Prediction of moisture, calorific value, ash and carbon content of two dedicated bioenergy crops using near-infrared spectroscopy

The potential of near infrared spectroscopy in conjunction with partial least squares regression to predict Miscanthus xgiganteus and short rotation coppice willow quality indices was examined. Moisture, calorific value, ash and carbon content were predicted with a root mean square error of cross validation of 0.90% (R2 = 0.99), 0.13 MJ/kg (R2 = 0.99), 0.42% (R2 = 0.58), and 0.57% (R2 = 0.88), respectively. The moisture and calorific value prediction models had excellent accuracy while the carbon and ash models were fair and poor, respectively. The results indicate that near infrared spectroscopy has the potential to predict quality indices of dedicated energy crops, however the models must be further validated on a wider range of samples prior to implementation. The utilization of such models would assist in the optimal use of the feedstock based on its biomass properties.

High hydrostatic pressure blanching of baby spinach (Spinacia oleracea L.)

Given the high susceptibility of baby spinach leaves to thermal processing, the use of high hydrostatic pressure (HHP) is explored as a non-thermal blanching method. The effects of HHP were compared with thermal blanching by following residual activity of polyphenol oxidases and peroxidases, colour retention, chlorophyll and carotenoids content, antioxidant capacity and total polyphenols content. Spinach subjected to 700 MPa at 20 ºC for 15 min represented the best treatment among the conditions studied due to its balanced effect on target enzymes and quality indices. The latter treatment reduced enzyme activities of polyphenol oxidases and peroxidases by 86.4 and 76.7 %, respectively. Furthermore, leaves did not present changes in colour and an increase by 13.6 % and 15.6 % was found in chlorophyll and carotenoids content, respectively; regarding phytochemical compounds, retentions of 28.2 % of antioxidant capacity and 77.1 % of polyphenols content were found. Results demonstrated that HHP (700 MPa) at room temperature, when compared with thermal treatments, presented better retention of polyphenols, not significantly different chlorophyll and carotenoids content and no perceptible differences in the instrumental colour evaluated through ΔE value; therefore, it can be considered a realistic practical alternative to the widely used thermal blanching.

On the use of headline indices to link environmental quality and income at the level of the nation state

This paper deconstructs the relationship between the Environmental Sustainability Index (ESI) and national income. The ESI attempts to provide a single figure which encapsulates environmental sustainability' for each country included in the analysis, and this allied with a 'league table' format so as to name and shame bad performers, has resulted in widespread reporting within the popular presses of a number of countries. In essence, the higher the value of the ESI then the more 'environmentally sustainable' a country is deemed to be. A logical progression beyond the use of the ESI to publicise environmental sustainability is its use within a more analytical context. Thus an index designed to simplify in order to have an impact on policy is used to try and understand causes of good and bad performance in environmental sustainability. For example the creators of the ESI claim that ESI is related to GDP/capita (adjusted for Purchasing Power Parity) such that the ESI increases linearly with wealth. While this may in a sense be a comforting picture, do the variables within the ESI allow for alternatives to the story, and if they do then what are the repercussions for those producing such indices for broad consumption amongst the policy makers, mangers, the press, etc.? The latter point is especially important given the appetite for such indices amongst non-specialists, and for all their weaknesses the ESI and other such aggregated indices will not go away. (C) 2007 Elsevier Ltd. All rights reserved.

A review of the potential impacts of climate change on surface water quality

It is now accepted that some human-induced climate change is unavoidable. Potential impacts on water supply have received much attention, but relatively little is known about the concomitant changes in water quality. Projected changes in air temperature and rainfall could affect river flows and, hence, the mobility and dilution of contaminants. Increased water temperatures will affect chemical reaction kinetics and, combined with deteriorations in quality, freshwater ecological status. With increased flows there will be changes in stream power and, hence, sediment loads with the potential to alter the morphology of rivers and the transfer of sediments to lakes, thereby impacting freshwater habitats in both lake and stream systems. This paper reviews such impacts through the lens of UK surface water quality. Widely accepted climate change scenarios suggest more frequent droughts in summer, as well as flash-flooding, leading to uncontrolled discharges from urban areas to receiving water courses and estuaries. Invasion by alien species is highly likely, as is migration of species within the UK adapting to changing temperatures and flow regimes. Lower flows, reduced velocities and, hence, higher water residence times in rivers and lakes will enhance the potential for toxic algal blooms and reduce dissolved oxygen levels. Upland streams could experience increased dissolved organic carbon and colour levels, requiring action at water treatment plants to prevent toxic by-products entering public water supplies. Storms that terminate drought periods will flush nutrients from urban and rural areas or generate acid pulses in acidified upland catchments. Policy responses to climate change, such as the growth of bio-fuels or emission controls, will further impact freshwater quality.

