How many facets are needed to represent the surface energy balance of an urban area?

We investigate the question of how many facets are needed to represent the energy balance of an urban area by developing simplified 3-, 2- and 1-facet versions of a 4-facet energy balance model of two-dimensional streets and buildings. The 3-facet model simplifies the 4-facet model by averaging over the canyon orientation, which results in similar net shortwave and longwave balances for both wall facets, but maintains the asymmetry in the heat fluxes within the street canyon. For the 2-facet model, on the assumption that the wall and road temperatures are equal, the road and wall facets can be combined mathematically into a single street-canyon facet with effective values of the heat transfer coefficient, albedo, emissivity and thermodynamic properties, without further approximation. The 1-facet model requires the additional assumption that the roof temperature is also equal to the road and wall temperatures. Idealised simulations show that the geometry and material properties of the walls and road lead to a large heat capacity of the combined street canyon, whereas the roof behaves like a flat surface with low heat capacity. This means that the magnitude of the diurnal temperature variation of the street-canyon facets are broadly similar and much smaller than the diurnal temperature variation of the roof facets. Consequently, the approximation that the street-canyon facets have similar temperatures is sound, and the road and walls can be combined into a single facet. The roof behaves very differently and a separate roof facet is required. Consequently, the 2-facet model performs similarly to the 4-facet model, while the 1-facet model does not. The models are compared with previously published observations collected in Mexico City. Although the 3- and 2-facet models perform better than the 1-facet model, the present models are unable to represent the phase of the sensible heat flux. This result is consistent with previous model comparisons, and we argue that this feature of the data cannot be produced by a single column model. We conclude that a 2-facet model is necessary, and for numerical weather prediction sufficient, to model an urban surface, and that this conclusion is robust and therefore applicable to more general geometries.

The political economy of bovine tuberculosis in Great Britain

A brief history of bovine tuberculosis (bTB) and its control in Great Britain is presented. Numerous diverse policies to control the disease in man, cattle and wildlife have been pursued over the last 100 years and many millions of pounds have been spent. After notable success in reducing the incidence and prevalence of bTB in cattle in GB from the 1950s to the mid-1980s, the number of cattle slaughtered has increased with increased geographical spread continually since that time with a high point of bTB incidence in 2008. This increase appeared to coincide with changing policy regarding the control of the disease in badgers with a more humane approach adopted and with strengthened protection for badgers through legislation. Indeed, much controversy has been involved in the debate on the role of badgers in disease transmission to cattle and the need for their control as vectors of the disease with various commissioned research projects, trials, public consultations and media attention. The findings of two social science investigations presented as examples showed that citizens generally believed that bTB in cattle is an important issue that needs to be tackled but objected to badgers being killed, whilst cattle farmers were willing to pay around £17/animal/year for a bTB cattle vaccine. It is noted that successes regarding the control of bTB in other countries have combined both cattle and wildlife controls and had strong involvement from industry working with government.

Water management in Minoan Crete, Greece: the two cisterns of one Middle Bronze Age settlement

The two earliest structures of Minoan Crete that may be considered as large cisterns were both built in the first half of the second millennium BC (the time of the first Minoan palaces) at Myrtos-Pyrgos (lerapetra). A considerable feat of engineering and social management, they remain a most unusual attribute of a Minoan settlement, all the more so since the Myrtos river is/was available to supply water at the foot of the hill of Pyrgos. This paper presents these cisterns, briefly, in terms of geology and technology, the history of their use and re-use, and their relevance to understanding the culture and society (at local and regional levels) of Crete in the time of the Old Palaces, as well as their possible contribution to the political and military history of the period. I then review possible precursors of, and architectural parallels to, the Pyrgos cisterns at Knossos, Malia and Phaistos (none of which has been proved to be a cistern), and the later history of cisterns in Bronze Age Crete. Since only three others are known (at Archanes, Zakro and Tylissos, of Late Bronze Age date), the two cisterns of Myrtos-Pyrgos are an important addition to our still rudimentary knowledge of how the Bronze Age Cretans managed their water supplies.

Silchester Roman Town Insula IX: the development of an urban property c. AD 40-50 - c. AD 250

The development of an urban property in the Roman town of Calleva Atrebatum (Silchester, Hampshire, England) is traced from the late 1st to the mid-3rd century AD. Three successive periods of building with their associated finds of artefacts and biological remains are described and interpreted with provisional reconstructions of the buildings. Links are provided to a copy of the Integrated Archaeological Database (IADB), archived by the Archaeology Data Service, which holds the primary excavation and finds records.

Chemical composition and fermentation characteristics of grain and different parts of the stover from maize land races harvested at different growing periods in two zones of central Mexico

The objective of this work was to determine the rumen fermentation characteristics of maize land races used as forage in central Mexico. In vitro gas production (ml per 200 mg dry matter (DM)) incubations were carried out, and cumulative gas volumes were fitted to the Krishnamoorthy et al. (1991) model. The trial used a split-plot design with cultivation practices associated with maize colour (COL) as the main plot with three levels: white, yellow and black maize; growing periods (PER) were the split plots where PER1, PER2 and PER3 represented the first, second and third periods, respectively and two contrasting zones (Z1 = valley and Z2 = mountain) were used as blocking factors. The principal effects observed were associated with the maturity of the plants and potential gas production increased (P < 0.05) in stems (PER 1 = 51.8, PER2 = 56.3, PER3 = 58.4 ml per 200 mg DM) and in whole plant (PER 1 = 60.9, PER2 = 60.8, PER3= 70.9 ml per 200 mg DM). An inverse effect was observed with fermentation rates in leaves (P < 0.01) with 0.061, 0.053 and 0.0509 (per h) and in whole plant (P < 0.05) with 0.068, 0.057, 0.050 (per h) in PER1, PER2 and PER3 respectively. The digestibility of the neutral-detergent fibre (NDF) decreased with maturity especially in leaves (P < 0.05) with values of 0.71, 0.67 and 0.66 g/kg; in rachis (P < 0.01) 0.75, 0.72, and 0.65 in PER1, PER2 and PER3 respectively. The NDF content in leaves in leaves (668, 705 and 713 g/kg DM for PER1, PER2 and PER3, respectively), stems (580, 594 and 644 g/kg DM) and, husk (663, 774 and, 808 g/kg DM) increased (P < 0.05) with increasing plant maturity, rachis were significantly different between periods (P < 0.01). The structure with-the best nutritive characteristics was the husk, because it had the lowest fibre contents, especially in acid-detergent lignin, with values of 22.6, 28.6 and 37.6 g/kg DM in PER1, PER2 and PER3, respectively.

Typification of farming systems for constructing representative farm models: two illustrations of the application of multi-variate analyses in Chile and Pakistan

If the fundamental precepts of Farming Systems Research were to be taken literally then it would imply that for each farm 'unique' solutions should be sought. This is an unrealistic expectation, but it has led to the idea of a recommendation domain, implying creating a taxonomy of farms, in order to increase the general applicability of recommendations. Mathematical programming models are an established means of generating recommended solutions, but for such models to be effective they have to be constructed for 'truly' typical or representative situations. The multi-variate statistical techniques provide a means of creating the required typologies, particularly when an exhaustive database is available. This paper illustrates the application of this methodology in two different studies that shared the common purpose of identifying types of farming systems in their respective study areas. The issues related with the use of factor and cluster analyses for farm typification prior to building representative mathematical programming models for Chile and Pakistan are highlighted. (C) 2003 Elsevier Science Ltd. All rights reserved.