Leaching of nitrate from cropped rainfed terraces in the mid-hills of Nepal

Intensification of crop production in the mid-hills of Nepal has led to concerns that nitrogen loss by leaching may increase. This study estimated the amount of N leached during two years from rainfed terraces (bari-land) at three locations in Nepal. Maize or upland rice grown in the monsoon season was given either no nutrient inputs or inputs via either nitrogen fertilizer or farmyard manure. Nitrate concentration in soil solution was measured regularly with porous ceramic cup samplers and drainage estimated from a simple soil water balance. Estimated losses of nitrogen by leaching ranged from 0 to 63.5 kg N ha(-1) depending on location and the form of nitrogen applied. Losses from plots receiving no nutrient inputs were generally small (range: 0-35 kg N ha(-1)) and losses from plots where nitrogen was applied as manure (range: 2-41 kg N ha(-1)) were typically half those from plots with nitrogen applied as fertilizer. Losses during the post-monsoon crops of finger millet were small (typically <5% of total loss) although losses from the one site with blackgram were larger (about 13%). The highest concentrations of nitrate in solution were measured early in the season as the monsoon rains began and immediately following fertilizer applications. Leaching losses are likely to be minimised if manure is applied as a basal nutrient dressing followed by fertilizer nitrogen later in the season.

Electrochemical deposition of praseodymium oxide on tin-doped indium oxide as a thin sensing film

Fabrication of a thin praseodymium oxide film is of great technological interest in sensor, semiconducting, and ceramic industries. It is shown for the first time that an ultrathin layer of praseodymium oxide can be deposited on tin-doped indium oxide surface (ITO) by applying a negative sweeping voltage (cathodic electrodeposition) to the aqueous solution containing Pr(NO3)(3) and H2O2 using cyclic voltammetry, followed by annealing the film at 500 S C for 1 h. X-ray diffraction suggested that the predominant phase of the film is Pr6O11 and atomic force microscopy and scanning electron microscopy characterizations indicated that this film is assembled with a monolayer coverage of spherical praseodymium oxide nanoparticles packed closely on the ITO surface. AC impedance measurements of the thin Pr6O11 film on ITO also revealed that the composite material displays a much higher electrical conductivity compared to the pure ITO. As a result, the material could suitably be used as a new chemical sensor. (c) 2006 The Electrochemical Society.

Layer-by-layer deposition of praseodymium oxide on tin-doped indium oxide (ITO) surface

Praseodymium oxide as a thin film of controllable layer is known to display many unique physiochemical properties, which can be useful to ceramic, semiconductive and sensor industries. Here in this short paper, we describe a new chemical method of depositing praseodymium oxide on tin-doped indium oxide (ITO) surface using a layer-by-layer approach. The process is carried out by dipping the ITO in solutions of adsorbable polycationic chitosan and alkaline praseodymium hydroxide Pr(OH)(3) alternatively in order to build up the well-defined multi-layers. XRD suggests that the predominant form of the oxide is Pr6O11, obtained after heat treatment of the deposited ITO in static air at 500 degrees C. Microscopic studies including AFM, TEM and SEM indicate that the deposited oxide particles are uniform in size and shape (cylindrical), mesoporous and the thickness of the film can be controlled. AC impedance measurements of the deposited materials also reveal that the oxide layers display a high electrical conductivity hence suitable for sensor uses. (c) 2006 Elsevier B.V. All rights reserved.

Geoarchaeology and the value of multidisciplinary palaeoenvironmental approaches: a case study from the Tehran Plain, Iran

Tepe Pardis, a significant Neolithic–Chalcolithic site on the Tehran Plain in Iran, is, like many sites in the area, under threat from development. The site contains detailed evidence of (1) the Neolithic–Chalcolithic transition, (2) an Iron Age cemetery and (3) how the inhabitants adapted to an unstable fan environment through resource exploitation (of clay deposits for relatively large-scale ceramic production by c. 5000 BC, and importantly, possible cutting of artificial water channels). Given this significance, models have been produced to better understand settlement distribution and change in the region. However, these models must be tied into a greater understanding of the impact of the geosphere on human development over this period. Forming part of a larger project focusing on the transformation of simple, egalitarian Neolithic communities into more hierarchical Chalcolithic ones, the site has become the focus of a multidisciplinary project to address this issue. Through the combined use of sedimentary and limited pollen analysis, radiocarbon and optically stimulated luminescence dating (the application of the last still rare in Iran), a greater understanding of the impact of alluvial fan development on human settlement through alluviation and the development of river channel sequences is possible. Notably, the findings presented here suggest that artificial irrigation was occurring at the site as early as 6.7±0.4 ka (4300–5100 BC).

Geoarchaeological investigations of midden-formation processes in the early to late Neolithic levels at Catalhoyuk, Turkey ca. 8550-8370 cal BP.

Anthropogenic midden deposits are remarkably well preserved at the Neolithic settlement of atalhöyük and provide significant archaeological information on the types and nature of activities occurring at the site. To decipher their complex stratigraphy and to investigate formation processes, a combination of geoarchaeological techniques was used. Deposits were investigated from the early ceramic to late Neolithic levels, targeting continuous sequences to examine high resolution and broader scale changes in deposition. Thin-section micromorphology combined with targeted phytolith and geochemical analyses indicates they are composed of a diverse range of ashes and other charred and siliceous plant materials, with inputs of decayed plants and organic matter, fecal waste, and sedimentary aggregates, each with diverse depositional pathways. Activities identified include in situ burning, with a range of different fuel types that may be associated with different activities. The complexity and heterogeneity of the midden deposits, and thus the necessity of employing an integrated microstratigraphic approach is demonstrated, as a prerequisite for cultural and palaeoenvironmental reconstructions.

Thermoelectric materials: a new rapid synthesis process for non-toxic and high-performance tetrahedrite compounds

The feasibility to synthesize, in large quantity, pure and non-toxic tetrahedrite compounds using high-energy mechanical-alloying from only elemental precursors is reported in the present paper for the first time. Our processing technique allows a better control of the final product composition and leads to high thermoelectric performances (ZT of 0.75 at 700 K), comparable to that reported on sealed tube synthesis samples. Combined with spark plasma sintering, the production of highly pure and dense samples is achieved in a very short time, at least 8 times shorter than in conventional liquid-solid-vapor synthesis process. The process described in this paper is a promising way to produce high performance tetrahedrite materials for cost-effective and large-scale thermoelectric applications.

Thermoelectric properties of TiS2 mechanically alloyed compounds

Bulk polycrystalline samples in the series Ti1−xNbxS2 (0 ≤ x ≤ 0.075) were prepared using mechanical alloying synthesis and spark plasma sintering. X-ray diffraction analysis coupled with high resolution transmission electron microscopy indicates the formation of trigonal TiS2 by high energy ball-milling. The as-synthesized particles consist of pseudo-ordered TiS2 domains of around 20–50 nm, joined by bent atomic planes. This bottom-up approach leads, after spark plasma sintering, to homogeneous solid solutions, with a niobium solubility limit of x = 0.075. Microstructural observations evidence the formation of small crystallites in the bulk compounds with a high density of stacking faults. The large grain boundary concentration coupled with the presence of planar defects, leads to a substantial decrease in the thermal conductivity to 1.8 W/mK at 700 K. This enables the figure of merit to reach ZT = 0.3 at 700 K for x = 0.05, despite the lower electron mobility in mechanically alloyed samples due to small crystallite/grain size and structural defects.