Design, implementation and testing of an intelligent knowledge-based system for the supervisory control of a hot rolling mill

This paper describes the design, implementation and testing of an intelligent knowledge-based supervisory control (IKBSC) system for a hot rolling mill process. A novel architecture is used to integrate an expert system with an existing supervisory control system and a new optimization methodology for scheduling the soaking pits in which the material is heated prior to rolling. The resulting IKBSC system was applied to an aluminium hot rolling mill process to improve the shape quality of low-gauge plate and to optimise the use of the soaking pits to reduce energy consumption. The results from the trials demonstrate the advantages to be gained from the IKBSC system that integrates knowledge contained within data, plant and human resources with existing model-based systems. (c) 2005 Elsevier Ltd. All rights reserved.

Radon in homes and risk of lung cancer: collaborative analysis of individual data from 13 European case-control studies

Objective: To determine the risk of lung cancer associated with exposure at home to the radioactive disintegration products of naturally Occurring radon gas. Design: Collaborative analysis of individual data from 13 case-control studies of residential radon and lung cancer. Setting Nine European countries. Subjects 7148 cases Of lung cancer and 14 208 controls. Main outcome measures: Relative risks of lung cancer and radon gas concentrations in homes inhabited during the previous 5-34 years measured in becquerels (radon disintegrations per second) per cubic incite (Bq/m(3)) Of household air. Results: The mean measured radon concentration in homes of people in tire control group was 97 Bq/m(3), with 11% measuring > 200 and 4% measuring > 400 Bq/m(3). For cases of lung cancer the mean concentration was 104 Bq/m(3). The risk of lung cancer increased by 8.4% (95% confidence interval 3.0% to 15.8%) per 100 Bq/m(3) increase in measured radon (P = 0.0007). This corresponds to an increase of 16% (5% to 31%) per 100 Bq/m(3) increase in usual radon-that is, after correction for the dilution caused by random uncertainties in measuring radon concentrations. The dose-response relation seemed to be linear with no threshold and remained significant (P=0.04) in analyses limited to individuals from homes with measured radon < 200 Bq/m(3). The proportionate excess risk did not differ significantly with study, age, sex, or smoking. In the absence of other causes of death, the absolute risks of lung cancer by age 75 years at usual radon concentrations of 0, 100, and 400 Bq/m(3) would be about 0.4%, 0.5%, and 0.7%, respectively, for lifelong non-smokers, and about 25 times greater (10%, 12%, and 16%) for cigarette smokers. Conclusions: Collectively, though not separately, these studies show appreciable hazards from residential radon, particularly for smokers and recent ex-smokers, and indicate that it is responsible for about 2% of all deaths from cancer in Europe.

Developing protocols for nursery based scheduling trials

Most existing crop scheduling models are cultivar specific and are developed using academic resources. As such they rarely meet the particular needs of a grower. A series of protocols have been created to generate effective schedules for a changing product range using data generated on site at a commercial nursery. A screening programme has been developed to help determine a cultivar's photoperiod sensitivity and vernalisation requirement. Experimental conditions were obtained using a cold store facility set to 5degreesC and photoperiod cloches. Eight and 16 hour photoperiod treatments were achieved at low cost by growing plants in cloches of opaque plastic with a motorised rolling screen. Natural light conditions were extended where necessary using a high pressure sodium lamp. Batches of plants were grown according to different schedules based on these treatments. The screening programme found Coreopsis grandiflora 'Flying Saucers' to be a long day plant. Data to form the basis of graphical tracks was taken using variations on commercial schedules. The work provides a nursery based approach to the continuous improvement of crop scheduling practises.

Optimal foraging when regulating intake of multiple nutrients

There is growing evidence that, rather than maximizing energy intake subject to constraints, many animals attempt to regulate intake of multiple nutrients independently. In the complex diets of animals such as herbivores, the consumption of nutritionally imbalanced foods is sometimes inevitable, forcing trade-offs between eating too much of nutrients present in the foods in relative excess against too little of those in deficit. Such situations are not adequately represented in existing formulations of foraging theory. Here we provide the necessary theory to fit this case, using an approach that combines state-space models of nutrition with Tilman's models of resource exploitation (Tilman 1982, Resource Competition and Community Structure, Princeton: Princeton University Press). Our approach was to construct a smooth fitness landscape over nutrient space, centred on a 'target' intake at which no fitness cost is incurred, and this leads to a natural classification of the simple possible fitness landscapes based on Taylor series approximations of landscape shape. We next examined how needs for multiple nutrients can be assessed experimentally using direct measures of animal performance as the common currency, so that the nutritional strategies of animals can be mapped on to the performance surface, including the position of regulated points of intake and points of nutrient balance when fed suboptimal foods. We surveyed published data and conducted an experiment to map out the performance landscape of a generalist leaf-feeding caterpillar, Spodoptera littoralis. (C) 2004 Tire Association for the Study of Animal Behaviour. Poblished by Elsevier Ltd. All rights reserved.

