Composition and cure temperature: The influence on properties of final flexible PU cold cure foam parts

Foams are cellular structures, produced by gas bubbles formed during the polyurethane polymerization mixture. Flexible PU foams meet the following two criteria: have a limited resistance to an applied load, being both permeable to air and reversibly deformable. There are two main types of flexible foams, hot and cold cure foams differing in composition and processing temperatures. The hot cure foams are widely applied and represent the main composition of actual foams, while cold cure foams present several processing and property advantages, e.g, faster demoulding time, better humid aging properties and more versatility, as hardness variation with index changes are greater than with hot cure foams. The processing of cold cure foams also is attractive due to the low energy consumption (mould temperature from 30 degrees to 65 degrees C) comparatively to hot cure foams (mould temperature from 30 degrees to 250 degrees C). Another advantage is the high variety of soft materials for low temperature processing moulds. Cold cure foams are diphenylmethane diisocyanate (MDI) based while hot cure foams are toluene diisocyanate (TDI) based. This study is concerned with Viscoelastic flexible foams MDI based for medical applications. Differential Scanning Calorimetry (DSC) was used to characterize the cure kinetics and Dynamical Mechanical Analisys to collect mechanical data. The data obtained from these two experimental procedures were analyzed and associated to establish processing/properties/operation conditions relationships. These maps for the selection of optimized processing/properties/operation conditions are important to achieve better final part properties at lower costs and lead times.

Performance evaluation of wall mounted convector for pre-heating naturally ventilated spaces

This paper presents the results of performance monitoring under real winter weather conditions, controlled laboratory testing and computational fluid dynamics (CFD) analysis of a wall mounted ventilation air inlet heat convector. For real winter weather monitoring, the wall-mounted convector was installed in a laboratory room of the Engineering Building of the School of Construction Management and Engineering. Air and hot water temperatures and air speeds were measured at the entrance to the convector and in the room. The hot water temperature was controlled at 40, 60 and 80 °C. The monitoring results were later used as boundary conditions for a CFD simulation to investigate the air movement in the room. Controlled laboratory testing was conducted in laboratories at the University of Reading, UK and at Wetterstad Consultancy, Sweden. The results of the performance investigation showed that the system contributed greatly to the room heating, particularly at a water temperature of 80 °C. Also adequate fresh air was supplied to the room. Such a system is able to provide an energy efficient method of eliminating problems associated with cold winter draughts.

Induction of cold active acid phosphomonoesterase activity at low temperature in psychrotrophic ectomycorrhizal Hebeloma spp.

Hebeloma strains of arctic and temperature origin, grown at 22° or 6°, were assayed for wall-bound and extracellular acid phosphomonoesterase (pNPPase) across a temperature range 2-37°. Only when grown at 6° was a cold active extracellular pNPPase induced in all the arctic strains and most of the temperature strains tested. Such enzymes are suggested to be a adaptation to low soil temperatures, and are discussed in the context of ectomycorrhizal access to soil PO4− monoesters at low temperature.

The Cold War and its aftermath in the Americas: the search for a synthetic interpretation of U.S. policy

More than two decades have passed since the fall of the Berlin Wall and the transfer of the Cold War file from a daily preoccupation of policy makers to a more detached assessment by historians. Scholars of U.S.-Latin American relations are beginning to take advantage both of the distance in time and of newly opened archives to reflect on the four decades that, from the 1940s to the 1980s, divided the Americas, as they did much of the world. Others are seeking to understand U.S. policy and inter-American relations in the post-Cold War era, a period that not only lacks a clear definition but also still has no name. Still others have turned their gaze forward to offer policies in regard to the region for the new Obama administration. Numerous books and review essays have addressed these three subjects—the Cold War, the post-Cold War era, and current and future issues on the inter-American agenda. Few of these studies attempt, however, to connect the three subjects or to offer new and comprehensive theories to explain the course of U.S. policies from the beginning of the twentieth century until the present. Indeed, some works and policy makers continue to use the mind-sets of the Cold War as though that conflict were still being fought. With the benefit of newly opened archives, some scholars have nevertheless drawn insights from the depths of the Cold War that improve our understanding of U.S. policies and inter-American relations, but they do not address the question as to whether the United States has escaped the longer cycle of intervention followed by neglect that has characterized its relations with Latin America. Another question is whether U.S. policies differ markedly before, during, and after the Cold War. In what follows, we ask whether the books reviewed here provide any insights in this regard and whether they offer a compass for the future of inter-American relations. We also offer our own thoughts as to how their various perspectives could be synthesized to address these questions more comprehensively.