Integration of chaos theory and mathematical models in building simulation: Part I: Literature review

Current mathematical models in building research have been limited in most studies to linear dynamics systems. A literature review of past studies investigating chaos theory approaches in building simulation models suggests that as a basis chaos model is valid and can handle the increasingly complexity of building systems that have dynamic interactions among all the distributed and hierarchical systems on the one hand, and the environment and occupants on the other. The review also identifies the paucity of literature and the need for a suitable methodology of linking chaos theory to mathematical models in building design and management studies. This study is broadly divided into two parts and presented in two companion papers. Part (I) reviews the current state of the chaos theory models as a starting point for establishing theories that can be effectively applied to building simulation models. Part (II) develops conceptual frameworks that approach current model methodologies from the theoretical perspective provided by chaos theory, with a focus on the key concepts and their potential to help to better understand the nonlinear dynamic nature of built environment systems. Case studies are also presented which demonstrate the potential usefulness of chaos theory driven models in a wide variety of leading areas of building research. This study distills the fundamental properties and the most relevant characteristics of chaos theory essential to building simulation scientists, initiates a dialogue and builds bridges between scientists and engineers, and stimulates future research about a wide range of issues on building environmental systems.

Integration of chaos theory and mathematical models in building simulation: Part II: Conceptual frameworks

Current mathematical models in building research have been limited in most studies to linear dynamics systems. A literature review of past studies investigating chaos theory approaches in building simulation models suggests that as a basis chaos model is valid and can handle the increasing complexity of building systems that have dynamic interactions among all the distributed and hierarchical systems on the one hand, and the environment and occupants on the other. The review also identifies the paucity of literature and the need for a suitable methodology of linking chaos theory to mathematical models in building design and management studies. This study is broadly divided into two parts and presented in two companion papers. Part (I), published in the previous issue, reviews the current state of the chaos theory models as a starting point for establishing theories that can be effectively applied to building simulation models. Part (II) develop conceptual frameworks that approach current model methodologies from the theoretical perspective provided by chaos theory, with a focus on the key concepts and their potential to help to better understand the nonlinear dynamic nature of built environment systems. Case studies are also presented which demonstrate the potential usefulness of chaos theory driven models in a wide variety of leading areas of building research. This study distills the fundamental properties and the most relevant characteristics of chaos theory essential to (1) building simulation scientists and designers (2) initiating a dialogue between scientists and engineers, and (3) stimulating future research on a wide range of issues involved in designing and managing building environmental systems.

Antecedents of attitude and intention towards counterfeit symbolic and experiential products

This paper investigates the impact of price consciousness, perceived risk, and ethical obligation on attitude and intention towards counterfeit products. Data were collected from a sample of 200 respondents via an online questionnaire. A conceptual model was derived and tested via structural equation modelling in the contexts of symbolic and experiential counterfeit products. Findings show differences in the factors (and weight thereof) impacting attitude and purchase intention in the two product contexts. Specifically, ethical obligation and perceived risk are found to be significant predictors of attitude towards both symbolic and counterfeit products, while price consciousness is found to predict only attitude towards experiential products, but not purchase intention in either counterfeit product context.

The contributions of domain-general and numerical factors to third-grade arithmetic skills and mathematical learning disability

Explanations of the marked individual differences in elementary school mathematical achievement and mathematical learning disability (MLD or dyscalculia) have involved domain-general factors (working memory, reasoning, processing speed and oral language) and numerical factors that include single-digit processing efficiency and multi-digit skills such as number system knowledge and estimation. This study of third graders (N = 258) finds both domain-general and numerical factors contribute independently to explaining variation in three significant arithmetic skills: basic calculation fluency, written multi-digit computation, and arithmetic word problems. Estimation accuracy and number system knowledge show the strongest associations with every skill and their contributions are both independent of each other and other factors. Different domain-general factors independently account for variation in each skill. Numeral comparison, a single digit processing skill, uniquely accounts for variation in basic calculation. Subsamples of children with MLD (at or below 10th percentile, n = 29) are compared with low achievement (LA, 11th to 25th percentiles, n = 42) and typical achievement (above 25th percentile, n = 187). Examination of these and subsets with persistent difficulties supports a multiple deficits view of number difficulties: most children with number difficulties exhibit deficits in both domain-general and numerical factors. The only factor deficit common to all persistent MLD children is in multi-digit skills. These findings indicate that many factors matter but multi-digit skills matter most in third grade mathematical achievement.

