Measuring toughness and the cohesive stress-displacement relationship by the essential work of fracture concept

The complete fracture behaviour of ductile double edge notched tension (DENT) specimen is analysed with an approximate model, which is then used to discuss the essential work of fracture (EWF) concept. The model results are compared with the experimental results for an aluminium alloy 6082-O. The restrictions on the ligament size for valid application of the EWF method are discussed with the aid of the model. The model is used to suggest an improved method of obtaining the cohesive stress-displacement relationship for the fracture process zone (FPZ).

An experimental comparison between rival theories of rapid automatized naming performance and its relationship to reading

Two studies investigated the degree to which the relationship between rapid automatized naming (RAN) performance and reading development is driven by shared phonological processes. Study 1 assessed RAN, phonological awareness, and reading performance in 1010 7- to -10 year-olds. Results showed that RAN deficits occurred in the absence of phonological awareness deficits. These were accompanied by modest reading delays. In structural equation modeling, solutions where RAN was subsumed within a phonological processing factor did not provide a good fit to the data, suggesting that processes outside phonology may drive RAN performance and its association with reading. Study 2 investigated Kail’s proposal that speed of processing underlies this relationship. Children with single RAN deficits showed slower speed of processing than did closely matched controls performing normally on RAN. However, regression analysis revealed that RAN made a unique contribution to reading even after accounting for processing speed. Theoretical implications are discussed.

Scripture, style and persuasion in seventeenth-century English theories of preaching

The distinction between a Puritan ‘plain’ and a Laudian ‘metaphysical’ preaching style rests on secular rhetorical theories of persuasion that are relatively unimportant to early Stuart homiletics but are central to later Latitudinarian polemics on preaching. Instead, the ‘English Reformed’ theory and method of sermon composition rests on the didactic function of preaching and the need for the Holy Spirit and hearers to co-operate with the preacher. Although Andrewes and some avant-garde conformists questioned this theory, they developed no alternative method of composition. Arguments made in the 1650s for direct inspiration by the Spirit contributed to the decline of both theory and method

'Response and Responsibility: Theories of the Implied Reader in Children's Literature Criticism'

Reader Response Theory remains popular within Children's Literature Criticism. It seems to offer a sensible resolution to the question of whether meaning derives from text or reader. Through a close reading of one example of this criticism, I suggest that its dualisms are constantly collapsing into appeals to singular authority. at various stages the text or the reader is wholly responsible for meaning. I further suggest that the criticism bypasses the question of interpretation through claiming knowledge of a child reader whose opinions and reactions can be unproblematically accessed. We do not have to worry about reading texts, because we can, apparently, know the child's response to them with certainty. Anything other than this claim to certainty is taken to be a failure of responsibility, a wallowing in the subjective, obscure and perverse. My intention is to reinstate reading as the responsibility of criticism.

An experimental comparison between rival theories of rapid automatized naming performance and its relationship to reading

Two studies investigated the degree to which the relationship between Rapid Automatized Naming (RAN) performance and reading development is driven by shared phonological processes. Study 1 assessed RAN, phonological awareness and reading performance in 1010 children aged 7-10 years. Results showed that RAN deficits occurred in the absence of phonological awareness deficits. These were accompanied by modest reading delays. In structural equation modeling, solutions where RAN was subsumed within a phonological processing factor did not provide a good fit to the data, suggesting that processes outside phonology may drive RAN performance and its association with reading. Study 2 investigated Kail's (1991) proposal that speed of processing underlies this relationship. Children with single RAN deficits showed slower speed of processing than closely matched controls performing normally on RAN. However, regression analysis revealed that RAN made a unique contribution to reading even after accounting for processing speed. Theoretical implications are discussed.

Writers' rooms: theories of contemporary authorship in portraits of creative spaces

This article analyzes two series of photographs and essays on writers’ rooms published in England and Canada in 2007 and 2008. The Guardian’s Writers Rooms series, with photographs by Eamon McCabe, ran in 2007. In the summer of 2008, The Vancouver International Writers and Readers Festival began to post its own version of The Guardian column on its website by displaying, each week leading up to the Festival in September, a different writer’s “writing space” and an accompanying paragraph. I argue that these images of writers’ rooms, which suggest a cultural fascination with authors’ private compositional practices and materials, reveal a great deal about theoretical constructions of authorship implicit in contemporary literary culture. Far from possessing the museum quality of dead authors’ spaces, rooms that are still being used, incorporating new forms of writing technology, and having drafts of manuscripts scattered around them, can offer insight into such well-worn and ineffable areas of speculation as inspiration, singular authorial genius, and literary productivity.

Rooting theories of plant community ecology in microbial interactions

Predominant frameworks for understanding plant ecology have an aboveground bias that neglects soil micro-organisms. This is inconsistent with recent work illustrating the importance of soil microbes in terrestrial ecology. Microbial effects have been incorporated into plant community dynamics using ideas of niche modification and plant–soil community feedbacks. Here, we expand and integrate qualitative conceptual models of plant niche and feedback to explore implications of microbial interactions for understanding plant community ecology. At the same time we review the empirical evidence for these processes. We also consider common mycorrhizal networks, and propose that these are best interpreted within the feedback framework. Finally, we apply our integrated model of niche and feedback to understanding plant coexistence, monodominance and invasion ecology.

