Partial identification of spirochaetes from two dairy cows with digital dermatitis by polymerase chain reaction analysis of the 16S ribosomal RNA gene

Specimens taken postmortem from typical lesions of digital dermatitis in two dairy cows were tested by the polymerase chain reaction (PCR) for the presence of a spirochaetal 16S rRNA gene. Seven different assays detected the gene in the samples from both cows. Two of the PCR products were sequenced and a comparison of the nucleotide sequences revealed that the spirochaete belonged to the genus Treponema and was closely related to Treponema denticola. A PCR specific for the detection of the digital dermatitis-associated treponeme was developed.

Distribution of mosquitoes in the South East of Argentina and first report on the analysis based on 18S rDNA and COI sequences

Although Mar del Plata is the most important city on the Atlantic coast of Argentina, mosquitoes inhabiting such area are almost uncharacterized. To increase our knowledge in their distribution, we sampled specimens of natural populations. After the morphological identification based on taxonomic keys, sequences of DNA from small ribosomal subunit (18S rDNA) and cytochrome c oxidase I (COI) genes were obtained from native species and the phylogenetic analysis of these sequences were done. Fourteen species from the genera Uranotaenia, Culex, Ochlerotatus and Psorophora were found and identified. Our 18S rDNA and COI-based analysis indicates the relationships among groups at the supra-species level in concordance with mosquito taxonomy. The introduction and spread of vectors and diseases carried by them are not known in Mar del Plata, but some of the species found in this study were reported as pathogen vectors.

Calcrete profile development in quaternary alluvial sequences, southeast Spain: Implications for using calcretes as a basis for landform chronologies

A detailed study of the morphology and micro-morphology of Quaternary alluvial calcrete profiles from the Sorbas Basin shows that calcretes may be morphologically simple or complex. The 'simple' profiles reflect pedogenesis occurring after alluvial terrace formation and consist of a single pedogenic horizon near the land surface. The 'complex' profiles reflect the occurrence of multiple calcrete events during terrace sediment aggradation and further periods of pedogenesis after terrace formation. These 'complex' calcrete profiles are consequently described as composite profiles. The exact morphology of the composite profiles depends upon: (1) the number of calcrete-forming events occurring during terrace sediment aggradation; (2) the amount of sediment accretion that occurs between each period of calcrete formation; and (3) the degree of pedogenesis after terrace formation. Simple calcrete profiles are most useful in establishing landform chronologies because they represent a single phase of pedogenesis after terrace formation. Composite profiles are more problematic. Pedogenic calcretes that form within them may inherit carbonate from calcrete horizons occurring lower down in the terrace sediments. In addition erosion may lead to the exhumation of older calcretes within the terrace sediment. Calcrete 'inheritance' may make pedogenic horizons appear more mature than they actually are and produce horizons containing carbonate embracing a range of ages. Calcrete exhumation exposes calcrete horizons whose morphology and radiometric ages are wholly unrelated to terrace surface age. Composite profiles are, therefore, only suitable for chronological studies if the pedogenic horizon capping the terrace sequence can be clearly distinguished from earlier calcrete-forming events. Thus, a detailed morphological/micro-morphological study is required before any chronological study is undertaken. This is the only way to establish whether particular calcrete profiles are suitable for dating purposes. Copyright (C) 2003 John Wiley Sons, Ltd.

Producing Inequalities: Regional Sequences in Later Prehistoric Southern Spain

This paper presents regional sequences of production, consumption and Social relations ill Southern Spain from the beginning of the Neolithic to the Early Bronze Age (c. 5600-1550 BC). The regions Studied are southeast Spain, Valencia, the southern Meseta and central/western Andalucia. The details presented for each region and period vary in quality but Show how Much our knowledge of the archaeological record of southern Spain has changed during the last four decades. Among the Surprises are the rapidity of agricultural adoption. the emergence of regional centres of aggregated population in enclosed/fortified settlements of up to 400 hectares in the fourth and third millennia BC. the use of copper objects as instruments of production, rather than as items With 11 purely symbolic of 'prestige' value, large-scale copper production in western Andalucia in the third millennium BC (as opposed to the usual domestic production model), and the inference of societies based oil relations of class.

Wiggle-match dating of tree-ring sequences

Given the non-monotonic form of the radiocarbon calibration curve, the precision of single C-14 dates on the calendar timescale will always be limited. One way around this limitation is through comparison of time-series, which should exhibit the same irregular patterning as the calibration curve. This approach can be employed most directly in the case of wood samples with many years growth present (but not able to be dated by dendrochronology), where the tree-ring series of unknown date can be compared against the similarly constructed C-14 calibration curve built from known-age wood. This process of curve-fitting has come to be called "wiggle-matching." In this paper, we look at the requirements for getting good precision by this method: sequence length, sampling frequency, and measurement precision. We also look at 3 case studies: one a piece of wood which has been independently dendrochronologically dated, and two others of unknown age relating to archaeological activity at Silchester, UK (Roman) and Miletos, Anatolia (relating to the volcanic eruption at Thera).