Self-construals, Symbolic and Hedonic Preferences, and Actual Purchase Behavior

The study explores the influence of the independent and interdependent self-construals on actual purchase behavior and the mediating role of consumer preferences for symbolic and hedonic meanings. Data were collected through a survey of about 1,000 respondents. Results indicate that independent consumers draw on the self/hedonic- and status-symbolic resources of clothing in the construction and expression of their identities. Regarding the interdependent consumers, they show no interest in clothing affiliation and status symbolism. The degree of preference for status-symbolic meaning mediates all effects of the independent and interdependent self-construals on actual purchase behavior; self-expressive/hedonic preferences mediate two of the three effects of the independent self on actual purchase behavior when accounting for suppression effects, whereas the expected mediation of preference for affiliation meaning is not supported.

Application of the entropy technique and genetic algorithms to construction site layout planning of medium-size projects

Genetic algorithms (GAs) have been introduced into site layout planning as reported in a number of studies. In these studies, the objective functions were defined so as to employ the GAs in searching for the optimal site layout. However, few studies have been carried out to investigate the actual closeness of relationships between site facilities; it is these relationships that ultimately govern the site layout. This study has determined that the underlying factors of site layout planning for medium-size projects include work flow, personnel flow, safety and environment, and personal preferences. By finding the weightings on these factors and the corresponding closeness indices between each facility, a closeness relationship has been deduced. Two contemporary mathematical approaches - fuzzy logic theory and an entropy measure - were adopted in finding these results in order to minimize the uncertainty and vagueness of the collected data and improve the quality of the information. GAs were then applied to searching for the optimal site layout in a medium-size government project using the GeneHunter software. The objective function involved minimizing the total travel distance. An optimal layout was obtained within a short time. This reveals that the application of GA to site layout planning is highly promising and efficient.

Assessing the discourses and practices of urban regeneration in a growing region

Most research on the discourses and practices of urban regeneration in-the UK has examined case studies located in areas of relative socio-economic distress. Less research has been undertaken on regeneration projects and agendas in areas characterise by strong economic growth. Yet, it is in such places that some of the best examples of the discourses, practices and impacts of contemporary urban regeneration can be. found. In some areas of high demand regeneration projects have used inner urban brownfield sites as locations for new investment. With the New Labour government's urban policy agendas targeting similar forms of regeneration, an examination of completed or on-going schemes is timely and relevant to debates over the direction that policy should take. This paper, drawing on a study of urban regeneration in one of England's, fastest growing towns, Reading in Berkshire, examines the discourses, practices and impacts of redevelopment schemes during the 1990s and 2000s. Reading's experiences have received national attention and have been hailed as a model for other urban areas to follow. The research documents the discursive and concrete aspects of local regeneration and examines the ways in which specific priorities and defined problems have come to dominate agendas. Collectively, the study argues that market-driven objectives come to dominate regeneration agendas, even in areas of strong demand where development agencies wield a relatively high degree of influence. Such regeneration plays a symbolic and practical role in creating new forms of exclusion and interpretations of place. (C) 2003 Elsevier Science Ltd. All rights reserved.

Predicting the profile of nutrients available for absorption: from nutrient requirement to animal response and environmental impact

Current feed evaluation systems for dairy cattle aim to match nutrient requirements with nutrient intake at pre-defined production levels. These systems were not developed to address, and are not suitable to predict, the responses to dietary changes in terms of production level and product composition, excretion of nutrients to the environment, and nutrition related disorders. The change from a requirement to a response system to meet the needs of various stakeholders requires prediction of the profile of absorbed nutrients and its subsequent utilisation for various purposes. This contribution examines the challenges to predicting the profile of nutrients available for absorption in dairy cattle and provides guidelines for further improved prediction with regard to animal production responses and environmental pollution. The profile of nutrients available for absorption comprises volatile fatty acids, long-chain fatty acids, amino acids and glucose. Thus the importance of processes in the reticulo-rumen is obvious. Much research into rumen fermentation is aimed at determination of substrate degradation rates. Quantitative knowledge on rates of passage of nutrients out of the rumen is rather limited compared with that on degradation rates, and thus should be an important theme in future research. Current systems largely ignore microbial metabolic variation, and extant mechanistic models of rumen fermentation give only limited attention to explicit representation of microbial metabolic activity. Recent molecular techniques indicate that knowledge on the presence and activity of various microbial species is far from complete. Such techniques may give a wealth of information, but to include such findings in systems predicting the nutrient profile requires close collaboration between molecular scientists and mathematical modellers on interpreting and evaluating quantitative data. Protozoal metabolism is of particular interest here given the paucity of quantitative data. Empirical models lack the biological basis necessary to evaluate mitigation strategies to reduce excretion of waste, including nitrogen, phosphorus and methane. Such models may have little predictive value when comparing various feeding strategies. Examples include the Intergovernmental Panel on Climate Change (IPCC) Tier II models to quantify methane emissions and current protein evaluation systems to evaluate low protein diets to reduce nitrogen losses to the environment. Nutrient based mechanistic models can address such issues. Since environmental issues generally attract more funding from governmental offices, further development of nutrient based models may well take place within an environmental framework.

