8 resultados para Industrial Material Exchange Service.
em CentAUR: Central Archive University of Reading - UK
Resumo:
1. Closed Ecological Systems (CES) are small manmade ecosystems which do not have any material exchange with the surrounding environment. Recent ecological and technological advances enable successful establishment and maintenance of CES, making them a suitable tool for detecting and measuring subtle feedbacks and mechanisms. 2. As a part of an analogue (physical) C cycle modelling experiment, we developed a non-intrusive methodology to control the internal environment and to monitor atmospheric CO2 concentration inside 16 replicated CES. Whilst maintaining an air-tight seal of all CES, this approach allowed for access to the CO2 measuring equipment for periodic re-calibration and repairs. 3. To ensure reliable cross-comparison of CO2 observations between individual CES units and to minimise the cost of the system, only one CO2 sampling unit was used. An ADC BioScientific OP-2 (open-path) analyser mounted on a swinging arm was passing over a set of 16 measuring cells. Each cell was connected to an individual CES with air continuously circulating between them. 4. Using this setup, we were able to continuously measure several environmental variables and CO2 concentration within each closed system, allowing us to study minute effects of changing temperature on C fluxes within each CES. The CES and the measuring cells showed minimal air leakage during an experimental run lasting, on average, 3 months. The CO2 analyser assembly performed reliably for over 2 years, however an early iteration of the present design proved to be sensitive to positioning errors. 5. We indicate how the methodology can be further improved and suggest possible avenues where future CES based research could be applied.
Resumo:
Diffuse reflectance spectroscopy (DRS) is increasingly being used to predict numerous soil physical, chemical and biochemical properties. However, soil properties and processes vary at different scales and, as a result, relationships between soil properties often depend on scale. In this paper we report on how the relationship between one such property, cation exchange capacity (CEC), and the DRS of the soil depends on spatial scale. We show this by means of a nested analysis of covariance of soils sampled on a balanced nested design in a 16 km × 16 km area in eastern England. We used principal components analysis on the DRS to obtain a reduced number of variables while retaining key variation. The first principal component accounted for 99.8% of the total variance, the second for 0.14%. Nested analysis of the variation in the CEC and the two principal components showed that the substantial variance components are at the > 2000-m scale. This is probably the result of differences in soil composition due to parent material. We then developed a model to predict CEC from the DRS and used partial least squares (PLS) regression do to so. Leave-one-out cross-validation results suggested a reasonable predictive capability (R2 = 0.71 and RMSE = 0.048 molc kg− 1). However, the results from the independent validation were not as good, with R2 = 0.27, RMSE = 0.056 molc kg− 1 and an overall correlation of 0.52. This would indicate that DRS may not be useful for predictions of CEC. When we applied the analysis of covariance between predicted and observed we found significant scale-dependent correlations at scales of 50 and 500 m (0.82 and 0.73 respectively). DRS measurements can therefore be useful to predict CEC if predictions are required, for example, at the field scale (50 m). This study illustrates that the relationship between DRS and soil properties is scale-dependent and that this scale dependency has important consequences for prediction of soil properties from DRS data
Resumo:
In recent years there has been an increasing awareness of the radiological impact of non-nuclear industries that extract and/or process ores and minerals containing naturally occurring radioactive material (NORM). These industrial activities may result in significant radioactive contamination of (by-) products, wastes and plant installations. In this study, scale samples were collected from a decommissioned phosphoric acid processing plant. To determine the nature and concentration of NORM retained in pipe-work and associated process plant, four main areas of the site were investigated: (1) the 'Green Acid Plant', where crude acid was concentrated; (2) the green acid storage tanks; (3) the Purified White Acid (PWA) plant, where inorganic impurities were removed; and (4) the solid waste, disposed of on-site as landfill. The scale samples predominantly comprise the following: fluorides (e.g. ralstonite); calcium sulphate (e.g. gypsum); and an assemblage of mixed fluorides and phosphates (e.g. iron fluoride hydrate, calcium phosphate), respectively. The radioactive inventory is dominated by U-238 and its decay chain products, and significant fractionation along the series occurs. Compared to the feedstock ore, elevated concentrations (<= 8.8 Bq/g) of U-238 Were found to be retained in installations where the process stream was rich in fluorides and phosphates. In addition, enriched levels (<= 11 Bq/g) of Ra-226 were found in association with precipitates of calcium sulphate. Water extraction tests indicate that many of the scales and waste contain significantly soluble materials and readily release radioactivity into solution. (c) 2005 Elsevier Ltd. All rights reserved.
