Why Bt cotton pays for small-scale producers in South Africa

There is much debate about the potential benefits (and costs) of genetically modified (GM) crop technology for developing countries. Studies have been carried out in Argentina, China, Indonesia and most recently India1 to assess the impact of Bacillus thuringiensis (Bt) cotton on farmers in those regions.

Bt-cotton boosts the gross margin of small-scale cotton producers in South Africa

This paper explores some of the issues involved in the Genetic Modification (GM) debate by focusing on one crop that has been modified for pest resistance, cotton (Gossypium hirsutum), and commercially released to small-scale farmers in the Makhathini Flats, KwaZulu Natal, the Republic of South Africa. This was the first commercial release of a GM variety (Bt-cotton) in Sub-Saharan Africa, and thus provides valuable and timely insights into some of the potential advantages and disadvantages of the technology for small-scale farmers in Africa. Even though there are wider concerns regarding the vulnerability of small-scale farmers in the area, the survey results suggest that Bt-cotton generated higher yields and gross margins than non-Bt-cotton. In addition, Bt-cotton significantly reduced the use of pesticide with consequent potential benefits to human health and the environment.

The spacing of orographic rainbands triggered by small-scale topography

A combination of idealized numerical simulations and analytical theory is used to investigate the spacing between convective orographic rainbands over the Coastal Range of western Oregon. The simulations, which are idealized from an observed banded precipitation event over the Coastal Range, indicate that the atmospheric response to conditionally unstable flow over the mountain ridge depends strongly on the subridge-scale topographic forcing on the windward side of the ridge. When this small-scale terrain contains only a single scale (l) of terrain variability, the band spacing is identical to l, but when a spectrum of terrain scales are simultaneously present, the band spacing ranges between 5 and 10 km, a value that is consistent with observations. Based on the simulations, an inviscid linear model is developed to provide a physical basis for understanding the scale selection of the rainbands. This analytical model, which captures the transition from lee waves upstream of the orographic cloud to moist convection within it, reveals that the spacing of orographic rainbands depends on both the projection of lee-wave energy onto the unstable cap cloud and the growth rate of unstable perturbations within the cloud. The linear model is used in tandem with numerical simulations to determine the sensitivity of the band spacing to a number of environmental and terrain-related parameters.

The triggering of orographic rainbands by small-scale topography

The triggering of convective orographic rainbands by small-scale topographic features is investigated through observations of a banded precipitation event over the Oregon Coastal Range and simulations using a cloud-resolving numerical model. A quasi-idealized simulation of the observed event reproduces the bands in the radar observations, indicating the model’s ability to capture the physics of the band-formation process. Additional idealized simulations reinforce that the bands are triggered by lee waves past small-scale topographic obstacles just upstream of the nominal leading edge of the orographic cloud. Whether a topographic obstacle in this region is able to trigger a strong rainband depends on the phase of its lee wave at cloud entry. Convective growth only occurs downstream of obstacles that give rise to lee-wave-induced displacements that create positive vertical velocity anomalies w_c and nearly zero buoyancy anomalies b_c as air parcels undergo saturation. This relationship is quantified through a simple analytic condition involving w_c, b_c, and the static stability N_m^2 of the cloud mass. Once convection is triggered, horizontal buoyancy gradients in the cross-flow direction generate circulations that align the bands parallel to the flow direction.

A multispacecraft analysis of a small-scale transient entrained by solar wind streams

The images taken by the Heliospheric Imagers (HIs), part of the SECCHI imaging package onboard the pair of STEREO spacecraft, provide information on the radial and latitudinal evolution of the plasma compressed inside corotating interaction regions (CIRs). A plasma density wave imaged by the HI instrument onboard STEREO-B was found to propagate towards STEREO-A, enabling a comparison between simultaneous remotesensing and in situ observations of its structure to be performed. In situ measurements made by STEREO-A show that the plasma density wave is associated with the passage of a CIR. The magnetic field compressed after the CIR stream interface (SI) is found to have a planar distribution. Minimum variance analysis of the magnetic field vectors shows that the SI is inclined at 54° to the orbital plane of the STEREO-A spacecraft. This inclination of the CIR SI is comparable to the inclination of the associated plasma density wave observed by HI. A small-scale magnetic cloud with a flux rope topology and radial extent of 0.08 AU is also embedded prior to the SI. The pitch-angle distribution of suprathermal electrons measured by the STEREO-A SWEA instrument shows that an open magnetic field topology in the cloud replaced the heliospheric current sheet locally. These observations confirm that HI observes CIRs in difference images when a small-scale transient is caught up in the compression region.

Abatement of mercury pollution in the small-scale gold mining industry: Restructuring the policy and research agendas

This paper critiques contemporary research and policy approaches taken toward the analysis and abatement of mercury pollution in the small-scale gold mining sector. Unmonitored releases of mercury from gold amalgamation have caused considerable environmental contamination and human health complications in rural reaches of sub-Saharan Africa, Latin America and Asia. Whilst these problems have caught the attention of the scientific community over the past 15-20 years, the research that has since been undertaken has failed to identify appropriate mitigation measures, and has done little to advance understanding of why contamination persists. Moreover, the strategies used to educate operators about the impacts of acute mercury exposure, and the technologies implemented to prevent farther pollution, have been marginally effective at best. The mercury pollution problem will not be resolved until governments and donor agencies commit to carrying out research aimed at improving understanding of the dynamics of small scale gold mining communities. Acquisition of this knowledge is the key to designing and implementing appropriate support and abatement measures. (c) 2005 Elsevier B.V. All rights reserved.