Did pterosaurs feed by skimming? Physical modelling and anatomical evaluation of an unusual feeding method

Similarities between the anatomies of living organisms are often used to draw conclusions regarding the ecology and behaviour of extinct animals. Several pterosaur taxa are postulated to have been skim-feeders based largely on supposed convergences of their jaw anatomy with that of the modern skimming bird, Rynchops spp. Using physical and mathematical models of Rynchops bills and pterosaur jaws, we show that skimming is considerably more energetically costly than previously thought for Rynchops and that pterosaurs weighing more than one kilogram would not have been able to skim at all. Furthermore, anatomical comparisons between the highly specialised skull of Rynchops and those of postulated skimming pterosaurs suggest that even smaller forms were poorly adapted for skim-feeding. Our results refute the hypothesis that some pterosaurs commonly used skimming as a foraging method and illustrate the pitfalls involved in extrapolating from limited morphological convergence.

Did pterosaurs feed by skimming? Physical modelling and anatomical evaluation of an unusual feeding method

Similarities between the anatomies of living organisms are often used to draw conclusions regarding the ecology and behaviour of extinct animals. Several pterosaur taxa are postulated to have been skim-feeders based largely on supposed convergences of their jaw anatomy with that of the modern skimming bird, Rynchops spp. Using physical and mathematical models of Rynchops bills and pterosaur jaws, we show that skimming is considerably more energetically costly than previously thought for Rynchops and that pterosaurs weighing more than one kilogram would not have been able to skim at all. Furthermore, anatomical comparisons between the highly specialised skull of Rynchops and those of postulated skimming pterosaurs suggest that even smaller forms were poorly adapted for skim-feeding. Our results refute the hypothesis that some pterosaurs commonly used skimming as a foraging method and illustrate the pitfalls involved in extrapolating from limited morphological convergence.

Robot free will

We introduce the perspex machine which unifies projective geometry and Turing computation and results in a supra-Turing machine. We show two ways in which the perspex machine unifies symbolic and non-symbolic AI. Firstly, we describe concrete geometrical models that map perspexes onto neural networks, some of which perform only symbolic operations. Secondly, we describe an abstract continuum of perspex logics that includes both symbolic logics and a new class of continuous logics. We argue that an axiom in symbolic logic can be the conclusion of a perspex theorem. That is, the atoms of symbolic logic can be the conclusions of sub-atomic theorems. We argue that perspex space can be mapped onto the spacetime of the universe we inhabit. This allows us to discuss how a robot might be conscious, feel, and have free will in a deterministic, or semi-deterministic, universe. We ground the reality of our universe in existence. On a theistic point, we argue that preordination and free will are compatible. On a theological point, we argue that it is not heretical for us to give robots free will. Finally, we give a pragmatic warning as to the double-edged risks of creating robots that do, or alternatively do not, have free will.

Emotions and the habitus: Young people with socio-emotional differences (re)producing social, emotional and cultural capital in family and leisure space-times

In this paper we explore the importance of emotionally inter-dependent relationships to the functioning of embodied social capital and habitus. Drawing upon the experiences of young people with socio-emotional differences, we demonstrate how emotionally inter-dependent and relatively nurturing relationships are integral to the acquisition of social capital and to the co-construction and embodiment of habitus. The young people presented in this paper often had difficulties in forging social relationships and in acquiring symbolic and cultural capital in school spaces. However, we outline how these young people (re)produce and embody alternative kinds of habitus, based on emotionally reciprocal relationships forged through formal and informal leisure activities and familial and fraternal social relationships. These alternative forms of habitus provide sites of subjection, scope for acquiring social and cultural capital and a positive sense of identity in the face of problematic relations and experiences in school spaces.

On competitive bidding: scoring and position probability graphs

Iso-score curves graph (iSCG) and mathematical relationships between Scoring Parameters (SP) and Forecasting Parameters (FP) can be used in Economic Scoring Formulas (ESF) used in tendering to distribute the score among bidders in the economic part of a proposal. Each contracting authority must set an ESF when publishing tender specifications and the strategy of each bidder will differ depending on the ESF selected and the weight of the overall proposal scoring. The various mathematical relationships and density distributions that describe the main SPs and FPs, and the representation of tendering data by means of iSCGs, enable the generation of two new types of graphs that can be very useful for bidders who want to be more competitive: the scoring and position probability graphs.