Resumo:
The high thermal storage capacity of phase change material (PCM) can reduce energy consumption in buildings through energy storage and release when combined with renewable energy sources, night cooling, etc. PCM boards can be used to absorb heat gains during daytime and release heat at night. In this paper, the thermal performance of an environmental chamber fitted with phase change material boards has been investigated. During a full-cycle experiment, i.e. charging–releasing cycle, the PCM boards on a wall can reduce the interior wall surface temperature during the charging process, whereas the PCM wall surface temperature is higher than that of the other walls during the heat releasing process. It is found that the heat flux density of the PCM wall in the melting zone is almost twice as large as that of ordinary wall. Also, the heat-insulation performance of a PCM wall is better than that of an ordinary wall during the charging process, while during the heat discharging process, the PCM wall releases more heat energy. The convective heat transfer coefficient of PCM wall surface calculated using equations for a normal wall material produces an underestimation of this coefficient. The high convective heat transfer coefficient for a PCM wall is due to the increased energy exchange between the wall and indoor air.
Resumo:
The presented study examined the opinion of in-service and prospective chemistry teachers about the importance of usage of molecular and crystal models in secondary-level school practice, and investigated some of the reasons for their (non-) usage. The majority of participants stated that the use of models plays an important role in chemistry education and that they would use them more often if the circumstances were more favourable. Many teachers claimed that three-dimensional (3d) models are still not available in sufficient number at their schools; they also pointed to the lack of available computer facilities during chemistry lessons. The research revealed that, besides the inadequate material circumstances, less than one third of participants are able to use simple (freeware) computer programs for drawing molecular structures and their presentation in virtual space; however both groups of teachers expressed the willingness to improve their knowledge in the subject area. The investigation points to several actions which could be undertaken to improve the current situation.
Resumo:
Several brand identity frameworks have been published in the B2C and the B2B brand marketing literature. A reliable, valid and parsimonious service brand identity scale that empirically establishes the construct's dimensionality in a B2B market has yet to be developed. This paper reports the findings of a study conducted amongst 421 senior executives working in the UK IT Service sector to develop and validate a B2B Service Brand Identity Scale. Following established scale development procedures support is provided for a B2B Service Brand Identity Scale comprising five dimensions; employee and client focus, visual identity, brand personality, consistent communications and human resource initiatives. Concluding remarks discuss theoretical and managerial implications with limitations and directions for future research.
Resumo:
The quality of a country’s human-resource base can be said to determine its level of success in social and economic development. This study focuses on some␣of the major human-resource development issues that surround the implementation of South Africa’s policy of multilingualism in education. It begins by discussing the relationship between knowledge, language, and human-resource, social and economic development within the global cultural economy. It then considers the situation in South Africa and, in particular, the implications of that country’s colonial and neo-colonial past for attempts to implement the new policy. Drawing on the linguistic-diversity-in-education debate in the United Kingdom of the past three decades, it assesses the first phase of an in-service teacher-education programme that was carried out at the Project for Alternative Education in South Africa (PRAESA) based at the University of Cape Town. The authors identify key short- and long-term issues related to knowledge exchange in education in multilingual societies, especially concerning the use of African languages as mediums for teaching and learning.
Resumo:
This paper discusses concepts of value from the point of view of the user of the space and the counter view of the provider of the same. Land and property are factors of production. The value of the land flows from the use to which it is put, and that in turn, is dependent upon the demand (and supply) for the product or service that is produced/provided from that space. If there is a high demand for the product (at a fixed level of supply), the price will increase and the economic rent for the land/property will increase accordingly. This is the underlying paradigm of Ricardian rent theory where the supply of land is fixed and a single good is produced. In such a case the rent of land is wholly an economic rent. Economic theory generally distinguishes between two kinds of price, price of production or “value in use” (as determined by the labour theory of value), and market price or “value in exchange” (as determined by supply and demand). It is based on a coherent and consistent theory of value and price. Effectively the distinction is between what space is ‘worth’ to an individual and that space’s price of exchange in the market place. In a perfect market where any individual has access to the same information as all others in the market, price and worth should coincide. However in a market where access to information is not uniform, and where different uses compete for the same space, it is more likely that the two figures will diverge. This paper argues that the traditional reliance of valuers to use methods of comparison to determine “price” has led to an artificial divergence of “value in use” and “value in exchange”, but now such comparison are becoming more difficult due to the diversity of lettings in the market place, there will be a requirement to return to fundamentals and pay heed to the thought process of the user in assessing the worth of the space to be let.