Pleistocene geochronologies for fluvial sedimentary sequences: an archaeologist's perspective

Current models of Pleistocene fluvial system development and dynamics are assessed from the perspective of European Lower and Middle Palaeolithic stone tool assemblages recovered from fluvial secondary contexts. Fluvial activity is reviewed both in terms of Milankovitch-scale processes across the glacial/interglacial cycles of the Middle and Late Pleistocene, and in response to sub-Milankovitch scale, high-frequency, low-magnitude climatic oscillations. The chronological magnitude of individual phases of fluvial activity is explored in terms of radiocarbon-dated sequences from the Late Glacial and early Holocene periods. It is apparent that fluvial activity is associated with periods of climatic transition, both high and low magnitude, although system response is far more universal in the case of the high magnitude glacial/ interglacial transitions. Current geochronological tools do not permit the development of high-resolution sequences for Middle Pleistocene sediments, while localised erosion and variable system responses do not facilitate direct comparison with the ice core records. However, Late Glacial and early Holocene sequences indicate that individual fluvial activity phases are relatively brief in duration (e.g. 10(2) and 10(3) yr). From an archaeological perspective, secondary context assemblages can only be interpreted in terms of a floating geochronology, although the data also permit a reinvestigation of the problems of artefact reworking. Copyright (c) 2005 John Wiley I Sons, Ltd.

Plant U13 orthologues and orphan snoRNAs identified by RNomics of RNA from Arabidopsis nucleoli

Small nucleolar RNAs (snoRNAs) and small Cajal body-specific RNAs (scaRNAs) are non-coding RNAs whose main function in eukaryotes is to guide the modification of nucleotides in ribosomal and spliceosomal small nuclear RNAs, respectively. Full-length sequences of Arabidopsis snoRNAs and scaRNAs have been obtained from cDNA libraries of capped and uncapped small RNAs using RNA from isolated nucleoli from Arabidopsis cell cultures. We have identified 31 novel snoRNA genes (9 box C/D and 22 box H/ACA) and 15 new variants of previously described snoRNAs. Three related capped snoRNAs with a distinct gene organization and structure were identified as orthologues of animal U13snoRNAs. In addition, eight of the novel genes had no complementarity to rRNAs or snRNAs and are therefore putative orphan snoRNAs potentially reflecting wider functions for these RNAs. The nucleolar localization of a number of the snoRNAs and the localization to nuclear bodies of two putative scaRNAs was confirmed by in situ hybridization. The majority of the novel snoRNA genes were found in new gene clusters or as part of previously described clusters. These results expand the repertoire of Arabidopsis snoRNAs to 188 snoRNA genes with 294 gene variants.

Molecular tools to investigate Rhizoctonia solani distribution in soil

Real-time PCR protocols were developed to detect and discriminate 11 anastomosis groups (AGs) of Rhizoctonia solani using ribosomal internal transcribed spacer (ITS) regions (AG-1-IA, AG-1-IC, AG-2-1, AG-2-2, AG-4HGI+II, AG-4HGIII, AG-8) or beta-tubulin (AG-3, AG-4HGII, AG-5 and AG-9) sequences. All real-time assays were target group specific, except AG-2-2, which showed a weak cross-reaction with AG-2tabac. In addition, methods were developed for the high throughput extraction of DNA from soil and compost samples. The DNA extraction method was used with the AG-2-1 assay and shown to be quantitative with a detection threshold of 10-7 g of R. solani per g of soil. A similar DNA extraction efficiency was observed for samples from three contrasting soil types. The developed methods were then used to investigate the spatial distribution of R. solani AG-2-1 in field soils. Soil from shallow depths of a field planted with Brassica oleracea tested positive for R. solani AG-2-1 more frequently than soil collected from greater depths. Quantification of R. solani inoculum in field samples proved challenging due to low levels of inoculum in naturally occurring soils. The potential uses of real-time PCR and DNA extraction protocols to investigate the epidemiology of R. solani are discussed.

DNA barcoding of a large genus, Aspalathus L. (Fabaceae)

The DNA barcode potential of three regions (the nuclear ribosomal ITS and the plastid psbA-trnH and trnT-trnL intergenic spacers) was investigated for the plant genus Aspalathus L. (Fabaceac: Crotalarieae). Aspalathus is a large genus (278 species) that revealed low levels of DNA variation in phylogenetic studies. In a 51-species dataset for the psbA-trnH and ITS regions, 45%, and 16% of sequences respectively were identical to the sequence of at least one other species, with two species undiscriminated even when the two regions were combined. In contrast, trnT-trnL, discriminated between all species in this dataset. In a larger ITS and trnT-trnL dataset. including a further 82 species. 7 species in five pairwise comparisons remained Undiscriminated when the two regions were combined. Four of the five pairs of species not discriminated by sequence data were readily distinguished using a combination of qualitative and quantitative morphological data. The difficulty of barcoding in this group is increased by the presence of intraspecific variation in all three regions studied. In the case of psbA-trnH, three intraspecific samples had a sequence identical to at least one other species. Overall, psbA-trnH. currently a candidate for plant barcoding, was the least discriminatory region in our study.

