On the potential of assimilating meteorological analyses in a global climate model for the purpose of model validation

A simple four-dimensional assimilation technique, called Newtonian relaxation, has been applied to the Hamburg climate model (ECHAM), to enable comparison of model output with observations for short periods of time. The prognostic model variables vorticity, divergence, temperature, and surface pressure have been relaxed toward European Center for Medium-Range Weather Forecasts (ECMWF) global meteorological analyses. Several experiments have been carried out, in which the values of the relaxation coefficients have been varied to find out which values are most usable for our purpose. To be able to use the method for validation of model physics or chemistry, good agreement of the model simulated mass and wind field is required. In addition, the model physics should not be disturbed too strongly by the relaxation forcing itself. Both aspects have been investigated. Good agreement with basic observed quantities, like wind, temperature, and pressure is obtained for most simulations in the extratropics. Derived variables, like precipitation and evaporation, have been compared with ECMWF forecasts and observations. Agreement for these variables is smaller than for the basic observed quantities. Nevertheless, considerable improvement is obtained relative to a control run without assimilation. Differences between tropics and extratropics are smaller than for the basic observed quantities. Results also show that precipitation and evaporation are affected by a sort of continuous spin-up which is introduced by the relaxation: the bias (ECMWF-ECHAM) is increasing with increasing relaxation forcing. In agreement with this result we found that with increasing relaxation forcing the vertical exchange of tracers by turbulent boundary layer mixing and, in a lesser extent, by convection, is reduced.

BIM: innovation in design management, influence and challenges of implementation

The construction industry is widely being criticised as a fragmented industry. There are mounting calls for the industry to change. The espoused change calls for collaboration as well as embracing innovation in the process of design, construction and across the supply chain. Innovation and the application of emerging technologies are seen as enablers for integrating the processes ‘integrating the team’ such as building information modelling (BIM). A questionnaire survey was conducted to ascertain change in construction with regard to design management, innovation and the application of BIM as cutting edge pathways for collaboration. The respondents to the survey were from an array of designations across the construction industry such as construction managers, designers, engineers, design coordinators, design managers, architects, architectural technologists and surveyors. There was a general agreement by most respondents that the design team was responsible for design management in their organisation. There is a perception that the design manager and the client are the catalyst for advancing innovation. The current state of industry in terms of incorporating BIM technologies is posing a challenge as well as providing an opportunity for accomplishment. BIM technologies provide a new paradigm shift in the way buildings are designed, constructed and maintained. This paradigm shift calls for rethinking the curriculum for educating building professionals, collectively.

Taxonomy of purpose of Enterprise Architecture

Initial phase of all Enterprise Architecture (EA) initiatives is important. One of the most crucial tasks in that phase is to sell EA to the top management by explaining its purpose. In this paper, by using semiotic framework we show that there is a clear gap between the definition of EA and its purpose. Contribution of this paper is a taxonomy that expands knowledge of pragmatics of EA, and that can be used as a tool for explaining the purpose of EA. Grounded theory is used to form the taxonomy. Data is collected from a discussion group used by EA practitioners. Results indicate that the purpose of EA is to meet organisations‟ stakeholder‟s goals and to create value to organisation. Results are in line with current literature. Most interesting result is that EA practitioners seem to realise that technical solutions are not the purpose of EA, but means for fulfilling it.

A review and implementation of swarm pattern formation and transformation models

Purpose: The purpose of this paper is to address a classic problem – pattern formation identified by researchers in the area of swarm robotic systems – and is also motivated by the need for mathematical foundations in swarm systems. Design/methodology/approach: The work is separated out as inspirations, applications, definitions, challenges and classifications of pattern formation in swarm systems based on recent literature. Further, the work proposes a mathematical model for swarm pattern formation and transformation. Findings: A swarm pattern formation model based on mathematical foundations and macroscopic primitives is proposed. A formal definition for swarm pattern transformation and four special cases of transformation are introduced. Two general methods for transforming patterns are investigated and a comparison of the two methods is presented. The validity of the proposed models, and the feasibility of the methods investigated are confirmed on the Traer Physics and Processing environment. Originality/value: This paper helps in understanding the limitations of existing research in pattern formation and the lack of mathematical foundations for swarm systems. The mathematical model and transformation methods introduce two key concepts, namely macroscopic primitives and a mathematical model. The exercise of implementing the proposed models on physics simulator is novel.