Toughness & cutting: A new way of determining ductile fracture toughness and strength

A review is given of the mechanics of cutting, ranging from the slicing of thin floppy offcuts (where there is negligible elasticity and no permanent deformation of the offcut) to the machining of ductile metals (where there is severe permanent distortion of the offcut/chip). Materials scientists employ the former conditions to determine the fracture toughness of ‘soft’ solids such as biological materials and foodstuffs. In contrast, traditional analyses of metalcutting are based on plasticity and friction only, and do not incorporate toughness. The machining theories are inadequate in a number of ways but a recent paper has shown that when ductile work of fracture is included many, if not all, of the shortcomings are removed. Support for the new analysis is given by examination of FEM simulations of metalcutting which reveal that a ‘separation criterion’ has to be employed at the tool tip. Some consideration shows that the separation criteria are versions of void-initiation-growth-and-coalescence models employed in ductile fracture mechanics. The new analysis shows that cutting forces for ductile materials depend upon the fracture toughness as well as plasticity and friction, and reveals a simple way of determining both toughness and flow stress from cutting experiments. Examples are given for a wide range of materials including metals, polymers and wood, and comparison is made with the same properties independently determined using conventional testpieces. Because cutting can be steady state, a new way is presented for simultaneously measuring toughness and flow stress at controlled speeds and strain rates.

Fracture incidence in relation to the pattern of use of hormone therapy in postmenopausal women

Context: Evidence is limited on the effects of different patterns of use of postmenopausal hormone therapy on fracture incidence and particularly on the effects of ceasing use. Objective: To investigate the effect of different patterns of hormone therapy use on fracture incidence. Design, Setting, and Participants: Prospective study of 138737 postmenopausal women aged 50 to 69 years recruited from the UK general population in 19961998 (the Million Women Study) and followed up for 1.9 to 3.9 years (average, 2.8 years) for fracture incidence. Main Outcome Measure: Adjusted relative risk (RR) for incident fracture (except fracture of the fingers, toes, and ribs) in hormone therapy users compared with never users at baseline. Results: A total of 5197 women (3.7%) reported 1 or more fractures, 79% resulting from falls. Current users of hormone therapy at baseline had a significantly reduced incidence of fracture (RR, 0.62; 95% confidence interval [CI], 0.58-0.66; P<.001). This protection was evident soon after hormone therapy began, and the RR decreased with increasing duration of use (P=.001). Among current users at baseline the RR of fracture did not vary significantly according to whether estrogen-only, estrogen-progestin, or other types of hormones were used (RR [95% CI], 0.64 [0.58-0.71], 0.58 [0.53-0.64], and 0.67 [0.56-0.80], respectively; P=19), nor did it vary significantly according to estrogen dose or estrogen or progestin constituents. The RR associated with current use of hormone therapy did not vary significantly according to 11 personal characteristics of study participants, including their age at menopause, body mass index, and physical activity. Past users of hormone therapy at baseline experienced no significant protection against fractures (RR, 1.07; 95% CI, 0.99-1.15); incidence rates returned to those of never-users within about a year of ceasing use. Conclusions: All types of hormone therapy studied confer substantial protection against fracture while they are used. This protection appears rapidly after use commences and wears off rapidly after use ceases. The older women are, the greater is their absolute reduction in fracture incidence while using hormone therapy.

Mode I fracture of sheet metal

The perceived wisdom about thin sheet fracture is that (i) the crack propagates under mixed mode I & III giving rise to a slant through-thickness fracture profile and (ii) the fracture toughness remains constant at low thickness and eventually decreases with increasing thickness. In the present study, fracture tests performed on thin DENT plates of various thicknesses made of stainless steel, mild steel, 6082-O and NS4 aluminium alloys, brass, bronze, lead, and zinc systematically exhibit (i) mode I “bath-tub”, i.e. “cup & cup”, fracture profiles with limited shear lips and significant localized necking (more than 50% thickness reduction), (ii) a fracture toughness that linearly increases with increasing thickness (in the range of 0.5–5 mm). The different contributions to the work expended during fracture of these materials are separated based on dimensional considerations. The paper emphasises the two parts of the work spent in the fracture process zone: the necking work and the “fracture” work. Experiments show that, as expected, the work of necking per unit area linearly increases with thickness. For a typical thickness of 1 mm, both fracture and necking contributions have the same order of magnitude in most of the metals investigated. A model is developed in order to independently evaluate the work of necking, which successfully predicts the experimental values. Furthermore, it enables the fracture energy to be derived from tests performed with only one specimen thickness. In a second modelling step, the work of fracture is computed using an enhanced void growth model valid in the quasi plane stress regime. The fracture energy varies linearly with the yield stress and void spacing and is a strong function of the hardening exponent and initial void volume fraction. The coupling of the two models allows the relative contributions of necking versus fracture to be quantified with respect to (i) the two length scales involved in this problem, i.e. the void spacing and the plate thickness, and (ii) the flow properties of the material. Each term can dominate depending on the properties of the material which explains the different behaviours reported in the literature about thin plate fracture toughness and its dependence with thickness.