Aligning sequences to structures

Most newly sequenced proteins are likely to adopt a similar structure to one which has already been experimentally determined. For this reason, the most successful approaches to protein structure prediction have been template-based methods. Such prediction methods attempt to identify and model the folds of unknown structures by aligning the target sequences to a set of representative template structures within a fold library. In this chapter, I discuss the development of template-based approaches to fold prediction, from the traditional techniques to the recent state-of-the-art methods. I also discuss the recent development of structural annotation databases, which contain models built by aligning the sequences from entire proteomes against known structures. Finally, I run through a practical step-by-step guide for aligning target sequences to known structures and contemplate the future direction of template-based structure prediction.

Phylogeny, biogeography, and ecology of Ficus section Malvanthera (Moraceae)

We conducted the first molecular phylogenetic study of Ficus section Malvanthera (Moraceae; subgenus Urostigma) based on 32 Malvanthera accessions and seven outgroups representing other sections of Ficus subgenus Urostigma. We used DNA sequences from the nuclear ribosomal internal and external transcribed spacers (ITS and ETS), and the glyceraldehyde-3-phosphate dehydrogenase (G3pdh) region. Phylogenetic analysis using maximum parsimony, maximum likelihood and Bayesian methods recovered a monophyletic section Malvanthera to the exclusion of the rubber fig, Ficus elastica. The results of the phylogenetic analyses do not conform to any previously proposed taxonomic subdivision of the section and characters used for previous classification are homoplasious. Geographic distribution, however, is highly conserved and Melanesian Malvanthera are monophyletic. A new subdivision of section Malvanthera reflecting phylogenetic relationships is presented. Section Malvanthera likely diversified during a period of isolation in Australia and subsequently colonized New Guinea. Two Australian series are consistent with a pattern of dispersal out of rainforest habitat into drier habitats accompanied by a reduction in plant height during the transition from hemi-epiphytic trees to lithophytic trees and shrubs. In contradiction with a previous study of Pleistodontes phylogeny suggesting multiple changes in pollination behaviour, reconstruction of changes in pollination behaviour on Malvanthera, suggests only one or a few gains of active pollination within the section. (C) 2008 Elsevier Inc. All rights reserved.

Origin and evolution of a myxozoan worm

Buddenbrockia pluinatellae is an active, muscular, worm-shaped parasite of freshwater bryozoans. This rare and enigmatic animal has been assigned to the Myxozoa on the basis of 18S ribosomal DNA sequences and the presence of malacosporean spores. Here we report cloning of four homologous protein-coding genes from Buddenbrockia worms, the putatively conspecific sac-shaped parasite originally described as Tetracapsula bryozoides and the related sac-shaped parasite Tetracapsuloides bryosalmonae, the causative agent of proliferative kidney disease in salmonid fish. Analyses are consistent with the hypothesis that Buddenbrockia is indeed a malacosporean myxozoan, but do not provide support for conspecificity with either T. bryozoides or T. bryosalmonae. Implications for the evolution of worm-like body plans in the Myxozoa are discussed.

A test of the master gene hypothesis for interspersed repetitive DNA sequences

Many families of interspersed repetitive DNA elements, including human Alu and LINE (Long Interspersed Element) elements, have been proposed to have accumulated through repeated copying from a single source locus: the "master gene." The extent to which a master gene model is applicable has implications for the origin, evolution, and function of such sequences. One repetitive element family for which a convincing case for a master gene has been made is the rodent ID (identifier) elements. Here we devise a new test of the master gene model and use it to show that mouse ID element sequences are not compatible with a strict master gene model. We suggest that a single master gene is rarely, if ever, likely to be responsible for the accumulation of any repeat family.

Evolution of micromorphological and chemical characters in the lichen-forming fungal family Pertusariaceae

Micromorphological characters of the fruiting bodies, such as ascus-type and hymenial amyloidity, and secondary chemistry have been widely employed as key characters in Ascomycota classification. However, the evolution of these characters has yet not been studied using molecular phylogenies. We have used a combined Bayesian and maximum likelihood based approach to trace character evolution on a tree inferred from a combined analysis of nuclear and mitochondrial ribosomal DNA sequences. The maximum likelihood aspect overcomes simplifications inherent in maximum parsimony methods, whereas the Markov chain Monte Carlo aspect renders results independent of any particular phylogenetic tree. The results indicate that the evolution of the two chemical characters is quite different, being stable once developed for the medullary lecanoric acid, whereas the cortical chlorinated xanthones appear to have been lost several times. The current ascus-types and the amyloidity of the hymenial gel in Pertusariaceae appear to have been developed within the family. The basal ascus-type of pertusarialean fungi remains unknown. (c) 2006 The Linnean Society of London, Biological Journal of the Linnean Society, 2006, 89, 615-626.