The implementation of a low-cost production-line inspection system

This article describes an application of computers to a consumer-based production engineering environment. Particular consideration is given to the utilisation of low-cost computer systems for the visual inspection of components on a production line in real time. The process of installation is discussed, from identifying the need for artificial vision and justifying the cost, through to choosing a particular system and designing the physical and program structure.

Implementation of microprocessor based self-tuning control on a heating system

This paper describes the implementation, using a microprocessor, of a self-tuning control algorithm on a heating system. The algorithm is based on recursive least squares parameter estimation with a state-space, pole placement design criterion and shows how the controller behaves when applied to an actual system.

An analysis of real time implementation of Fourier transform-based frequency recognition algorithms

Frequency recognition is an important task in many engineering fields such as audio signal processing and telecommunications engineering, for example in applications like Dual-Tone Multi-Frequency (DTMF) detection or the recognition of the carrier frequency of a Global Positioning, System (GPS) signal. This paper will present results of investigations on several common Fourier Transform-based frequency recognition algorithms implemented in real time on a Texas Instruments (TI) TMS320C6713 Digital Signal Processor (DSP) core. In addition, suitable metrics are going to be evaluated in order to ascertain which of these selected algorithms is appropriate for audio signal processing(1).

An MPI-based implementation of intelligent agents on clusters

Recent research in multi-agent systems incorporate fault tolerance concepts, but does not explore the extension and implementation of such ideas for large scale parallel computing systems. The work reported in this paper investigates a swarm array computing approach, namely 'Intelligent Agents'. A task to be executed on a parallel computing system is decomposed to sub-tasks and mapped onto agents that traverse an abstracted hardware layer. The agents intercommunicate across processors to share information during the event of a predicted core/processor failure and for successfully completing the task. The feasibility of the approach is validated by implementation of a parallel reduction algorithm on a computer cluster using the Message Passing Interface.

A cluster-based implementation of a fault-tolerant parallel reduction algorithm using swarm-array computing

Recent research in multi-agent systems incorporate fault tolerance concepts. However, the research does not explore the extension and implementation of such ideas for large scale parallel computing systems. The work reported in this paper investigates a swarm array computing approach, namely ‘Intelligent Agents’. In the approach considered a task to be executed on a parallel computing system is decomposed to sub-tasks and mapped onto agents that traverse an abstracted hardware layer. The agents intercommunicate across processors to share information during the event of a predicted core/processor failure and for successfully completing the task. The agents hence contribute towards fault tolerance and towards building reliable systems. The feasibility of the approach is validated by simulations on an FPGA using a multi-agent simulator and implementation of a parallel reduction algorithm on a computer cluster using the Message Passing Interface.

Implementation of robust hybrid feedback FxLMS active noise cancellation headset

Instability is a serious problem for acoustic Active Noise Cancellation (ANC) headsets as a result of large errors in estimating the transfer function of the plant. Typically this occurs when, for example, a wearer adjusts the headset. In this paper, the instability problem of adaptive ANC headset is addressed. To ensure stability of the whole system, we propose a hybrid solution consisting of an analog feedback loop parallel to the digital loop, and the role of the analog loop in stabilizing the headset is analyzed theoretically. Finally the methodology of implementing such a hybrid ANC headset is described in detail. The experiments carried out on the headset prototype show that the headset is robust under considerable fluctuations of the plant transfer characteristics, and has very good noise cancellation performance both for narrow-band and wide-band disturbances.

Evaluating the likelihood of the adoption of an animal welfare assessment system in European agri-food supply chains

Purpose – The purpose of this paper is to analyse the likelihood of adoption of a recently designed Welfare Assessment System in agri-food supply chains and the factors affecting the adoption decision. The application is carried out for pig and poultry chains. Design/methodology/approach – This research consisted of two main components: interviews with retailers in pig and poultry supply chains in eight different EU countries to explore their perceptions towards the adoption possibilities of the welfare assessment system; and a conjoint analysis designed to evaluate the perceived adoption likelihood of the assessment system by different Standards Formulating Organisations (SFOs). Findings – Stakeholders were found to be especially concerned about the costs of implementation of the system and how it could, or should, be merged with existing assurance schemes. Another conclusion of the study is that the presence of a strong third independent party supporting the implementation of the welfare assessment system would be the most important influence on the decision whether, or not, to adopt it. Originality/value – This research evaluates the adoption possibilities of a novel Welfare Assessment System and presents the views of different supply chain stakeholders on an adoption of such a system. The main factors affecting the adoption decision are identified and analysed. Contrary to expectations, the costs of adoption of a new welfare assessment system were not considered to be the most important factor affecting the decision of supply chain stakeholders about the adoption of this new welfare system.

