Short tandem repeat profiling provides an international reference standard for human cell lines

Cross-contamination between cell lines is a longstanding and frequent cause of scientific misrepresentation. Estimates from national testing services indicate that up to 36% of cell lines are of a different origin or species to that claimed. To test a standard method of cell line authentication, 253 human cell lines from banks and research institutes worldwide were analyzed by short tandem repeat profiling. The short tandem repeat profile is a simple numerical code that is reproducible between laboratories, is inexpensive, and can provide an international reference standard for every cell line. If DNA profiling of cell lines is accepted and demanded internationally, scientific misrepresentation because of cross-contamination can be largely eliminated.

Understanding complexities in international accounting standard setting: agenda entry and the case of IFRS for SMEs

Earlier accounting works have shown that an understanding of agenda entry is critical to better understanding the accounting standards setting process. Consider Walker and Robinson (1993; 1994) and Ryan (1998); and more generally agenda entrance as theorized in Kingdon (2011). In 2003, the IASB placed on its agenda a project to promulgate a standard for small and medium-sized entities (SMEs). This provides our focus. It seemed to be a departure from the IASB’s constitutional focus on capital market participants. Kingdon’s three-streams model of agenda entry helps to identify some of the complexities related to politics and decision making messiness that resulted in a standard setting project for simplified IFRS, misleadingly titled IFRS for SMEs. Complexities relate to the broader international regulatory context, including the boundaries of the IASB’s standard-setting jurisdiction, the role of board members in changing those boundaries, and such sensitivities over the language that the IASB could not agree on a suitably descriptive title. The paper shows similarities with earlier agenda entrance studies by Walker and Robinson (1994) and Ryan (1998). By drawing on interviewees’ recollections and other material it especially reinforces the part played by the nuanced complexities that influence what emerges as an international accounting standard.

Rhetoric in international standard setting process: constructing accounting reality

The paper seeks to explore in depth the ways in which rhetorical strategies are employed in the international accounting standard setting process. The study proposes that rather than simply detailing new accounting requirements, the texts and drafts of accounting standards are artefacts, i.e. deliberately and carefully crafted products, that construct, persuade and encourage certain beliefs and behaviours. The persuasive and constructive strategies are also employed by the constituents submitting comment letters on the regulatory proposals. Consequently, the international accounting standard setting process is an ‘interactive process of meaning making’ (Fairclough, 1989). The study regards accounting as a social construct based on intersubjectivity (Searle, 1995; Davidson, 1990, 1994) and posits language as a constitutive factor in the process (Saussure, 1916; Peirce, 1931-58). This approach to the use of language and the role of rhetoric as a persuasive tool to convince others to our perception of ‘accounting reality’ is supported by the sociological work of Bourdieu (1990, 1991). Bourdieu has drawn our attention to how language becomes used, controlled, reformed and reconstituted by the social agents for the purposes of establishing their dominance. In our study we explore in particular the joint IASB and FASB proposals and subsequent regulations on the scope of consolidation and relevant disclosures that address issues of off-balance sheet financing, a subject that is very timely and of great topical importance. The analysis has revealed sophisticated rhetorical devices used by both the Boards and by the lobbyists. These reflect Aristotelian ethos, pathos and logos. The research demonstrates that those using accounting standards as well as those reading comment letters on the proposals for new standards should be aware of the normative nature of these documents and the subjectivity inherent in the nature of the text.

Do IMF and World Bank programs induce government crises? an empirical analysis

We examine whether and under what circumstances World Bank and International Monetary Fund (IMF) programs affect the likelihood of major government crises. We find that crises are, on average, more likely as a consequence of World Bank programs. We also find that governments face an increasing risk of entering a crisis when they remain under an IMF or World Bank arrangement once the economy's performance improves. The international financial institution's (IFI) scapegoat function thus seems to lose its value when the need for financial support is less urgent. While the probability of a crisis increases when a government turns to the IFIs, programs inherited by preceding governments do not affect the probability of a crisis. This is in line with two interpretations. First, the conclusion of IFI programs can signal the government's incompetence, and second, governments that inherit programs might be less likely to implement program conditions agreed to by their predecessors.

Non-standard working time: an international and comparative analysis

This paper uses the large-scale Cranet data to explore the extent of non-standard working time (NSWT) across Europe and to highlight the contrasts and similarities between two different varieties of capitalism (coordinated market economies and liberal market economies). We explore variations in the extent of different forms of NSWT (overtime, shift working and weekend working) within these two different forms of capitalism, controlling for firm size, sector and the extent of employee voice. Overall, there was no strong link between the variety of capitalism and the use of overtime and weekend working though shift working showed a clear distinction between the two varieties of capitalism. Usage of NSWT in some service sectors was particularly high under both forms of capitalism and service sector activities had a particularly marked influence on the use of overtime in liberal market economies. Surprisingly, strong employee voice was associated with greater use of NSWT.

