Measuring and comparing constraints to improved biosecurity amongst GB farmers, veterinarians and the auxiliary industries

Constraints to the introduction of enhanced biosecurity systems are rarely considered in sufficient detail when population medicine specialists initiate new control schemes. The main objective of our research was to investigate and compare the different attitudes constraining improvement in biosecurity for cattle and sheep farmers, practising veterinary surgeons and the auxiliary industries in Great Britain (GB). This study was carried out utilizing farmer focus groups, a questionnaire survey of veterinary practitioners and a telephone survey of auxiliary industry representatives. It appears that farmers and veterinarians have their own relatively clear definitions for biosecurity in relation to some major diseases threatening GB agriculture. Overall, farmers believe that other stakeholders, such as the government, should make a greater contribution towards biosecurity within GB. Conversely, veterinary practitioners saw their clients' ability or willingness to invest in biosecurity measures as a major constraint. Veterinary practitioners also felt that there was need for additional proof of efficacy and/or the potential economic benefits of proposed farm biosecurity practices better demonstrated. Auxiliary industries, in general, were not certain of their role in biosecurity although study participants highlighted zoonoses as part of the issue and offered that most of the constraints operated at farm level. (C) 2008 Elsevier B.V. All rights reserved.

Measuring and comparing constraints to improved biosecurity amongst GB farmers, veterinarians and the auxiliary industries

Constraints to the introduction of enhanced biosecurity systems are rarely considered in sufficient detail when population medicine specialists initiate new control schemes. The main objective of our research was to investigate and compare the different attitudes constraining improvement in biosecurity for cattle and sheep farmers, practising veterinary surgeons and the auxiliary industries in Great Britain (GB). This study was carried out utilizing farmer focus groups, a questionnaire survey of veterinary practitioners and a telephone survey of auxiliary industry representatives. It appears that farmers and veterinarians have their own relatively clear definitions for biosecurity in relation to some major diseases threatening GB agriculture. Overall, farmers believe that other stakeholders, such as the government, should make a greater contribution towards biosecurity within GB. Conversely, veterinary practitioners saw their clients' ability or willingness to invest in biosecurity measures as a major constraint. Veterinary practitioners also felt that there was need for additional proof of efficacy and/or the potential economic benefits of proposed farm biosecurity practices better demonstrated. Auxiliary industries, in general, were not certain of their role in biosecurity although study participants highlighted zoonoses as part of the issue and offered that most of the constraints operated at farm level. (C) 2008 Elsevier B.V. All rights reserved.

Good governance and the extractive industries in sub-saharan Africa

This article critically examines the challenges that come with implementing the Extractive Industries Transparency Initiative (EITI)a policy mechanism marketed by donors and Western governments as a key to facilitating economic improvement in resource-rich developing countriesin sub-Saharan Africa. The forces behind the EITI contest that impoverished institutions, the embezzlement of petroleum and/or mineral revenues, and a lack of transparency are the chief reasons why resource-rich sub-Saharan Africa is underperforming economically, and that implementation of the EITI, with its foundation of good governance, will help address these problems. The position here, however, is that the task is by no means straightforward: that the EITI is not necessarily a blueprint for facilitating good governance in the region's resource-rich countries. It is concluded that the EITI is a policy mechanism that could prove to be effective with significant institutional change in host African countries but, on its own, it is incapable of reducing corruption and mobilizing citizens to hold government officials accountable for hoarding profits from extractive industry operations.

Molecular guided catalytic hydrogenation by micelle-hosted Pd nanoparticle in supercritical CO2

Homogeneous dispersion of microemulsion containing palladium nanoparticles in scCO(2) is, for the first time, observed via sapphire window reactor and these particles show an unusual reluctance for double bond hydrogenation of citral aldehyde at hydrophobic end rather than hydrophilic end (high regioselectivity) owing to the unique micelle environment in supercritical carbon dioxide that guide a head-on attack of the molecule.

Midpoint perturbation response in haptically-guided movements

This study investigates the human response to impulse perturbations at the midpoint of a haptically-guided straight-line point-to-point movement. Such perturbation response may be used as an assessment tool during robot-mediated neuro-rehabilitation therapy. Subjects show variety in their perturbation responses. Movements with a lower perturbation displacement exhibit high frequency oscillations, indicative of increased joint stiffness. Equally, movements with a high perturbation displacement exhibit lower frequency oscillations with higher amplitude and a longer settling time. Some subjects show unexpected transients during the perturbation impulse, which may be caused by complex joint interactions in the hand and arm.

