Design of mucoadhesive polymeric films based on blends of poly(acrylic acid) and (hydroxypropyl)cellulose

Mixing of aqueous solutions of poly(acrylic acid) and (hydroxypropyl) cellulose results in formation of hydrogen-bonded interpolymer complexes, which precipitate and do not allow preparation of homogeneous polymeric films by casting. In the present work the effect of pH on the complexation between poly(acrylic acid) and (hydroxypropyl)cellulose in solutions and miscibility of these polymers in solid state has been studied. The pH-induced complexation-miscibility-immiscibility transitions in the polymer mixtures have been observed. The optimal conditions for preparation of homogeneous polymeric films based on blends of these polymers have been found, and the possibility of radiation cross-linking of these materials has been demonstrated. Although the gamma-radiation treatment of solid polymeric blends was found to be inefficient, successful cross-linking was achieved by addition of N, N'- methylenebis(acrylamide). The mucoadhesive potential of both soluble and cross-linked films toward porcine buccal mucosa is evaluated. Soluble films adhered to mucosal tissues undergo dissolution within 30-110 min depending on the polymer ratio in the blend. Cross-linked films are retained on the mucosal surface for 10-40 min and then detach.

Sparse kernel density estimator using orthogonal regression based on D-optimality experimental design

A novel sparse kernel density estimator is derived based on a regression approach, which selects a very small subset of significant kernels by means of the D-optimality experimental design criterion using an orthogonal forward selection procedure. The weights of the resulting sparse kernel model are calculated using the multiplicative nonnegative quadratic programming algorithm. The proposed method is computationally attractive, in comparison with many existing kernel density estimation algorithms. Our numerical results also show that the proposed method compares favourably with other existing methods, in terms of both test accuracy and model sparsity, for constructing kernel density estimates.

A supramolecular polymer based on tweezer-type pi-pi stacking interactions: molecular design for healability and enhanced toughness

An elastomeric, healable, supramolecular polymer blend comprising a chain-folding polyimide and a telechelic polyurethane with pyrenyl end groups is compatibilized by aromatic pi-pi stacking between the pi-electron-deficient diimide groups and the pi-electron-rich pyrenyl units. This interpolymer interaction is the key to forming a tough, healable, elastomeric material. Variable-temperature FTIR analysis of the bulk material also conclusively demonstrates the presence of hydrogen bonding, which complements the pi-pi stacking interactions. Variable-temperature SAXS analysis shows that the healable polymeric blend has a nanophase-separated morphology and that the X-ray contrast between the two types of domain increases with increasing temperature, a feature that is repeatable over several heating and cooling cycles. A fractured sample of this material reproducibly regains more than 95% of the tensile modulus, 91% of the elongation to break, and 77% of the modulus of toughness of the pristine material.

Determinants of fruit and vegetable intake in England: a re-examination based on quantile regression

Objective To examine die sociodemographic determinants of fruit and vegetable (F&V) consumption in England and determine the differential effects of socioeconomic variables at various parts of the intake distribution, with a special focus on severely inadequate intakes Design Quantile regression, expressing F&V intake as a function of sociodemographic variables, is employed. Here, quantile regression flexibly allows variables such as ethnicity to exert effects on F&V intake that. vary depending oil existing levels of intake. Setting The 2003 Health survey of England. Subjects Data were from 11044 adult individuals. Results The influence of particular sociodemographic variables is found to vary significantly across the intake distribution We conclude that women consume more F&V than men, Asians and Hacks mole dian Whites, co-habiting individuals more than single-living ones Increased incomes and education also boost intake However, the key general finding of the present study is that the influence of most variables is relatively weak in the area of greatest concern, i e among those with the most inadequate intakes in any reference group. Conclusions. Our findings emphasise the importance of allowing the effects of socio-economic drivers to vary across the intake distribution The main finding, that variables which exert significant influence on F&V Intake at other parts Of the conditional distribution have a relatively weak influence at the lower tail, is cause for concern. It implies that in any defined group, those consuming the lease F&V are hard to influence using compaigns or policy levers.