Biodiversity of Collembola in urban soils and the use of Folsomia candida to assess soil 'quality'

The effects of metal contamination on natural populations of Collembola in soils from five sites in the Wolverhampton area ( West Midlands, England) were examined. Analysis revealed that metal concentrations were elevated above background levels at all sites. One location in particular (Ladymoor, a former smelting site) was highly contaminated with Cd, Cu, Pb and Zn at more than 20 times background levels. Biodiversity indices ( Shannon - Weiner, Simpson index, Margalef index, alpha index, species richness, Shaneven ( evenness) and Berger - Parker dominance) were calculated. Of these indices, estimates of species richness and evenness were most effective at highlighting the differences between the Collembola communities. Indeed, the highest number of species were found at the most contaminated site, although the Collembola population also had a comparatively low evenness value, with just two species dominating. The number of individuals per species were allocated into geometric classes and plotted against the cumulative number of species as a percentage. At Ladymoor, there were more geometric classes, and the slope of the line was shallower than at the other four sites. This characteristic is a feature of polluted sites, where a few species are dominant and most species are rare. The Ladymoor soil also had a dominance of Isotomurus palustris, and was the only site in which Ceratophysella denticulata was found. Previous studies have shown that these two species are often found in sites subject to high metal contamination. Survival and reproduction of the "standard'' test springtail, Folsomia candida (Willem), were determined in a 4 week exposure test to soils from all five sites. Mortality was significantly increased in adults and reproduction significantly lower in the Ladymoor soil in comparison to the other four sites. This study has shown that severe metal contamination can be related to the population structure of Collembola in the field, and performance of F. candida ( in soils from such sites) in the laboratory.

GISQ, a multifunctional indicator of soil quality

We present here an indicator of soil quality that evaluates soil ecosystem services through a set of 5 subindicators, and further combines them into a single general Indicator of Soil Quality (GISQ). We used information derived from 54 properties commonly used to describe the multifaceted aspects of soil quality. The design and calculation of the indicators were based on sequences of multivariate analyses. Subindicators evaluated the physical quality, chemical fertility, organic matter stocks, aggregation and morphology of the upper 5 cm of soil and the biodiversity of soil macrofauna. A GISQ combined the different subindicators providing a global assessment of soil quality. Research was conducted in two hillside regions of Colombia and Nicaragua, with similar types of land use and socio-economic context. However, soil and climatic conditions differed significantly. In Nicaragua, soil quality was assessed at 61 points regularly distributed 200 m apart on a regular grid across the landscape. In Colombia, 8 plots representing different types of land use were arbitrarily chosen in the landscape and intensively sampled. Indicators that were designed in the Nicaragua site were further applied to the Colombian site to test for their applicability. In Nicaragua, coffee plantations, fallows, pastures and forest had the highest values of GISQ (1.00; 0.80; 0.78 and 0.77, respectively) while maize crops and eroded soils (0.19 and 0.10) had the lowest values. Examination of subindicator values allowed the separate evaluation of different aspects of soil quality: subindicators of organic matter, aggregation and morphology and biodiversity of macrofauna had the maximum values in coffee plantations (0.89; 0.72 and 0.56, respectively on average) while eroded soils had the lowest values for these indicators (0.10; 0.31 and 0.33, respectively). Indicator formulae derived from information gained at the Nicaraguan sites were not applicable to the Colombian situation and site-specific constants were calculated. This indicator allows the evaluation of soil quality and facilitates the identification of problem areas through the individual values of each subindicator. It allows monitoring of change through time and can guide the implementation of soil restoration technologies. Although GISQ formulae computed on a set of data were only valid at a regional scale, the methodology used to create these indices can be applied everywhere.