Modelling fatigue damage distribution to inform slip and cut policy for riser tensioner ropes

The paper describes a method whereby the distribution of fatigue damage along riser tensioner ropes is calculated, taking account of heave motion, set tension, system geometry, tidal range and rope specification. From these data the distribution of damage along the rope is calculated for a given time period using a Miner’s summation method. This information can then be used to help the operator decide on the length of rope to ‘slip and cut’ whereby a length from the end of the rope is removed and the rope moved through the system from a storage drum such that sections of rope that have already suffered significant fatigue damage are not moved to positions where there is another peak in the distribution. There are two main advantages to be gained by using the fatigue damage model. The first is that it shows the amount of fatigue damage accumulating at different points along the rope, enabling the most highly damaged section to be removed well before failure. The second is that it makes for greater efficiency, as damage can be spread more evenly along the rope over time, avoiding the need to scrap long sections of undamaged rope.

Use of thermography and fibre optics microscopy for the evaluation of railway structures in the Athens Metro in Greece (Invited Paper)

Rolling Contact Fatigue (RCF) is one of the main issues that concern, at least initially, the head of the railway; progressively they can be of very high importance as they can propagate inside the material with the risk of damaging the railway. In this work, two different non-destructive techniques, infrared thermography (IRT) and fibre optics microscopy (FOM), were used in the inspection of railways for the tracing of defects and deterioration signs. In the first instance, two different approaches (dynamic and pulsed thermography) were used, whilst in the case of FOM, microscopic characterisation of the railway heads and classification of the deterioration -- damage on the railways according to the UIC (International Union of Railways) code, took place. Results from both techniques are presented and discussed.

Experimental model of the interfacial instability in aluminium reduction cells

A solution has been found to the long-standing problem of experimental modelling of the interfacial instability in aluminium reduction cells. The idea is to replace the electrolyte overlaying molten aluminium with a mesh of thin rods supplying current down directly into the liquid metal layer. This eliminates electrolysis altogether and all the problems associated with it, such as high temperature, chemical aggressiveness of media, products of electrolysis, the necessity for electrolyte renewal, high power demands, etc. The result is a room temperature, versatile laboratory model which simulates Sele-type, rolling pad interfacial instability. Our new, safe laboratory model enables detailed experimental investigations to test the existing theoretical models for the first time.

Benchmarking and setting intervention targets for key cell count parameters

Herd Companion uses routine milk‐recording records to generate twelve‐month rolling averages that indicate performance trends. This article looks at Herd Somatic Cell Count (SCC) and four other SCC‐related parameters from 252 National Milk Records (NMR) recorded herds to assess how each parameter correlates with the Herd SCC. The analysis provides evidence for the importance of targeting individual cows with high SCC recordings (>200,000 cells/ml and >500,000 cells/ml) and/or individual cows with repeatedly high SCC recordings (chronic high SCC) and/or cows that begin lactation with a high SCC recording (dry period infection) in order to achieve bulk milk Herd SCC below 200,000 cells/ml.

Is there a “case for property” all the time?

The “case for property” in the mixed-asset portfolio is a topic of continuing interest to practitioners and academics. Such an analysis typically is performed over a fixed period of time and the optimum allocation to property inferred from the weight assigned to property through the use of mean-variance analysis. It is well known, however, that the parameters used in the portfolio analysis problem are unstable through time. Thus, the weight proposed for property in one period is unlikely to be that found in another. Consequently, in order to assess the case for property more thoroughly, the impact of property in the mixed-asset portfolio is evaluated on a rolling basis over a long period of time. In this way we test whether the inclusion of property significantly improves the performance of an existing equity/bond portfolio all of the time. The main findings are that the inclusion of direct property into an existing equity/bond portfolio leads to increase or decreases in return, depending on the relative performance of property compared with the other asset classes. However, including property in the mixed-asset portfolio always leads to reductions in portfolio risk. Consequently, adding property into an equity/bond portfolio can lead to significant increases in risk-adjusted performance. Thus, if the decision to include direct property in the mixed-asset portfolio is based upon its diversification benefits the answer is yes, there is a “case for property” all the time!