Apparent digestibility and nitrogen utilization of diets based on maize silage harvested at three stages of maturity and fed to steers

Advancing maize crop maturity is associated with changes in ear-to-stover ratio which may have consequences for the digestibility of the ensiled crop. The apparent digestibility and nitrogen retention of three diets (Early, Mid and Late) containing maize silages made from maize of advancing harvest date [dry matter (DM) contents of the maize silages were 273, 314 and 367 g kg(-1) for the silages in the Early, Mid and Late diets respectively], together with a protein supplement offered in sufficient quantities to make the diets isonitrogenous, were measured in six Holstein-Friesian steers in an incomplete Latin square design with four periods. Dry-matter intake of maize silage tended to be least for the Early diet and greatest for the Medium diet (P=0(.)182). Apparent digestibility of DM and organic matter did not differ between diets. Apparent digestibility of energy was lowest in the Late diet (P = 0(.)057) and the metabolizable energy concentrations of the three silages were calculated as 11(.)0, 11(.)1 and 10(.)6 MJ kg(-1) DM for the Early, Medium and Late diets respectively (P = 0(.)068). No differences were detected between diets in starch digestibility but the number of undamaged grains present in the faeces of animals fed the Late diet was significantly higher than with the Early and Mid diets (P = 0(.)006). The apparent digestibility of neutral-detergent fibre of the diets reduced significantly as silage DM content increased (P = 0(.)012) with a similar trend for the apparent digestibility of acid-detergent fibre (P = 0(.)078). Apparent digestibility of nitrogen (N) was similar for the Early and Mid diets, both being greater than the Late diet (P = 0(.)035). Nitrogen retention did not differ between diets. It was concluded that delaying harvest until the DM content is above 300 g kg(-1) can negatively affect the nutritive value of maize silage in the UK.

Apparent digestibility and nitrogen utilisation of diets based on maize and grass silage fed to beef steers

Substituting grass silage with maize silage in forage mixtures may result in one forage influencing the nutritive value of another in terms of whole tract nutrient digestibility and N utilisation. This experiment investigated effects of four forage combinations being, grass silage (G); 67 g/100 g grass silage + 33 g/100 g maize silage (GGM); 67 g/100 g maize silage + 33 g/100 g grass silage (MMG); maize silage (M). All diets were formulated to be isonitrogenous (22.4 g N/kg dry matter [DM]) using a concentrate mixture. Ration digestibility and N balance was determined using 7 Holstein Friesian steers (mean body weight 411.0 +/- 120.9 kg) in a cross-over design. Inclusion of maize silage in the diet had a positive linear effect on forage and total DM intake (P = 0.001), and on apparent DM and organic matter digestibility (both P = 0.048). Regardless of the silage ratio used, the metabolisable energy concentration of maize silage was calculated to be higher than that of grass silage (P = 0.058), and linearly related to the relative proportions of the two silages in the forage mixture. Inclusion of maize silage in the diet resulted in a linear decline in the apparent digestibility of starch (P = 0.022), neutral detergent fibre (P < 0.001) and acid detergent fibre (P = 0.003). Nitrogen retention, expressed as amount retained per day or in terms of body weight (g/100 kg) increased linearly with maize inclusion (P = 0.047 and 0.046, respectively). Replacing grass silage with maize silage caused linear responses according to the proportions of each forage in the diet, and that there were no associative effects of combining forages. (C) 2004 Elsevier B.V. All rights reserved.

An evaluation of a Bayesian method of dose escalation based on bivariate binary responses

Recently, various approaches have been suggested for dose escalation studies based on observations of both undesirable events and evidence of therapeutic benefit. This article concerns a Bayesian approach to dose escalation that requires the user to make numerous design decisions relating to the number of doses to make available, the choice of the prior distribution, the imposition of safety constraints and stopping rules, and the criteria by which the design is to be optimized. Results are presented of a substantial simulation study conducted to investigate the influence of some of these factors on the safety and the accuracy of the procedure with a view toward providing general guidance for investigators conducting such studies. The Bayesian procedures evaluated use logistic regression to model the two responses, which are both assumed to be binary. The simulation study is based on features of a recently completed study of a compound with potential benefit to patients suffering from inflammatory diseases of the lung.

Low-molecular-weight gelators: Elucidating the principles of gelation based on gelator solubility and a cooperative self-assembly model

