Naturally occurring radioactive material (NORM) from a former phosphoric acid processing plant

In recent years there has been an increasing awareness of the radiological impact of non-nuclear industries that extract and/or process ores and minerals containing naturally occurring radioactive material (NORM). These industrial activities may result in significant radioactive contamination of (by-) products, wastes and plant installations. In this study, scale samples were collected from a decommissioned phosphoric acid processing plant. To determine the nature and concentration of NORM retained in pipe-work and associated process plant, four main areas of the site were investigated: (1) the 'Green Acid Plant', where crude acid was concentrated; (2) the green acid storage tanks; (3) the Purified White Acid (PWA) plant, where inorganic impurities were removed; and (4) the solid waste, disposed of on-site as landfill. The scale samples predominantly comprise the following: fluorides (e.g. ralstonite); calcium sulphate (e.g. gypsum); and an assemblage of mixed fluorides and phosphates (e.g. iron fluoride hydrate, calcium phosphate), respectively. The radioactive inventory is dominated by U-238 and its decay chain products, and significant fractionation along the series occurs. Compared to the feedstock ore, elevated concentrations (<= 8.8 Bq/g) of U-238 Were found to be retained in installations where the process stream was rich in fluorides and phosphates. In addition, enriched levels (<= 11 Bq/g) of Ra-226 were found in association with precipitates of calcium sulphate. Water extraction tests indicate that many of the scales and waste contain significantly soluble materials and readily release radioactivity into solution. (c) 2005 Elsevier Ltd. All rights reserved.

Trace element partitioning and soil particle characterisation around mining and smelting areas at Tharsis, Riotinto and Huelva, SW Spain

Trace elements may present an environmental hazard in the vicinity of mining and smelting activities. However, the factors controlling trace element distribution in soils around ancient and modem mining and smelting areas are not always clear. Tharsis, Riotinto and Huelva are located in the Iberian Pyrite Belt in SW Spain. Tharsis and Riotinto mines have been exploited since 2500 B.C., with intensive smelting taking place. Huelva, established in 1970 and using the Flash Furnace Outokumpu process, is currently one of the largest smelter in the world. Pyrite and chalcopyrite ore have been intensively smelted for Cu. However, unusually for smelters and mines of a similar size, the elevated trace element concentrations in soils were found to be restricted to the immediate vicinity of the mines and smelters, being found up to a maximum of 2 kin from the mines and smelters at Tharsis, Riotinto and Huelva. Trace element partitioning (over 2/3 of trace elements found in the residual immobile fraction of soils at Tharsis) and soil particles examination by SEM-EDX showed that trace elements were not adsorbed onto soil particles, but were included within the matrix of large trace element-rich Fe silicate slag particles (i.e. 1 min circle divide at least 1 wt.% As, Cu and Zn, and 2 wt.% Pb). Slag particle large size (I mm 0) was found to control the geographically restricted trace element distribution in soils at Tharsis, Riotinto and Huelva, since large heavy particles could not have been transported long distances. Distribution and partitioning indicated that impacts to the environment as a result of mining and smelting should remain minimal in the region. (c) 2006 Elsevier B.V. All rights reserved.

The water quality of the River Carnon, west Cornwall, November 1992 to March 1994: the impacts of Wheal Jane discharges

In January 1992, there was a major pollutant event for the River Canon and downstream with its confluence to the River Fal and the Fal estuary in the west Cornwall. This incident was associated with the discharge of several million gallons of highly polluted water from the abandoned Wheal Jane tin mine that also extracted Ag, Cu and Zn ore. Later that year, the Centre for Ecology and Hydrology (CBH; then Institute of Hydrology) Wallingford undertook daily monitoring of the River Canon for a range of major, minor and trace elements to assess the nature and the dynamics of the pollutant discharges. These data cover an 18-month period when there remained major water-quality problems after the initial phase of surface water contamination. Here, a summary is provided of the water quality found, as a backdrop to set against subsequent remediation. Two types of water-quality determinant grouping were observed. The first type comprises the determinants B, Cs, Ca, Li, K, Na, SO4, Rb and Sr, and their concentrations are positively correlated with each other but inversely correlated with flow. This type of water-quality determinant shows variations in concentration that broadly link to the normal hydrogeochemical processes within the catchment, with limited confounding issues associated with mine drainage. The second type of water-quality determinant comprises Al, Be, Cd, Ce, Co, Cu, Fe, La, Pb, Pr, Nd, Ni, Si, Sb, U, Y and Zn, and concentrations for all this group are positively correlated. The determinants in this second group all have concentrations that are negatively correlated with pH. This group links primarily to pollutant mine discharge. The water-quality variations in the River Camon are described in relation to these two distinct hydrogeochemical groupings. (C) 2004 Elsevier B.V All rights reserved.

