A potential energy surface for the ground state of acetylene, C2H2

A potential energy function has been derived for the ground state surface of C2H2 as a many-body expansion. The 2- and 3-body terms have been obtained by preliminary investigation of the ground state surfaces of CH2( 3B1) and C2H( 2Σ+). A 4-body term has been derived which reproduces the energy, geometry and harmonic force field of C2H2. The potential has a secondary minimum corresponding to the vinylidene structure and the geometry and energy of this are in close agreement with predictions from ab initio calculations. The saddle point for the HCCH-H2CC rearrangement is predicted to lie 2•530 eV above the acetylene minimum.

The reaction of flavonoid metabolites with peroxynitrite

There is much interest in the bioactivity of in vivo flavonoid metabolites. We report for the first time the hierarchy of reactivity of flavonoid metabolites with peroxynitrite and characterise novel reaction products. O-Methylation of the B-ring catechol containing flavonoids epicatechin and quercetin, and O-glucuronidation of all flavonoids reduced their reactivity with peroxynitrite. The reaction of the flavanones hesperetin and naringenin and their glucuronides resulted in the formation of multiple mono-nitrated and nitrosated products. In contrast, the catechol-containing flavonoids epicatechin and quercetin yielded oxidation products which when trapped with glutathione led to the production of glutathionyl-conjugates. However, the O-methylated metabolites of epicatechin yielded both mono-and di-nitrated products and nitrosated metabolites. The 3'-O-methyl metabolite of quercetin also yielded a nitrosated species, although its counterpart 4'-O-methyl quercetin yielded only oxidation products. Such products may represent novel metabolic products in vivo and may also express cellular activity. (c) 2006 Elsevier Inc. All rights reserved.

Synthesis and NMR spectroscopic analysis of 3-nitro-pyranoside, 3-nitro-septanoside and 4-nitro-septanoside derivatives by condensation of the anion of nitromethane with glycoside

The utility of the nitroaldol reaction for accessing 3-nitro-pyranoside, 3-nitro-septanoside or 4-nitro-septanoside derivatives, by reaction of the anion of nitromethane with glycoside dialdehydes is demonstrated. Initially, the feasibility of using unprotected glucoside dialdehydes was probed for the synthesis of the septanoside products, but this affoided pyranoside rather than septanoside targets. Subsequent studies utilised protected glycoside dialdehydes within the methodology, which allowed entry into a range of 3-nitro or 4-nitro-septanosides in good yield NMR spectroscopic analysis allowed determination of the stereochemistry of each of the products thus afforded.

Evaluation of cacao (Theobroma cacao L.) clones against seven Colombian isolates of Moniliophthora roreri (Cif.) Evans et al., representing four major genetic groupings of the pathogen in cacao

Artificial pod inoculation was used to compare the relative aggressiveness of seven Colombian isolates of Moniliophthora roreri (the causal agent of moniliasis or frosty pod disease), representing four major genetic groupings of the pathogen in cacao (cocoa), when applied to five diverse cacao genotypes (ICS-1, ICS-95, TSH-565, SCC-61 and CAP-34) at La Suiza Experimental Farm, Santander Department, Colombia. The following variables were evaluated 9 weeks after inoculation of 2- to 3-month-old pods with spore suspensions (1.2 x 10(5) spores mL(-1)): (i) disease incidence (DI); (ii) external severity (ES); and (iii) internal severity (IS). IS was found to be of greatest value in classifying the reaction of the host genotype against M. roreri. Genetic variation reported between isolates and cacao genotypes was not matched by similar diversity in their aggressiveness. All isolates were generally highly aggressive against most cacao genotypes, with only two isolates showing reduced IS and ES reactions. There was considerable variation between clones in the IS and ES scores, but one cultivated clone (ICS-95) displayed a significant level of resistance against all seven isolates. This clone may be useful in cacao breeding initiatives for resistance to moniliasis of cacao.

Inverse agonism of the antipsychotic drugs at the D-2 dopamine receptor

The antipsychotic drugs had been assumed to act as antagonists at D-2 dopamine receptors but recently these drugs have been shown to possess inverse agonist properties at this receptor. Inverse agonism may be demonstrated from the ability of these drugs to potentiate forskolin-stimulated cAMP accumulation or to suppress agonist-independent [S-35]GTPgammaS binding. The antipsychotic drugs tested generally appear as full inverse agonists in these assays regardless of chemical or therapeutic class. The mechanism of inverse agonism of the antipsychotic drugs is still unclear but may involve stabilisation of the ground state of the D-2 receptor. (C) 2003 Elsevier Science B.V All rights reserved.

A potential energy surface for the ground state of formaldehyde, H2CO(1A1)

A model potential energy function for the ground state of H2CO has been derived which covers the whole space of the six internal coordinates. This potential reproduces the experimental energy, geometry and quadratic force field of formaldehyde, and dissociates correctly to all possible atom, diatom and triatom fragments. Thus there are good reasons for believing it to be close to the true potential energy surface except in regions where both hydrogen atoms are close to the oxygen. It leads to the prediction that there should be a metastable singlet hydroxycarbene HCOH which has a planar trans structure and an energy of 2•31 eV above that of equilibrium formaldehyde. The reaction path for dissociation into H2 + CO is predicted to pass through a low symmetry transition state with an activation energy of 4•8 eV. Both of these predictions are in good agreement with recently published ab initio calculations.