This paper highlights the key role played by solubility in influencing gelation and demonstrates that many facets of the gelation process depend on this vital parameter. In particular, we relate thermal stability (T-gel) and minimum gelation concentration (MGC) values of small-molecule gelation in terms of the solubility and cooperative self-assembly of gelator building blocks. By employing a van't Hoff analysis of solubility data, determined from simple NMR measurements, we are able to generate T-calc values that reflect the calculated temperature for complete solubilization of the networked gelator. The concentration dependence of T-calc allows the previously difficult to rationalize "plateau-region" thermal stability values to be elucidated in terms of gelator molecular design. This is demonstrated for a family of four gelators with lysine units attached to each end of an aliphatic diamine, with different peripheral groups (Z or Bee) in different locations on the periphery of the molecule. By tuning the peripheral protecting groups of the gelators, the solubility of the system is modified, which in turn controls the saturation point of the system and hence controls the concentration at which network formation takes place. We report that the critical concentration (C-crit) of gelator incorporated into the solid-phase sample-spanning network within the gel is invariant of gelator structural design. However, because some systems have higher solubilities, they are less effective gelators and require the application of higher total concentrations to achieve gelation, hence shedding light on the role of the MGC parameter in gelation. Furthermore, gelator structural design also modulates the level of cooperative self-assembly through solubility effects, as determined by applying a cooperative binding model to NMR data. Finally, the effect of gelator chemical design on the spatial organization of the networked gelator was probed by small-angle neutron and X-ray scattering (SANS/SAXS) on the native gel, and a tentative self-assembly model was proposed.

Sparse kernel density estimation technique based on zero-norm constraint

A sparse kernel density estimator is derived based on the zero-norm constraint, in which the zero-norm of the kernel weights is incorporated to enhance model sparsity. The classical Parzen window estimate is adopted as the desired response for density estimation, and an approximate function of the zero-norm is used for achieving mathemtical tractability and algorithmic efficiency. Under the mild condition of the positive definite design matrix, the kernel weights of the proposed density estimator based on the zero-norm approximation can be obtained using the multiplicative nonnegative quadratic programming algorithm. Using the -optimality based selection algorithm as the preprocessing to select a small significant subset design matrix, the proposed zero-norm based approach offers an effective means for constructing very sparse kernel density estimates with excellent generalisation performance.

Phylogenetic systematics of Sternbergia (Amaryllidaceae) based on plastid and ITS sequence data

The phylogenetics of Sternbergia (Amaryllidaceae) were studied using DNA sequences of the plastid ndhF and matK genes and nuclear internal transcribed spacer (ITS) ribosomal region for 38, 37 and 32 ingroup and outgroup accessions, respectively. All members of Sternbergia were represented by at least one accession, except S. minoica and S. schubertii, with additional taxa from Narcissus and Pancratium serving as principal outgroups. Sternbergia was resolved and supported as sister to Narcissus and composed of two primary subclades: S. colchiciflora sister to S. vernalis, S. candida and S. clusiana, with this clade in turn sister to S. lutea and its allies in both Bayesian and bootstrap analyses. A clear relationship between the two vernal flowering members of the genus was recovered, supporting the hypothesis of a single origin of vernal flowering in Sternbergia. However, in the S. lutea complex, the DNA markers examined did not offer sufficient resolving power to separate taxa, providing some support for the idea that S. sicula and S. greuteriana are conspecific with S. lutea

A typology of internet users based on comparative affective states: evidence from eight countries

Purpose - The role of affective states in consumer behaviour is well established. However, no study to date has empirically examined online affective states as a basis for constructing typologies of internet users and for assessing the invariance of clusters across national cultures. Design/methodology/approach - Four focus groups with internet users were carried out to adapt a set of affective states identified from the literature to the online environment. An online survey was then designed to collect data from internet users in four Western and four East Asian countries. Findings - Based on a cluster analysis, six cross-national market segments are identified and labelled "Positive Online Affectivists", "Offline Affectivists", "On/Off-line Negative Affectivists", "Online Affectivists", "Indistinguishable Affectivists", and "Negative Offline Affectivists". The resulting clusters discriminate on the basis of national culture, gender, working status and perceptions towards online brands. Practical implications - Marketers may use this typology to segment internet users in order to predict their perceptions towards online brands. Also, a standardised approach to e-marketing is not recommended on the basis of affective state-based segmentation. Originality/value - This is the first study proposing affective state-based typologies of internet users using comparable samples from four Western and four East Asian countries.

Provenance of marbles from Naxos based on microstructural and geochemical characterization

A detailed quantitative microstructural study coupled with cathodoluminescence and geochemical analyses on marbles from Naxos demonstrates that the analysis of microstructures is the most sensitive method to define the origin of marbles within, and between, different regions. Microstructure examination can only be used as an accurate provenance tool if a correction for the second-phase content is considered. If second phases are not considered, a large spread of different microstructures occurs within sample sites, making a separation between neighbouring outcrops difficult or impossible. Moreover, this study shows that the origin of a marble is defined more precisely if the microstructural observations are coupled with cathodoluminescence data.