Feasibility of guided CBT self-help for childhood anxiety disorders in primary care

Anxiety disorders in childhood are common, disabling and run a chronic course. Cognitive Behaviour Therapy (CBT) effective but is expensive and trained therapists are scarce. Guided self-help treatments may be a means of widening access to treatment. This study aimed to examine the feasibility of guided CBT self-help for childhood anxiety disorders in Primary Care, specifically in terms of therapist adherence, patient and therapist satisfaction and clinical gain. Participants were children aged 5-12 years referred to two Primary Child and Adolescent Mental Health Services (PCAMHSs) in Oxfordshire, UK, who met diagnostic criteria for a primary anxiety disorder. Of the 52 eligible children, 41 anxious children were assessed for anxiety severity and interference before and after receiving CBT self-help, delivered via the parent (total therapy time= 5 hours) by Primary Mental Health Workers (PMHWs). Therapy sessions were rated for treatment adherence and patients and PMHWs completed satisfaction questionnaires after treatment completion. Over 80% of therapy sessions were rated at a high level of treatment adherence. Parents and PMHWs reported high satisfaction with the treatment. 61% of the children assessed no longer met criteria for their primary anxiety disorder diagnosis following treatment, and 76% were rated as ‘much’/’very much’ improved on the Clinician’s Global Impression-Improvement scale. There were significant reductions on parent and child report measures of anxiety symptoms, interference, and depression. Preliminary exploration indicated that parental anxiety was associated with child treatment outcome. The findings suggest that guided CBT self-help represents a promising treatment for childhood anxiety in primary care.

Codification vs personalisation: A study of the information evaluation practice between aerospace and construction industries

In the emerging digital economy, the management of information in aerospace and construction organisations is facing a particular challenge due to the ever-increasing volume of information and the extensive use of information and communication technologies (ICTs). This paper addresses the problems of information overload and the value of information in both industries by providing some cross-disciplinary insights. In particular it identifies major issues and challenges in the current information evaluation practice in these two industries. Interviews were conducted to get a spectrum of industrial perspectives (director/strategic, project management and ICT/document management) on these issues in particular to information storage and retrieval strategies and the contrasting approaches to knowledge and information management of personalisation and codification. Industry feedback was collected by a follow-up workshop to strengthen the findings of the research. An information-handling agenda is outlined for the development of a future Information Evaluation Methodology (IEM) which could facilitate the practice of the codification of high-value information in order to support through-life knowledge and information management (K&IM) practice.

Winning and losing in the creative industries: an analysis of creative graduates' career opportunities across creative disciplines

Following earlier work looking at overall career difficulties and low economic rewards faced by graduates in creative disciplines, the paper takes a closer look into the different career patterns and economic performance of “Bohemian” graduates across different creative disciplines. While it is widely acknowledged in the literature that careers in the creative field tend to be unstructured, often relying on part-time work and low wages, our knowledge of how these characteristics differ across the creative industries and occupational sectors is very limited. The paper explores the different trajectory and career patterns experienced by graduates in different creative disciplinary fields and their ability to enter creative occupations. Data from the Higher Education Statistical Agency (HESA) are presented, articulating a complex picture of the reality of finding a creative occupation for creative graduates. While students of some disciplines struggle to find full-time work in the creative economy, for others full-time occupation is the norm. Geography plays a crucial role also in offering graduates opportunities in creative occupations and higher salaries. The findings are contextualised in the New Labour cultural policy framework and conclusions are drawn on whether the creative industries policy construct has hidden a very problematic reality of winners and losers in the creative economy.

Perspectives on community representation within the Extractive Industries Transparency Initiative: experiences from south-east Madagascar

This article critically examines the nature and quality of governance in community representation and civil society engagement in the context of trans-national large-scale mining, drawing on experiences in the Anosy Region of south-east Madagascar. An exploration of functional relationships between government, mining business and civil society stakeholders reveals an equivocal legitimacy of certain civil society representatives, created by state manipulation, which contributes to community disempowerment. The appointment of local government officials, rather than election, creates a hierarchy of upward dependencies and a culture where the majority of officials express similar views and political alliances. As a consequence, community resistance is suppressed. Voluntary mechanisms such as Corporate Social Responsibility (CSR) and the Extractive Industries Transparency Initiative (EITI) advocate community stakeholder engagement in decision making processes as a measure to achieve public accountability. In many developing countries, where there is a lack of transparency and high levels of corruption, the value of this engagement, however, is debatable. Findings from this study indicate that the power relationships which exist between stakeholders in the highly lucrative mining industry override efforts to achieve "good governance" through voluntary community engagement. The continuing challenge lies in identifying where the responsibility sits in order to address this power struggle to achieve fair representation.