The HadGEM2-ES implementation of CMIP5 centennial simulations

The scientific understanding of the Earth’s climate system, including the central question of how the climate system is likely to respond to human-induced perturbations, is comprehensively captured in GCMs and Earth System Models (ESM). Diagnosing the simulated climate response, and comparing responses across different models, is crucially dependent on transparent assumptions of how the GCM/ESM has been driven – especially because the implementation can involve subjective decisions and may differ between modelling groups performing the same experiment. This paper outlines the climate forcings and setup of the Met Office Hadley Centre ESM, HadGEM2-ES for the CMIP5 set of centennial experiments. We document the prescribed greenhouse gas concentrations, aerosol precursors, stratospheric and tropospheric ozone assumptions, as well as implementation of land-use change and natural forcings for the HadGEM2-ES historical and future experiments following the Representative Concentration Pathways. In addition, we provide details of how HadGEM2-ES ensemble members were initialised from the control run and how the palaeoclimate and AMIP experiments, as well as the “emission driven” RCP experiments were performed.

Multi-agent collaboration for decision support in shared zones of intelligent buildings

In domain of intelligent buildings, saving energy in buildings and increasing preferences of occupants are two important factors. These factors are the important keys for evaluating the performance of work environment. In recent years, many researchers combine these areas to create the system that can change from original to the modern work environment called intelligent work environment. Due to advance of agent technology, it has received increasing attention in the area of intelligent pervasive environments. In this paper, we review several issues in intelligent buildings, with respect to the implementation of control system for intelligent buildings via multi-agent systems. Furthermore, we present the MASBO (Multi-Agent System for Building cOntrol) that has been implemented for controlling the building facilities to reach the balancing between energy efficiency and occupant’s comfort. In addition to enhance the MASBO system, the collaboration through negotiation among agents is presented.

Dynamical downscaling: Assessment of model system dependent retained and added variability for two different regional climate models

On the development of horizontal CEN standards supporting the implementation of EU directives on sludge, soil and biowaste - Project HORIZONTAL

We give an overview on the development of "horizontal" European Committee for Standardisation (CEN) standards for characterising soils, sludges and biowaste in the context of environmental legislation in the European Union (EU). We discuss the various steps in the development of a horizontal standard (i.e. assessment of the possibility of such a standard, review of existing normative documents, pre-normative testing and validation) and related problems. We also provide a synopsis of European and international standards covered by the so-called Project HORIZONTAL. (C) 2004 Elsevier Ltd. All rights reserved.

Innovative implementation of iLearn e-Portfolio for Personal Development Planning

iLearn is a Web 2.0 tool developed in Blackboard to help students with Personal Development Planning (PDP). This paper describes a case study on how the innovative use of mobile digital technology in iLearn e-Portfolio for developing reflective portfolios for PDP benefits the students. The e-Portfolio tool benefits students as it enables them to create and share portfolios, record achievements and reflections that support future job applications and promotion. Students find it beneficial because they can make use of iLearn e-Portfolio to keep academic records and achievements, activities and interests, work experience, reflective practice, employer information and some other useful resources, and also to tailor their CV and covering letters including evidence to support their CV, transferable skills and selling points. Useful information for preparing for an interview, reflecting after an event and any thoughts and evaluation can be kept in iLearn e-Portfolio. Keeping assessment and feedback records in iLearn e-Portfolio enables students to know their progress, to identify any gaps they need to fill to develop their study practices and areas for development. The key points from the feedback on the assignments and assessments are beneficial for future improvement. The reflections on the assignments and how students make use of the advice are particularly useful to improve their overall performance. In terms of pedagogical benefits, the “Individual Learner Profile” records and reviews evidence in verbal communication, basic and higher academic skills, time management, numeracy skill and IT skills, students become increasingly aware of their own strengths and any weaker areas that may require development. The e-Portfolio also provides opportunity for students to reflect on the experience and skills they have gained whilst participating in activities outside their studies. As the iLearn e-Portfolio is a reflective practice tool, it is consistent with the principle of Schon's reflective practitioner to reframe problems and to explore the consequences of actions. From the students’ feedback, for those who engage regularly in iLearn, they are better able to set agendas for their Personal Tutorial meetings and provide their Personal Tutor with a unique record of their achievements, skills and attributes which help them writing effective references for them. They make the most of their student experience in general. They also enhance their transferable skills and employability overall. The iLearn e-Portfolio prepares for the workplace and life beyond University including continuing professional development. Students are aware of their transferable skills, evidence of the skills and skill level, including award or accreditation, and their personal reflection on their transferable skills. It is beneficial for students to be aware of their transferable skills, to produce evidence of the skills and skills level such as award and accreditation, and to record their personal reflection on their transferable skills. Finally, the innovative use of mobile digital technology in iLearn e-Portfolio for developing reflective portfolios for PDP will improve their employability.

The 'direct costs' of livestock disease: The development of a system of models for the analysis of 30 endemic livestock diseases in Great Britain

The 'direct costs' attributable to 30 different endemic diseases of farm animals in Great Britain are estimated using a standardised method to construct a simple model for each disease that includes consideration of disease prevention and treatment costs. The models so far developed provide a basis for further analyses including cost-benefit analyses for the economic assessment of disease control options. The approach used reflects the inherent livestock disease information constraints, which limit the application of other economic analytical methods. It is a practical and transparent approach that is relatively easily communicated to veterinary scientists and policy makers. The next step is to develop the approach by incorporating wider economic considerations into the analyses in a way that will demonstrate to policy makers and others the importance of an economic perspective to livestock disease issues.