Biodiversity of Collembola in urban soils and the use of Folsomia candida to assess soil 'quality'

The effects of metal contamination on natural populations of Collembola in soils from five sites in the Wolverhampton area ( West Midlands, England) were examined. Analysis revealed that metal concentrations were elevated above background levels at all sites. One location in particular (Ladymoor, a former smelting site) was highly contaminated with Cd, Cu, Pb and Zn at more than 20 times background levels. Biodiversity indices ( Shannon - Weiner, Simpson index, Margalef index, alpha index, species richness, Shaneven ( evenness) and Berger - Parker dominance) were calculated. Of these indices, estimates of species richness and evenness were most effective at highlighting the differences between the Collembola communities. Indeed, the highest number of species were found at the most contaminated site, although the Collembola population also had a comparatively low evenness value, with just two species dominating. The number of individuals per species were allocated into geometric classes and plotted against the cumulative number of species as a percentage. At Ladymoor, there were more geometric classes, and the slope of the line was shallower than at the other four sites. This characteristic is a feature of polluted sites, where a few species are dominant and most species are rare. The Ladymoor soil also had a dominance of Isotomurus palustris, and was the only site in which Ceratophysella denticulata was found. Previous studies have shown that these two species are often found in sites subject to high metal contamination. Survival and reproduction of the "standard'' test springtail, Folsomia candida (Willem), were determined in a 4 week exposure test to soils from all five sites. Mortality was significantly increased in adults and reproduction significantly lower in the Ladymoor soil in comparison to the other four sites. This study has shown that severe metal contamination can be related to the population structure of Collembola in the field, and performance of F. candida ( in soils from such sites) in the laboratory.

Military doctrine, command philosophy and the generation of fighting power: genesis and theory

Military doctrine is one of the conceptual components of war. Its raison d’être is that of a force multiplier. It enables a smaller force to take on and defeat a larger force in battle. This article’s departure point is the aphorism of Sir Julian Corbett, who described doctrine as ‘the soul of warfare’. The second dimension to creating a force multiplier effect is forging doctrine with an appropriate command philosophy. The challenge for commanders is how, in unique circumstances, to formulate, disseminate and apply an appropriate doctrine and combine it with a relevant command philosophy. This can only be achieved by policy-makers and senior commanders successfully answering the Clausewitzian question: what kind of conflict are they involved in? Once an answer has been provided, a synthesis of these two factors can be developed and applied. Doctrine has implications for all three levels of war. Tactically, doctrine does two things: first, it helps to create a tempo of operations; second, it develops a transitory quality that will produce operational effect, and ultimately facilitate the pursuit of strategic objectives. Its function is to provide both training and instruction. At the operational level instruction and understanding are critical functions. Third, at the strategic level it provides understanding and direction. Using John Gooch’s six components of doctrine, it will be argued that there is a lacunae in the theory of doctrine as these components can manifest themselves in very different ways at the three levels of war. They can in turn affect the transitory quality of tactical operations. Doctrine is pivotal to success in war. Without doctrine and the appropriate command philosophy military operations cannot be successfully concluded against an active and determined foe.

The power of purchase: addressing sustainability through public procurement

This article focuses on sustainable development and public procurement and reflects on the significance of questioning the goals sustainable public procurement seeks to achieve. While it is recognised that developing appropriate legal frameworks and regulatory tools for environmental, social and economic quality assurance is important, achieving sustainable procurement nevertheless remains political. With the forthcoming adoption of new European Union Public Procurement Directives, the article provides a timely reminder that for sustainability to be integral to good procurement, the power of purchase must capture a paradigmatic shift from doing things better to doing better things.

Explicit and implicit subject bias in the ABS journal quality guide

This paper addresses issues raised in two recent papers published in this journal about the UK Association of Business Schools' Journal Quality Guide (ABS Guide). While much of the debate about journal rankings in general, and the ABS Guide in particular, has focused on the construction, power and (mis)use of these rankings, this paper differs in that it explains and provides evidence about explicit and implicit biases in the ABS Guide. In so doing, it poses potentially difficult questions that the editors of the ABS Guide need to address and urgently rectify if the ABS Guide seeks to build and retain legitimacy. In particular, the evidence in this paper shows explicit bias in the ABS Guide against several subject areas, including accounting and finance. It also shows implicit bias against accounting and finance when comparing journal rankings in sub-areas shared between accounting and finance and the broader business management subject areas.

