspects of information about side effects (their number, likelihood of occurrence, or severity) are likely to have the greatest effect on people's satisfaction, perception of risk, and intention to comply, as well as how the information about side effects interacts with information about the severity of the illness for which the medication was prescribed. Across all measures, it was found that manipulations of side effect severity had the greatest impact on people's judgements, followed by manipulations of side effect likelihood and then number. Experiments 2 and 3 examined how the severity of the diagnosed illness and information about negative side effects interact with two other factors suggested by Social Cognition models of health behaviour to affect people's intention to comply: namely, perceived benefit of taking the prescribed drug, and the perceived level of control over preventing or alleviating the side effects. It was found that providing people with a statement about the positive benefit of taking the medication had relatively little effect on judgements, whereas informing them about how to reduce the chances of experiencing the side effects had an overall beneficial effect on ratings.

Is 15 per cent very common? Informing people about the risks of medication side effects

Objectives - To assess the general public's interpretation of the verbal descriptors for side effect frequency recommended for use in medicine information leaflets by a European Union (EU) guideline, and to examine the extent to which differences in interpretation affect people's perception of risk and their judgments of intention to comply with the prescribed treatment. Method - Two studies used a controlled empirical methodology in which people were presented with a hypothetical, but realistic, scenario about visiting their general practitioner and being prescribed medication. They were given an explanation that focused on the side effects of the medicine, together with information about the probability of occurrence using either numerical percentages or the corresponding EU verbal descriptors. Interpretation of the descriptors was assessed. In study 2, participants were also required to make various judgments, including risk to health and intention to comply. Key findings - In both studies, use of the EU recommended descriptors led to significant overestimations of the likelihood of particular side effects occurring. Study 2 further showed that the "overestimation" resulted in significantly increased ratings of perceived severity of side effects and risk to health, as well as significantly reduced ratings of intention to comply, compared with those for people who received the probability information in numerical form. Conclusion - While it is recognised that the current findings require replication in a clinical setting, the European and national authorities should suspend the use of the EU recommended terms until further research is available to allow the use of an evidence-based approach.

Evaluating explanations about drug prescriptions: effects of varying the nature of information about side effects and its relative position in explanations

This study evaluates computer-generated written explanations about drug prescriptions that are based on an analysis of both patient and doctor informational needs. Three experiments examine the effects of varying the type of information given about the possible side effects of the medication, and the order of information within the explanation. Experiment 1 investigated the effects of these two factors on people's ratings of how good they consider the explanations to be and of their perceived likelihood of taking the medication, as well as on their memory for the information in the explanation. Experiment 2 further examined the effects of varying information about side effects by separating out the contribution of number and severity of side effects. It was found that participants in this study did not “like” explanations that described severe side effects, and also judged that they would be less likely to take the medication if given such explanations. Experiment 3 therefore investigated whether information about severe side effects could be presented in such a way as to increase judgements of how good explanations are thought to be, as well as the perceived likelihood of adherence. The results showed some benefits of providing additional explanatory information.

Extraction of tidal channel networks from aerial photographs alone and combined with laser altimetry

Tidal channel networks play an important role in the intertidal zone, exerting substantial control over the hydrodynamics and sediment transport of the region and hence over the evolution of the salt marshes and tidal flats. The study of the morphodynamics of tidal channels is currently an active area of research, and a number of theories have been proposed which require for their validation measurement of channels over extensive areas. Remotely sensed data provide a suitable means for such channel mapping. The paper describes a technique that may be adapted to extract tidal channels from either aerial photographs or LiDAR data separately, or from both types of data used together in a fusion approach. Application of the technique to channel extraction from LiDAR data has been described previously. However, aerial photographs of intertidal zones are much more commonly available than LiDAR data, and most LiDAR flights now involve acquisition of multispectral images to complement the LiDAR data. In view of this, the paper investigates the use of multispectral data for semiautomatic identification of tidal channels, firstly from only aerial photographs or linescanner data, and secondly from fused linescanner and LiDAR data sets. A multi-level, knowledge-based approach is employed. The algorithm based on aerial photography can achieve a useful channel extraction, though may fail to detect some of the smaller channels, partly because the spectral response of parts of the non-channel areas may be similar to that of the channels. The algorithm for channel extraction from fused LiDAR and spectral data gives an increased accuracy, though only slightly higher than that obtained using LiDAR data alone. The results illustrate the difficulty of developing a fully automated method, and justify the semi-automatic approach adopted.