Office sustainability: occupier perceptions and implementation of policy

Purpose – The purpose of this research was twofold. First, to investigate the views of occupiers in a typical UK city on the importance of various sustainability issues, their perceived impact of different sustainability drivers and willingness to pay. Second, the environmental and social performance of existing buildings in that city was examined. Design/methodology/approach – The research focuses on buildings of 10,000 feet2 or more that have been constructed in the Bristol city-region in the UK over the past 50 years. The buildings in the sample are located in the city centre and in out-of-town business parks. A questionnaire survey investigated the views of occupiers and follow-up interviews looked more closely at the sustainability performance of the existing stock. Findings – The findings indicate that, as far as occupiers are concerned, the strongest drivers are consumer demand and staff demand. Green features of a building appear to rank low in the overall building selection preference structure and a willingness to pay a premium for green features was indicated. The interviews uncovered barriers to progress as well as initiatives to reduce both energy consumption and the environmental impact of office space. Practical implications – The paper identifies progress and issues which could form obstacles to improving the environmental performance of office buildings. It is argued that there is a need to focus on energy efficiency. Originality/value – This paper explores the linkage between the perception and use of office space by occupants and how this affects the environmental performance of this space.

Phylloxera and the grapevine: a sense of common purpose?

The purpose of life is its continuation: survival is the reason things live. Here we explore this 'basic' of biology, by reference to the extraordinary life-cycle of the aphid-like pest phylloxera, and the complexity of its relationship with its host the grapevine. The effort and ingenuity that phylloxera employs to continue itself leads to a doubt that survival alone is sufficient reason. It has frequently been suggested that the reduction of life to a catalogue of facts (by science) creates this doubt, because it robs existence of its essence (which is something other than its mechanics). The part that science is said to steal is what Robert Pirsig calls Quality-the harmonious balance of things. Pirsig seems to imply that this is something inherent in things-and independent from us. A more mundane explanation is that the difference between facts and the complete reality is us-the tendency of mind to connect freely between different kinds of information. This possibility is briefly illustrated here by a myth based on the facts of phylloxera.

Reliability in the whole life cycle of building systems

Purpose – The purpose of this research is to show that reliability analysis and its implementation will lead to an improved whole life performance of the building systems, and hence their life cycle costs (LCC). Design/methodology/approach – This paper analyses reliability impacts on the whole life cycle of building systems, and reviews the up-to-date approaches adopted in UK construction, based on questionnaires designed to investigate the use of reliability within the industry. Findings – Approaches to reliability design and maintainability design have been introduced from the operating environment level, system structural level and component level, and a scheduled maintenance logic tree is modified based on the model developed by Pride. Different stages of the whole life cycle of building services systems, reliability-associated factors should be considered to ensure the system's whole life performance. It is suggested that data analysis should be applied in reliability design, maintainability design, and maintenance policy development. Originality/value – The paper presents important factors in different stages of the whole life cycle of the systems, and reliability and maintainability design approaches which can be helpful for building services system designers. The survey from the questionnaires provides the designers with understanding of key impacting factors.

The effects of the RAW filter on the climatology and forecast skill of the SPEEDY model

In a recent study, Williams introduced a simple modification to the widely used Robert–Asselin (RA) filter for numerical integration. The main purpose of the Robert–Asselin–Williams (RAW) filter is to avoid the undesired numerical damping of the RA filter and to increase the accuracy. In the present paper, the effects of the modification are comprehensively evaluated in the Simplified Parameterizations, Primitive Equation Dynamics (SPEEDY) atmospheric general circulation model. First, the authors search for significant changes in the monthly climatology due to the introduction of the new filter. After testing both at the local level and at the field level, no significant changes are found, which is advantageous in the sense that the new scheme does not require a retuning of the parameterized model physics. Second, the authors examine whether the new filter improves the skill of short- and medium-term forecasts. January 1982 data from the NCEP–NCAR reanalysis are used to evaluate the forecast skill. Improvements are found in all the model variables (except the relative humidity, which is hardly changed). The improvements increase with lead time and are especially evident in medium-range forecasts (96–144 h). For example, in tropical surface pressure predictions, 5-day forecasts made using the RAW filter have approximately the same skill as 4-day forecasts made using the RA filter. The results of this work are encouraging for the implementation of the RAW filter in other models currently using the RA filter.

