Multilayered hydrogel coatings covalently-linked to glass surfaces showing a potential to mimic mucosal tissues

Multilayered hydrogel coatings can be developed on the surface of glass slides via layer-by-layer deposition of hydrogen-bonded interpolymer complexes formed by poly(acrylic acid) and methylcellulose. Chemical modification of the glass surface with (3-aminopropyl)triethoxysilane with subsequent layer-by-layer deposition and cross-linking of interpolymer complexes by thermal treatment allows fabrication of ultrathin hydrogel coatings, not detachable from the substrate. The thickness of these coatings is directly related to the number of deposition cycles and cross-linking conditions. An unusual dependence of the hydrogel swelling properties on the sample thickness is observed and can be interpreted by gradual transitions between two- and three-dimensional networks. The hydrogels exhibit pH-responsive swelling behaviour, achieving higher swelling degrees at pH > 6.0. These coatings can be used as model substrates to study the adhesive properties of pharmaceutical tablets and can potentially mimic the total work of adhesion observed for the detachment of mucoadhesives from porcine buccal mucosa but fail to exhibit identical detachment profiles.

Solvent Effects on the Formation of Nanoparticles and Multilayered Coatings Based on Hydrogen-Bonded Interpolymer Complexes of Poly(acrylic acid) with Homo- and Copolymers of N-Vinyl Pyrrolidone

The formation of hydrogen-bonded interpolymer complexes between poly(acrylic acid) and poly(N-vinyl pyrrolidone) as well as amphiphilic copolymers of N-vinyl pyrrolidone with vinyl propyl ether has been studied in aqueous and organic solutions. It was demonstrated that introduction of vinyl propyl ether units into the macromolecules of the nonionic polymer enhances their ability to form complexes in aqueous solutions due to more significant contribution of hydrophobic effects. The complexation was found to be a multistage process that involves the formation of primary polycomplex particles, which further aggregate to form spherical nanoparticles. Depending on the environmental factors (pH, solvent nature), these nanoparticles may either form stable colloidal solutions or undergo further aggregation, resulting in precipitation of interpolymer complexes. In organic solvents, the intensity of complex formation increases in the following order: methanol < ethanol < isopropanol < dioxane. The multilayered coatings were developed using layer-by-layer deposition of interpolymer complexes on glass surfaces. It was demonstrated that the solvent nature affects the efficiency of coating deposition.

pH-mediated interactions between poly(acrylic acid) and methylcellulose in the formation of ultrathin multilayered hydrogels and spherical nanoparticles

Poly(acrylic acid) forms insoluble hydrogen-bonded interpolymer complexes with methylcellulose in aqueous solutions under acidic conditions. In this work the reaction heats and binding constants were determined for the complexation between poly(acrylic acid) and methylcellulose by isothermal titration calorimetry at different pH and findings are correlated with the aggregation processes occurring in this system. The principal contribution to the complexation heat results from primary polycomplex particle aggregation. Transmission electron microscopy of nanoparticles produced at pH 1.4 and 2.4 demonstrated that they are spherical and dense structures. The nanoparticles ranged from 80 to 200 nm, whereas particles formed at pH 3.2 were 20-30 nm and were stabilized against aggregation by a network of uncomplexed macromolecules. For the first time, multilayered materials were developed on the basis of hydrogen-bonded complexes of poly(acrylic acid) and methylcellulose using layer-by-layer deposition on a glass surface. The thickness of these films was a linear function of the number of deposition cycles. The materials were subsequently cross-linked by thermal treatment, resulting in ultrathin hydrogels which detached from the glass substrate upon swelling. The swelling capacity of ultrathin hydrogels differed from the swelling of the thicker films of a similar chemical composition.

A comparative study of multilayered and single layered neural network based predictive controllers

The authors compare the performance of two types of controllers one based on the multilayered network and the other based on the single layered CMAC network (cerebellar model articulator controller). The neurons (information processing units) in the multi-layered network use Gaussian activation functions. The control scheme which is considered is a predictive control algorithm, along the lines used by Willis et al. (1991), Kambhampati and Warwick (1991). The process selected as a test bed is a continuous stirred tank reactor. The reaction taking place is an irreversible exothermic reaction in a constant volume reactor cooled by a single coolant stream. This reactor is a simplified version of the first tank in the two tank system given by Henson and Seborg (1989).

Hydrogen-bonding-driven self-assembly of PEGylated organosilica nanoparticles with poly(acrylic acid) in aqueous solutions and in layer-by-layer deposition at solid surfaces

PEGylated organosilica nanoparticles have been synthesized through self-condensation of (3-mercaptopropyl)trimethoxysilane in dimethyl sulfoxide into thiolated nanoparticles with their subsequent reaction with methoxypoly(ethylene glycol) maleimide. The PEGylated nanoparticles showed excellent colloidal stability over a wide range of pH in contrast to the parent thiolated nanoparticles, which have a tendency to aggregate irreversibly under acidic conditions (pH < 3.0). Due to the presence of a poly(ethylene glycol)-based corona, the PEGylated nanoparticles are capable of forming hydrogen-bonded interpolymer complexes with poly(acrylic acid) in aqueous solutions under acidic conditions, resulting in larger aggregates. The use of hydrogen-bonding interactions allows more efficient attachment of the nanoparticles to surfaces. The alternating deposition of PEGylated nanoparticles and poly(acrylic acid) on silicon wafer surfaces in a layer-by-layer fashion leads to multilayered coatings. The self-assembly of PEGylated nanoparticles with poly(acrylic acid) in aqueous solutions and at solid surfaces was compared to the behavior of linear poly(ethylene glycol). The nanoparticle system creates thicker layers than the poly(ethylene glycol), and a thicker layer is obtained on a poly(acrylic acid) surface than on a silica surface, because of the effects of hydrogen bonding. Some implications of these hydrogen-bonding-driven interactions between PEGylated nanoparticles and poly(acrylic acid) for pharmaceutical formulations are discussed.