Managing non-standard international experience: evidence from a Finnish company

Purpose – This paper extends the increasing debates about the role of international experience through mechanisms other than standard expatriation packages, in particular through the use of short-term assignments. It explores the different forms of short-term assignments (project work, commuter assignments, virtual international working and development assignments) and the different sets of positive and negative implications these can have for the company and the individuals concerned. The integration-differentiation debate is reflected here as elsewhere in IHRM, with the company moving towards greater centralization and control of its use of these assignments. Design/methodology/approach – Since the research is exploratory, we adopted a qualitative approach to get a more in-depth understanding on the realities the corporations and the assignees are facing. The study was implemented through a single case study setting in which the data were collected by interviewing (n=20) line managers, human resource management (HRM) staff and assignees themselves. In addition corporate documentation and other materials were reviewed. Findings – The present case study provides evidence about the characteristics of short-term assignments as well as the on the management of such assignments. The paper identifies various benefits and challenges involved in the use of short-term assignments both from the perspectives of the company and assignees. Furthermore, the findings support the view that a recent increase in the popularity of short-term assignments has not been matched by the development of HRM policies for such assignments. Research limitations/implications – As a single case study, limitations in the generalizability of the findings should be kept in mind. More large-scale research evidence is needed around different forms of international assignments beyond standard expatriation in order to fully capture the realities faced by international HRM specialists Practical implications – The paper identifies many challenges but also benefits of using short-term assignments. The paper reports in-depth findings on HR development needs that organizations face when expanding the use of such assignments. Social implications – The paper identifies many challenges but also benefits of using short-term assignments. The paper reports in-depth findings on HR development needs that organizations face when expanding the use of such assignments. Originality/value – Empirical research on short-term assignments is still very limited. In that way the paper provides much needed in-depth evidence on why such assignments are used, what challenges are involved in the use of such assignments and what kinds of HR-development needs are involved.

A cross-calibration of chlorine isotopic measurements and suitability of seawater as the international reference material

A collection of 24 seawaters from various worldwide locations and differing depth was culled to measure their chlorine isotopic composition (delta(37)Cl). These samples cover all the oceans and large seas: Atlantic, Pacific, Indian and Antarctic oceans, Mediterranean and Red seas. This collection includes nine seawaters from three depth profiles down to 4560 mbsl. The standard deviation (2sigma) of the delta(37)Cl of this collection is +/-0.08 parts per thousand, which is in fact as large as our precision of measurement ( +/- 0.10 parts per thousand). Thus, within error, oceanic waters seem to be an homogeneous reservoir. According to our results, any seawater could be representative of Standard Mean Ocean Chloride (SMOC) and could be used as a reference standard. An extended international cross-calibration over a large range of delta(37)Cl has been completed. For this purpose, geological fluid samples of various chemical compositions and a manufactured CH3Cl gas sample, with delta(37)Cl from about -6 parts per thousand to +6 parts per thousand have been compared. Data were collected by gas source isotope ratio mass spectrometry (IRMS) at the Paris, Reading and Utrecht laboratories and by thermal ionization mass spectrometry (TIMS) at the Leeds laboratory. Comparison of IRMS values over the range -5.3 parts per thousand to +1.4 parts per thousand plots on the Y=X line, showing a very good agreement between the three laboratories. On 11 samples, the trend line between Paris and Reading Universities is: delta(37)Cl(Reading)= (1.007 +/- 0.009)delta(37)Cl(Paris) - (0.040 +/- 0.025), with a correlation coefficient: R-2 = 0.999. TIMS values from Leeds University have been compared to IRMS values from Paris University over the range -3.0 parts per thousand to +6.0 parts per thousand. On six samples, the agreement between these two laboratories, using different techniques is good: delta(37)Cl(Leeds)=(1.052 +/- 0.038)delta(37)Cl(Paris) + (0.058 +/- 0.099), with a correlation coefficient: R-2 = 0.995. The present study completes a previous cross-calibration between the Leeds and Reading laboratories to compare TIMS and IRMS results (Anal. Chem. 72 (2000) 2261). Both studies allow a comparison of IRMS and TIMS techniques between delta(37)Cl values from -4.4 parts per thousand to +6.0 parts per thousand and show a good agreement: delta(37)Cl(TIMS)=(1.039 +/- 0.023)delta(37)Cl(IRMS)+(0.059 +/- 0.056), with a correlation coefficient: R-2 = 0.996. Our study shows that, for fluid samples, if chlorine isotopic compositions are near 0 parts per thousand, their measurements either by IRMS or TIMS will give comparable results within less than +/- 0.10 parts per thousand, while for delta(37)Cl values as far as 10 parts per thousand (either positive or negative) from SMOC, both techniques will agree within less than +/- 0.30 parts per thousand. (C) 2004 Elsevier B.V. All rights reserved.