Keeping Hertfordshire green: the implementation of strategic environmental policy 1983-1993

This paper evaluates the implementation of environmental policy in the County of Hertfordshire during the 1980's and early 1990's. It emphasises that the recent growth of interest in environmental policy and sustainable planning initiatives should not cause researchers and practitioners to ignore the long history and experience of environmental policy implementation in local government. By looking at the experience of strategic environmental policy in Hertfordshire, the paper identifies the successes and failures of a range of implementation tools utilised by the County and district planning authorities to progress policies concerned with the conservation and improvement of urban and rural environments. It concludes that the planning authorities of Hertfordshire have stabilised the deterioration in the County's environment and have established some programmes which provide good examples of coordinated action in environmental policy implementation. These types of mechanism will need to be built upon in the new policy epoch where environmental sustainability and capacity planning take centre stage.

Evaluating the likelihood of the adoption of an animal welfare assessment system in European agri-food supply chains

Purpose – The purpose of this paper is to analyse the likelihood of adoption of a recently designed Welfare Assessment System in agri-food supply chains and the factors affecting the adoption decision. The application is carried out for pig and poultry chains. Design/methodology/approach – This research consisted of two main components: interviews with retailers in pig and poultry supply chains in eight different EU countries to explore their perceptions towards the adoption possibilities of the welfare assessment system; and a conjoint analysis designed to evaluate the perceived adoption likelihood of the assessment system by different Standards Formulating Organisations (SFOs). Findings – Stakeholders were found to be especially concerned about the costs of implementation of the system and how it could, or should, be merged with existing assurance schemes. Another conclusion of the study is that the presence of a strong third independent party supporting the implementation of the welfare assessment system would be the most important influence on the decision whether, or not, to adopt it. Originality/value – This research evaluates the adoption possibilities of a novel Welfare Assessment System and presents the views of different supply chain stakeholders on an adoption of such a system. The main factors affecting the adoption decision are identified and analysed. Contrary to expectations, the costs of adoption of a new welfare assessment system were not considered to be the most important factor affecting the decision of supply chain stakeholders about the adoption of this new welfare system.

The challenge of self-regulation in commercial property leasing: a study of lease codes in the UK.

Purpose – UK Government policy to address perceived market failure in commercial property leasing has largely been pursued through industry self-regulation. Yet, it is proving difficult to assess whether self-regulation on leasing has been a “success”, or even to determine how to evaluate this. The purpose of this paper is to provide a framework for this and a clearer understanding of self-regulation in commercial leasing. Design/methodology/approach – A literature review suggests key criteria to explain the (in)effectiveness of self-regulation. UK lease codes are analysed in the light of this literature, drawing on previous research carried out by the authors on the operation of these codes. Findings – Lease codes appear to be failing as an effective system of self-regulation. While there are influential market actors championing them, the fragmentation of the leasing process lessens this influence. The structures are not there to ensure implementation, monitor compliance and record views of affected stakeholders. Research limitations/implications – This work adds to the literature on self-regulation in general, and provides an insight into its operation in a previously unexplored industry. Research is needed into the experience of other countries in regulating the property industry by voluntary means. Social implications – There are institutional limitations to self-regulation within the property industry. This has implications for policy makers in considering the advantages and limitation of using a voluntary solution to achieve policy aims within the commercial leasing market. Originality/value – This paper provides a first step in considering the lease codes in the wider context of industry self-regulation and is relevant to policy makers and industry bodies.

Bells and whistles of convection parameterization

The present workshop constitutes the 5th in the annual series on “Concepts for Convective Parameterizations in Large-Scale Models”. The purpose of the workshop series has been to discuss the fundamental theoretical issues of convection parameterization with a small number of European scientists. The workshop series has been funded by European Cooperation in the Field of Scientific and Technical Research (COST) Action ES0905. The theme of the workshop for the year 2012 was decided from a main conclusion of the previous workshop, which focused on the convective organization problem, seeking a means for implementing such effects into convection parameterizations (Yano et al. 2012). As it turned out, in order to discuss this implementation issue in any concrete manner, we have first to know very well the bells and whistles of convection parameterizations. This was the purpose of the 5th workshop. The title of the workshop is rather metaphorically tagged as “Bulk or Spectrum?”, because this is a typical decision we have to face at the outset of any parameterization development. The following report discusses selected issues of bells and whistles addressed during the meeting.