The power of perceptions: exploring the role of urban design in cycling behaviours and healthy ageing

Good urban design has the power to aid in the provision of inclusive journey environments, yet traditionally neglects the perspective of the cyclist. This paper starts from the premise that more can be done to understand and articulate cyclists’ experiences and perceptions of the urban environment in which they cycle, as part of a closer linking of urban design qualities with transport planning and infrastructure interventions. This approach is particularly applicable in relation to older cyclists, a group whose needs are often poorly understood and for whom perceptions can significantly influence mobile behaviours. Currently, knowledge regarding the relationship between the built environment and physical activity, including cycling, in older adults is limited. As European countries face up to the challenges associated with ageing populations, some metropolitan regions, such as Munich, Germany, are making inroads into widening cycling’s appeal across generations through a combination of urban design, policy and infrastructure initiatives. The paper provides a systematic understanding of the urban design qualities and built environment features that affect cycling participation and have the potential to contribute towards healthy ageing. Urban design features such as legibility, aesthetics, scale and open space have been shown to influence and affect other mobile behaviours (e.g. walking), but their role as a mediator in cycle behaviour remains under-explored. Many of these design ‘qualities’ are related to individual perceptions; capturing these can help build a picture of quality in the built environment that includes an individual’s relationship with their local neighbourhood and its influences on their mobility choices. Issues of accessibility, facilities, and safety in cycling remain crucial, and, when allied to these design ‘qualities‘, provides a more rounded reflection of everyday journeys and trips taken or desired. The paper sets out the role that urban design might play in mediating these critical mobility issues, and in particular, in better understanding the ‘quality of the journey’. It concludes by highlighting the need for designers, policy makers, planners and academics to consider the role that design can play in encouraging cycle participation, especially as part of a healthy ageing agenda.

Effect of blending Jersey and Holstein-Friesian milk on Cheddar cheese processing, composition and quality

The aim of this study was to investigate the effects of numerous milk compositional factors on milk coagulation properties using Partial Least Squares (PLS). Milk from herds of Jersey and Holstein- Friesian cattle was collected across the year and blended (n=55), to maximise variation in composition and coagulation. The milk was analysed for casein, protein, fat, titratable acidity, lactose, Ca2+, urea content, micelles size, fat globule size, somatic cell count and pH. Milk coagulation properties were defined as coagulation time, curd firmness and curd firmness rate measured by a controlled strain rheometer. The models derived from PLS had higher predictive power than previous models demonstrating the value of measuring more milk components. In addition to the well-established relationships with casein and protein levels, CMS and fat globule size were found to have as strong impact on all of the three models. The study also found a positive impact of fat on milk coagulation properties and a strong relationship between lactose and curd firmness, and urea and curd firmness rate, all of which warrant further investigation due to current lack of knowledge of the underlying mechanism. These findings demonstrate the importance of using a wider range of milk compositional variables for the prediction of the milk coagulation properties, and hence as indicators of milk suitability for cheese making.

Functional identity and diversity of animals predict ecosystem functioning better than species-based indices

Drastic biodiversity declines have raised concerns about the deterioration of ecosystem functions and have motivated much recent research on the relationship between species diversity and ecosystem functioning. A functional trait framework has been proposed to improve the mechanistic understanding of this relationship, but this has rarely been tested for organisms other than plants. We analysed eight datasets, including five animal groups, to examine how well a trait-based approach, compared with a more traditional taxonomic approach, predicts seven ecosystem functions below- and above-ground. Trait-based indices consistently provided greater explanatory power than species richness or abundance. The frequency distributions of single or multiple traits in the community were the best predictors of ecosystem functioning. This implies that the ecosystem functions we investigated were underpinned by the combination of trait identities (i.e. single-trait indices) and trait complementarity (i.e. multi-trait indices) in the communities. Our study provides new insights into the general mechanisms that link biodiversity to ecosystem functioning in natural animal communities and suggests that the observed responses were due to the identity and dominance patterns of the trait composition rather than the number or abundance of species per se.

Argo real-time quality control intercomparison

The real-time quality control (RTQC) methods applied to Argo profiling float data by the United Kingdom (UK) Met Office, the United States (US) Fleet Numerical Meteorology and Oceanography Centre, the Australian Bureau of Meteorology and the Coriolis Centre are compared and contrasted. Data are taken from the period 2007 to 2011 inclusive and RTQC performance is assessed with respect to Argo delayed-mode quality control (DMQC). An intercomparison of RTQC techniques is performed using a common data set of profiles from 2010 and 2011. The RTQC systems are found to have similar power in identifying faulty Argo profiles but to vary widely in the number of good profiles incorrectly rejected. The efficacy of individual QC tests are inferred from the results of the intercomparison. Techniques to increase QC performance are discussed.