Corporate social responsibility in the extractive industries: experiences from developing countries

This paper introduces a special issue on ‘Corporate Social Responsibility in the Extractive Industries: Experiences from Developing Countries’. Drawing upon case study analysis from Latin America, sub-Saharan Africa and Asia, the papers in this issue broaden understanding of how multinational mining and oil and gas companies have embraced the CSR challenge and responded to criticisms of their performance in developing countries. This paper provides an introduction to the debate on CSR in the extractive industries in developing countries, reviewing the key issues examined on this subject to date.

Firm size and competition: a comparison of the housebuilding industries in Australia, the UK and the USA

Housebuilding is frequently viewed as an industry full of small firms. However, large firms exist in many countries. Here, a comparative analysis is made of the housebuilding industries in Australia, Britain and the USA. Housebuilding output is found to be much higher in Australia and the USA than in Britain when measured on a per capita basis. At the same time, the degree of market concentration in Australia and the USA is relatively low but in Britain it is far greater, with a few firms having quite substantial market shares. Investigation of the size distribution of the top 100 or so firms ranked by output also shows that the decline in firm size from the largest downwards is more rapid in Britain than elsewhere. The exceptionalism of the British case is put down to two principal reasons. First, the close proximity of Britain’s regions enables housebuilders to diversify successfully across different markets. The gains from such diversification are best achieved by large firms, because they can gain scale benefits in any particular market segment. Second, land shortages induced by a restrictive planning system encourage firms to takeover each other as a quick and beneficial means of acquiring land. The institutional rules of planning also make it difficult for new entrants to come in at the bottom end of the size hierarchy. In this way, concentration grows and a handful of large producers emerge. These conditions do not hold in the other two countries, so their industries are less concentrated. Given the degree of rivalry between firms over land purchases and takeovers, it is difficult to envisage them behaving in a long-term collusive manner, so that competition in British housebuilding is probably not unduly compromised by the exceptional degree of firm concentration. Reforms to lower the restrictions, improve the slow responsiveness and reduce the uncertainties associated with British planning systems’ role in housing supply are likely to greatly improve the ability of new firms to enter housebuilding and all firms’ abilities to increase output in response to rising housing demand. Such reforms would also probably lower overall housebuilding firm concentration over time.

Delays versus performance of visually guided systems

The paper presents an overview of dynamic systems with inherent delays in both feedforward and feedback paths and how the performance of such systems can be affected by such delays. The authors concentrate on visually guided systems, where the behaviour of the system is largely dependent on the results of the vision sensors, with particular reference to active robot heads (real-time gaze control). We show how the performance of such systems can deteriorate substantially with the presence of unknown and/or variable delays. Considered choice of system architecture, however, allows the performance of active vision systems to be optimised with respect to the delays present in the system.

Improvement of 3D protein models using multiple templates guided by single-template model quality assessment

Motivation: Modelling the 3D structures of proteins can often be enhanced if more than one fold template is used during the modelling process. However, in many cases, this may also result in poorer model quality for a given target or alignment method. There is a need for modelling protocols that can both consistently and significantly improve 3D models and provide an indication of when models might not benefit from the use of multiple target-template alignments. Here, we investigate the use of both global and local model quality prediction scores produced by ModFOLDclust2, to improve the selection of target-template alignments for the construction of multiple-template models. Additionally, we evaluate clustering the resulting population of multi- and single-template models for the improvement of our IntFOLD-TS tertiary structure prediction method. Results: We find that using accurate local model quality scores to guide alignment selection is the most consistent way to significantly improve models for each of the sequence to structure alignment methods tested. In addition, using accurate global model quality for re-ranking alignments, prior to selection, further improves the majority of multi-template modelling methods tested. Furthermore, subsequent clustering of the resulting population of multiple-template models significantly improves the quality of selected models compared with the previous version of our tertiary structure prediction method, IntFOLD-TS.