A study of the effect of heat source location in a ventilated room using multiple regression analysis

Multiple regression analysis is a statistical technique which allows to predict a dependent variable from m ore than one independent variable and also to determine influential independent variables. Using experimental data, in this study the multiple regression analysis is applied to predict the room mean velocity and determine the most influencing parameters on the velocity. More than 120 experiments for four different heat source locations were carried out in a test chamber with a high level wall mounted air supply terminal at air change rates 3-6 ach. The influence of the environmental parameters such as supply air momentum, room heat load, Archimedes number and local temperature ratio, were examined by two methods: a simple regression analysis incorporated into scatter matrix plots and multiple stepwise regression analysis. It is concluded that, when a heat source is located along the jet centre line, the supply momentum mainly influences the room mean velocity regardless of the plume strength. However, when the heat source is located outside the jet region, the local temperature ratio (the inverse of the local heat removal effectiveness) is a major influencing parameter.

Nuclear fuel cycles: interfaces with the environment

The waste materials generated in the nuclear fuel cycle are very varied,ranging from the tailings arising from mining and processing uranium ore, depleted uranium in a range of chemical forms, to a range of process wastes of differing activities and properties. Indeed, the wastes generated are intimately linked to the options selected in operating the nuclear fuel cycle, most obviously to the management of spent fuel. An open fuel cycle implies the disposal of highly radioactive spent fuel, whereas a closed fuel cycle generates a complex array of waste streams. On the other hand, a closed fuel cycle offers options for waste management, for example reduction in highly active waste volume, decreased radiotoxicity, and removal of fissile material. Many technological options have been proposed or explored, and each brings its own particular mix of wastes and environmental challenges.

Croig Cave: a late Bronze Age ornament deposition and 3,500 years of coastal foraging in NW Mull, Scotland

Activity within caves provides an important element of the later prehistoric and historic settlement pattern of western Scotland. This contribution reports on a small-scale excavation within Croig Cave, on the coast of north-west Mull, that exposed a 1.95m sequence of midden deposits and cave floors that dated bewteen c 1700 BC and AD 1400. Midden analysis indicated the processing of a .... 950 BC, a penannular copper bracelet a discrete ritual episode within the cycle of otherwise potentially mundane activities. Lead isotope analysis indicates an Irish origin for the copper ore. A piece of iron slag within later midden deposits, dated to c 400 BC, along with high frequencies of wood charcoal, suggest that smithing or smelting may have occurred within the cave. High zinc levels in the historic levels of the midden c AD 1200 might indicate intensive processing of seaweed.

Opening up climate research: A linked data approach to publishing data provenance

Traditionally, the formal scientific output in most fields of natural science has been limited to peer- reviewed academic journal publications, with less attention paid to the chain of intermediate data results and their associated metadata, including provenance. In effect, this has constrained the representation and verification of the data provenance to the confines of the related publications. Detailed knowledge of a dataset’s provenance is essential to establish the pedigree of the data for its effective re-use, and to avoid redundant re-enactment of the experiment or computation involved. It is increasingly important for open-access data to determine their authenticity and quality, especially considering the growing volumes of datasets appearing in the public domain. To address these issues, we present an approach that combines the Digital Object Identifier (DOI) – a widely adopted citation technique – with existing, widely adopted climate science data standards to formally publish detailed provenance of a climate research dataset as an associated scientific workflow. This is integrated with linked-data compliant data re-use standards (e.g. OAI-ORE) to enable a seamless link between a publication and the complete trail of lineage of the corresponding dataset, including the dataset itself.