Gas-solid reactions of single crystals: a study of the reaction of bromine with single crystals of trans-cinnamic acid and a range of its derivatives by infrared and Raman microspectroscopy

Single crystals of trans-cinnamic acid and of a range of derivatives of this compound containing halogen substituents on the aromatic ring have been reacted with 165 Torr pressure of bromine vapour in a sealed desiccator at 20 degrees C for 1 week. Infrared and Raman microspectroscopic examination of the crystals shows that bromination of the aliphatic double bond, but not of the aromatic ring, has occurred. It is demonstrated also that the reaction is truly gas-solid in nature. A time-dependent study of these reactions shows that they do not follow a smooth diffusion-controlled pathway. Rather the reactions appear to be inhomogeneous and to occur at defects within the crystal. The reaction products are seen to flake from the surface of the crystal. It is shown, therefore, that these are not single crystal to single crystal transitions, as have been observed previously for the photodimerisation of trans-cinnamic acid and several of its derivatives. It is shown that there are no by-products of the reaction and that finely ground samples react to form the same products as single crystals.

Assessment of the consistency of near-infrared water vapor line intensities using high-spectral-resolution ground-based Fourier transform measurements of solar radiation

Calculations of the absorption of solar radiation by atmospheric gases, and water vapor in particular, are dependent on the quality of databases of spectral line parameters. There has been increasing scrutiny of databases such as HITRAN in recent years, but this has mostly been performed on a band-by-band basis. We report nine high-spectral-resolution (0.03 cm(-1)) measurements of the solar radiation reaching the surface in southern England over the wave number range 2000 to 12,500 cm(-1) (0.8 to 5 mm) that allow a unique assessment of the consistency of the spectral line databases over this entire spectral region. The data are assessed in terms of the modeled water vapor column that is required to bring calculations and observations into agreement; for an entirely consistent database, this water vapor column should be constant with frequency. For the HITRAN01 database, the spread in water vapor column is about 11%, with distinct shifts between different spectral regions. The HITRAN04 database is in significantly better agreement (about 5% spread) in the completely updated 3000 to 8000 cm(-1) spectral region, but inconsistencies between individual spectral regions remain: for example, in the 8000 to 9500 cm(-1) spectral region, the results indicate an 18% (+/- 1%) underestimate in line intensities with respect to the 3000 to 8000 cm(-1) region. These measurements also indicate the impact of isotopic fractionation of water vapor in the 2500 to 2900 cm(-1) range, where HDO lines dominate over the lines of the most abundant isotope of H2O.

Analytical functions for the ground state potential surfaces of C3 (X 1 Σ g+) and HCN (X 1 Σ +)

Analytic functions have been obtained to represent the potential energy surfaces of C3 and HCN in their ground electronic states. These functions closely reproduce the available data on the energy, geometry, and force constants in all stable conformations, as well as data on the various dissociation products, and ab initio calculations of the energy at other conformations. The form of the resulting surfaces are portrayed in various ways and discussed briefly.

The high-resolution infrared spectrum of HOF near 2700 cm-1: the ground and 2v2 states

The a/b hybrid-type ν1 fundamental and 2ν2 overtone bands of HOF were investigated by FTIR spectroscopy with a resolution close to 0.008 cm−1. Improved ground state parameters of HOF were determined from a merge of more than 3000 ground state combination differences formed from ν1 and previously measured ν2 transitions with the reported pure rotational lines. Excited state parameters of the v2 = 2 state, ν0 = 2686.924 6(1) and χ22 = −9.942 4(1) cm−1, were determined employing Watson's A-reduced Hamiltonian up to sixth order in I′ representation. The 2ν2 state was found to be unperturbed, the excited state parameters being closely related to those of ν2.

An investigation of the germylene addition reaction, GeH2+C2H2: Time-resolved gas-phase kinetic studies and quantum chemical calculations of the reaction energy surface

Time resolved studies of germylene, GeH2, generated by laser flash photolysis of 3,4-dimethylgermacyclopentene-3, have been carried out to obtain rate constants for its bimolecular reaction with acetylene, C2H2. The reaction was studied in the gas-phase over the pressure range 1-100 Tort, with SF6 as bath gas, at 5 temperatures in the range 297-553 K. The reaction showed a very slight pressure dependence at higher temperatures. The high pressure rate constants (obtained by extrapolation at the three higher temperatures) gave the Arrhenius equation: log(k(infinity)/cm(3) molecule(-1) s(-1)) (-10.94 +/- 0.05) + (6.10 +/- 0.36 kJ mol(-1))/RTln10. These Arrhenius parameters are consistent with a fast reaction occurring at approximately 30% of the collision rate at 298 K. Quantum chemical calculations (both DFT and ab initio G2//B3LYP and G2//QCISD) of the GeC2H4 potential energy surface (PES), show that GeH2 + C2H2 react initially to form germirene which can isomerise to vinylgermylene with a relatively low barrier. RRKM modelling, based on a loose association transition state, but assuming vinylgermylene is the end product (used in combination with a weak collisional deactivation model) predicts a strong pressure dependence using the calculated energies, in conflict with the experimental evidence. The detailed GeC2H4 PES shows considerable complexity with ten other accessible stable minima (B3LYP level), the three most stable of which are all germylenes. Routes through this complex surface were examined in detail. The only product combination which appears capable of satisfying the (P-3) + C2H4.C2H4 was confirmed as a product by GC observed lack of a strong pressure dependence is Ge(P-3) + C2H4. C2H4 was confirmed as a product by GC analysis. Although the formation of these products are shown to be possible by singlet-triplet curve crossing during dissociation of 1-germiranylidene (1-germacyclopropylidene), it seems more likely (on thermochernical grounds) that the triplet biradical, (GeCH2CH2.)-Ge-., is the immediate product precursor. Comparisons are made with the reaction of SiH2 with C2H2.