Folsomia candida (Collembola): A "standard" soil arthropod

Folsomia candida Willem 1902, a member of the order Collembola (colloquially called springtails), is a common and widespread arthropod that occurs in soils throughout the world. The species is parthenogenetic and is easy to maintain in the laboratory on a diet of granulated dry yeast. F. candida has been used as a "standard" test organism for more than 40 years for estimating the effects of pesticides and environmental pollutants on nontarget soil arthropods. However. it has also been employed as a model for the investigation of numerous other phenomena such as cold tolerance, quality as a prey item, and effects of microarthropod grazing on pathogenic fungi and mycorrhizae of plant roots. In this comprehensive review. aspects of the life history, ecology, and ecotoxicology of F candida are covered. We focus on the recent literature, especially studies that have examined the effects of soil pollutants on reproduction in F candida using the protocol published by the International Standards Organization in 1999.

Allelic size standards and reference genotypes to unify international cocoa (Theobroma cacao L.) microsatellite data

Standardisation of microsatellite allele profiles between laboratories is of fundamental importance to the transferability of genetic fingerprint data and the identification of clonal individuals held at multiple sites. Here we describe two methods of standardisation applied to the microsatellite fingerprinting of 429 Theobroma cacao L. trees representing 345 accessions held in the worlds largest Cocoa Intermediate Quarantine facility: the use of a partial allelic ladder through the production of 46 cloned and sequenced allelic standards (AJ748464 to AJ48509), and the use of standard genotypes selected to display a diverse allelic range. Until now a lack of accurate and transferable identification information has impeded efforts to genetically improve the cocoa crop. To address this need, a global initiative to fingerprint all international cocoa germplasm collections using a common set of 15 microsatellite markers is in progress. Data reported here have been deposited with the International Cocoa Germplasm Database and form the basis of a searchable resource for clonal identification. To our knowledge, this is the first quarantine facility to be completely genotyped using microsatellite markers for the purpose of quality control and clonal identification. Implications of the results for retrospective tracking of labelling errors are briefly explored.

Folsomia candida (Collembola): A "standard" soil arthropod

Folsomia candida Willem 1902, a member of the order Collembola (colloquially called springtails), is a common and widespread arthropod that occurs in soils throughout the world. The species is parthenogenetic and is easy to maintain in the laboratory on a diet of granulated dry yeast. F. candida has been used as a "standard" test organism for more than 40 years for estimating the effects of pesticides and environmental pollutants on nontarget soil arthropods. However. it has also been employed as a model for the investigation of numerous other phenomena such as cold tolerance, quality as a prey item, and effects of microarthropod grazing on pathogenic fungi and mycorrhizae of plant roots. In this comprehensive review. aspects of the life history, ecology, and ecotoxicology of F candida are covered. We focus on the recent literature, especially studies that have examined the effects of soil pollutants on reproduction in F candida using the protocol published by the International Standards Organization in 1999.

Standardization of procurement: National or international?

The ISO has issued a Draft International Standard on construction procurement and the British Standards Institute is drafting a standard based upon this for use in the UK. Three questions arise from these observations. First, what kind of consultation processes would be adequate to ensure that such a standard meets the requirements of an industry as diverse as construction? Second, why would an international standard be inappropriate for use in a country like UK? Third, what sort of issues should such a standard seek to cover? There are strong precedents for process standards, such as quality assurance, design management and workmanship on building sites. So the idea of a standard on procurement is not unusual. Moreover, there are many differences in tendering and procurement practice that are wasteful and even collusive or illegal. These issues are explored with a view to offering insights and suggestions for guidance based on the experiences in UK. The research method is first-hand observation of the drafting committee who are dealing with the British Standard. As an example to test and inform the standardization concept, six different standard guidance documents on tendering procedures are compared. This reveals a significant degree of diversity, and based on this, nine stages for implementing a tendering procedure are derived.

Responsiveness to change by standard-form contract drafters: A case study of the FIDIC White Book

Purpose – The purpose of this paper is to focus on the Fédération Internationale des Ingénieurs-Conseils (FIDIC) White Book standard form of building contract. It tracks the changes to this contract over its four editions, and seeks to identify their underlying causes. Design/methodology/approach – The changes made to the White Book are quantified using a specific type of quantitative content analysis. The amended clauses are then examined to understand the nature of the changes made. Findings – The length of the contract increased by 34 per cent between 1990 and 2006. A large proportion of the overall increase can be attributed to the clauses dealing with “conflict of interest/corruption” and “dispute resolution”. In both instances, the FIDIC drafting committees have responded to international developments to discourage corruption, and to encourage the use of alternative dispute resolution. Between 1998 and 2006, the average length of the sentences increased slightly, raising the question of whether long sentences are easily understood by users of contracts. Research limitations/implications – Quantification of text appears to be particularly useful for the analysis of documents which are regularly updated because changes can be clearly identified and the length of sentences can be determined, leading to conclusions about the readability of the text. However, caution is needed because changes of great relevance can be made to contract clauses without actually affecting their length. Practical implications – The paper will be instructive for contract drafters and informative for users of FIDIC's White Book. Originality/value – Quantifying text has been rarely used regarding standard-form contracts in the field of construction.