Effect of inclusion of lactulose and Lactobacillus plantarum on the intestinal environment and performance of piglets at weaning

The prebiotic lactulose, a probiotic strain of Lactobacillus plantarum (L. plantarum) and a synbiotic combination of these two agents were evaluated as growth promoters in 25–39-day old commercial weaning pigs. Ninety-six weaning pigs were allocated into 32 pens, taking initial weight into account, and distributed into four groups as follows: a control diet (CTR), the same diet supplemented daily with L. plantarum (109 CFU/mL sprayed on top; 20 mL/pig) (LPN); 10 g/kg lactulose (LAC) or a combination of both treatments (SYN). At day 14, eight piglets from each group were euthanized and proximal colon digesta was sampled for luminal pH, short-chain fatty acids (SCFA) and lactic acid concentrations. Deoxyribonucleic acid was extracted from colonic digesta and the microbial community was profiled by terminal restriction fragment length polymorphism analysis (T-RFLP) and qPCR. Blood urea nitrogen (BUN) and acute-phase proteins (Pig-MAP) were measured. Lactulose treatment (LAC) improved feed intake (P<0.05), average daily gain (P<0.01), feed:gain ratio (P<0.05) and reduced BUN (P<0.01). Both, LAC and LPN treatment, decreased the Enterobacteriaceae:Lactobacillus spp. ratio in the colonic luminal contents (P<0.05). Moreover LPN treatment promoted a decrease in the percentage of branched fatty acids (P<0.01) suggesting a reduction in proteolytic microbial activity. Microbial profiling of colonic luminal contents by T-RFLP revealed changes in some microbial species. Terminal restriction fragments (TRFs) compatible with Bifidobacterium thermoacidophilum were more frequently detected in experimental diets compared to CTR (P<0.05). Pigs receiving SYN diet demonstrated the combined positive effects of individual LAC and LPN treatment although we were not able to show a specific increase in the probiotic strain with the inclusion of lactulose. Collectively, these data suggest the combination of lactulose and L. plantarum acts as a complementary synbiotic, but not as a synergistic combination.

Lactulose and Lactobacillus plantarum, a potential complementary synbiotic to control postweaning colibacillosis in piglets

The potential of a prebiotic oligosaccharide lactulose, a probiotic strain of Lactobacillus plantarum, or their synbiotic combination to control postweaning colibacillosis in pigs was evaluated using an enterotoxigenic Escherichia coli (ETEC) K88 oral challenge. Seventy-two weanlings were fed four diets: a control diet (CTR), that diet supplemented with L. plantarum (2 × 10(10) CFU · day(-1)) (LPN), that diet supplemented with 10 g · kg(-1) lactulose (LAC), or a combination of the two treatments (SYN). After 7 days, the pigs were orally challenged. Six pigs per treatment were euthanized on days 6 and 10 postchallenge (PC). Inclusion of lactulose improved the average daily gain (ADG) (P < 0.05) and increased lactobacilli (P < 0.05) and the percentage of butyric acid (P < 0.02) in the colon. An increase in the ileum villous height (P < 0.05) and a reduction of the pig major acute-phase protein (Pig-MAP) in serum (P < 0.01) were observed also. The inclusion of the probiotic increased numbers of L. plantarum bacteria in the ileum and colon (P < 0.05) and in the total lactobacilli in the colon and showed a trend to reduce diarrhea (P = 0.09). The concentrations of ammonia in ileal and colonic digesta were decreased (P < 0.05), and the villous height (P < 0.01) and number of ileal goblet cells (P < 0.05) increased, at day 10 PC. A decrease in plasmatic tumor necrosis factor alpha (TNF-α) (P < 0.01) was also seen. The positive effects of the two additives were combined in the SYN treatment, resulting in a complementary synbiotic with potential to be used to control postweaning colibacillosis.