Optimizing layer-by-layer deposition of interpolymer complexes on solid substrates using Biacore

The layer-by-layer deposition of polymers onto surfaces allows the fabrication of multilayered materials for a wide range of applications, from drug delivery to biosensors. This work describes the analysis of complex formation between poly(acrylic acid) and methylcellulose in aqueous solutions using Biacore, a surface plasmon resonance analytical technique, traditionally used to examine biological interactions. This technique characterized the layer-by-layer deposition of these polymers on the surface of a Biacore sensor chip. The results were subsequently used to optimize the experimental conditions for sequential layer deposition on glass slides. The role of the solution pH and poly(acrylic acid) molecular weight on the formation of interpolymer multilayered coatings was researched, and showed that the optimal deposition of the polymer complexes was achieved at pHs ≤2.5 with a poly(acrylic acid) molecular weight of 450 kDa.

Amphoteric nano-, micro-, and macrogels, membranes, and thin films

This review describes the state-of the-art of nano-, micro- and macrogels, membranes, micro- and nanocapsules, as well as multilayered thin films exhibiting amphoteric character. The synthetic strategies and physicochemical properties of amphoteric materials are outlined in light of the stimuli-responsive behavior and their potential application in nanotechnology, biotechnology and medicine.

Adapting Jules Verne for the baby-boom generation: Hachette and the Bibliothèque Verte, c.1956-1966

How do changing notions of children’s reading practices alter or even create classic texts? This article looks at how the nineteenth-century author Jules Verne (1828-1905) was modernised by Hachette for their Bibliothèque Verte children’s collection in the 1950s and 60s. Using the methodology of adaptation studies, the article reads the abridged texts in the context of the concerns that emerged in postwar France about what children were reading. It examines how these concerns shaped editorial policy, and the transformations that Verne’s texts underwent before they were considered suitable for the children of the baby-boom generation. It asks whether these adapted versions damaged Verne’s reputation, as many literary scholars have suggested, or if the process of dividing his readership into children and adults actually helped to reinforce the new idea of his texts as complex and multilayered. In so doing, this article provides new insights into the impact of postwar reforms on children’s publishing and explores the complex interplay between abridgment, censorship, children’s literature and the adult canon.

CSR: the co-evolution of grocery multiples in the UK (2005-2010)

Purpose – The purpose of this paper is to investigate if CSR is balanced between firm and wider society interests. Design/methodology/approach – A qualitative interpretive hermeneutic approach is used to analyse a variety of publically published secondary sources on the CSR of Tesco, Sainsburys, Morrisons and Co-operative in the UK grocery multiple sector (2005-2010). Findings – CSR strategic outcomes currently favour the firm more than society interests. A multilayered framework in the form of Social Responsibility of the Corporation (SRC) is designed and offered in support of balancing the business-society relationship more evenly. Research limitations/implications – This study is limited to firms originating from within the UK grocery multiple sector. Asda could not be included in the study as it does not publish CSR reports annually in the UK after becoming part of Walmart group. Practical implications – A framework for multi-level standardised definition of CSR in the form of SRC is offered. The inclusion of employees and members of the public on CSR/SRC boards is recommended to foster wider collaboration. The SRC framework promotes standardisation at global level while respecting diversity and firm heterogeneity at firm level. The findings may further contribute to GRI; UN Global Compact; WEF dialogues. Social implications – Recommendations are made to extend CSR board diversity for improved dialogue with communities. The SRC framework may be applied at global; national; industry and firm level. The framework can be applied internationally or locally. Future studies may offer quantitative attributes for balancing CSR/SRC. Originality/value – A globally unique and universally applicable framework for evaluating CSR activities is proposed. Future studies may extend the authors' framework to other industries, national environments or globally in the pursuit of balance between firm and society. Furthermore, firms may also adopt the framework to support CSR activities.

Back to the future: implications for the field of HRM of the multistakeholder perspective proposed 30 years ago

Thirty years on from the seminal works on human resource management (HRM) by Beer et al., we examine how the subject has developed. We offer a normative review, based on that model and critique the assumption that the business of HRM is solely to improve returns to owners and shareholders. We identify the importance of a wider view of stakeholders to practitioners and how academic studies on the periphery of HRM are beginning to adopt such a view. We argue that the HRM studies so far have given us much valuable learning but that the subject has now reached a point where we need to take a wider, more contextual, more multilayered approach founded on the long-term needs of all relevant stakeholders. The original Beer et al. model remains a valuable guide to the next 30 years of HRM.