What is wrong with the global support facility for small-scale mining?

The World Bank, United Nations and UK Department for International Development (DfID) have spearheaded a recent global drive to regularize artisanal and small-scale mining (ASM), and provide assistance to its predominantly impoverished participants. To date, millions of dollars have been pledged toward the design of industry-specific policies and regulations; implementation of mechanized equipment; extension; and the launch of alternative livelihood (AL) programmes aimed at diversifying local economies. Much of this funding, however, has failed to facilitate marked improvements, and in many cases, has exacerbated problems. This paper argues that a poor understanding of artisanal, mine-community dynamics and operators’ needs has, in a number of cases, led to the design and implementation of inappropriate industry support schemes and interventions. The discussion focuses upon experiences from sub-Saharan Africa, where ASM is in the most rudimentary of states.

'A load too heavy': Critical reflections on the child labor problem in Africa's small-scale mining sector

This paper provides an extended analysis of the child labor problem in the artisanal and small-scale mining (ASM) sector, focusing specifically on the situation in sub-Saharan Africa. In recent years, the issue of child labor in ASM has garnered significant attention from the International Labor Organization (ILO), which has been particularly active in raising public awareness of the problem; and, has proceeded to implement policies and collaborative project work aimed at Curtailing children's participation in ASM activities in a number of African countries. The analysis concludes with a critical appraisal of an ILO project recently launched in the Talensi-Nabdam District in the Upper East Region of Ghana, which sheds light on how the child labor problem is being tackled in practice in ASM communities in sub-Saharan Africa. (c) 2008 Elsevier Ltd. All rights reserved.

Small-scale mining, poverty and economic development in sub-Saharan Africa: An overview

Artisanal and small-scale mining (ASM)-low tech, labour intensive mineral processing and excavation activity-is an economic mainstay in rural sub-Saharan Africa, providing direct employment to over two million people. This paper introduces a special issue on 'Small-scale mining, poverty and development in sub-Saharan Africa'. It focuses on the core conceptual issues covered in the literature, and the policy implications of the findings reported in the papers in this special issue. (C) 2009 Elsevier Ltd. All rights reserved.

Improving awareness of mercury pollution in small-scale gold mining communities: Challenges and ways forward in rural Ghana

This paper critiques the approach taken by the Ghanaian Government to address mercury pollution in the artisanal and small-scale gold mining sector. Unmonitored releases of mercury-used in the gold-amalgamation process-have caused numerous environmental complications throughout rural Ghana. Certain policy, technological and educational initiatives taken to address the mounting problem, however, have proved marginally effective at best, having been designed and implemented without careful analysis of mine community dynamics, the organization of activities, operators' needs and local geological conditions. Marked improvements can only be achieved in this area through increased government-initiated dialogue with the now-ostracized illegal galamsey mining community; introducing simple, cost-effective techniques for the reduction of mercury emissions; and effecting government-sponsored participatory training exercises as mediums for communicating information about appropriate technologies and the environment. (c) 2006 Elsevier Inc. All rights reserved.

Mercury: An agent of poverty in Ghana's small-scale gold-mining sector?

There is consensus worldwide that the artisanal and small-scale mining (ASM) sector is comprised of individuals who are trapped in a vicious cycle of poverty, lacking the necessary financial and technological means to improve their standards of living. Minimal work, however, has been undertaken to identify the very factors behind miners' plight, which inevitably vary from country to country. This paper uses a case study of Ghana to argue that an increased dependence upon mercury for amalgamation In artisanal gold-mining communities is one such-albeit overlooked-"agent of poverty". There is mounting empirical evidence which suggests that dealings with the monoponistic middlemen who supply mercury, purchases of costly medicines to remedy ailments caused by mercury poisoning, and a lack of appropriate safeguards and alternatives to amalgamation, are preventing gold miners from improving their practices and livelihoods. The solution to the problem lies in breaking this cycle of dependency, which can be achieved by providing miners with robust support services, mercury-free technologies and education. (c) 2006 Elsevier Ltd. All rights reserved.

Challenges with minimising mercury pollution in the small-scale gold mining sector: Experiences from the Guianas

This paper examines the barriers to mitigating mercury pollution at small-scale gold mines in the Guianas (Guyana, French Guiana and Suriname), and prescribes recommendations for overcoming these obstacles. Whilst considerable attention has been paid to analysing the environmental impacts of operations in the region, minimal research has been undertaken to identify appropriate policy and educational initiatives for addressing the mounting mercury problem. Findings from recent fieldwork and selected interviews with operators from Guyanese and Surinamese gold mining regions reveal that legislative incapacity, the region's varied industry policy stances, various technological problems, and low environmental awareness on the part of communities are impeding efforts to facilitate improved mercury management at small-scale gold mines in the Guianas. Marked improvements can be achieved, however, if legislation, particularly that pertaining to mercury, is harmonised in the region; educational seminars continue to be held in important mining districts; and additional outlets for disseminating environmental equipment and mercury-free technologies are provided.