34 resultados para FMEA (Failure Mode Effects Analysis)
em CentAUR: Central Archive University of Reading - UK
Resumo:
Previously published data on the vibrational fundamentals and overtones of the carbonyl stretching modes of Ni(CO)4 and Co(CO)3NO are reinterpreted using the recent model of Mills and Robiette, including Darling-Dennison resonances and local mode effects. The harmonic wavenumber θm and anharmonicity constant xm associated with the carbonyl and nitrosyl stretching modes are derived, and the 13C and 18O isotopic shifts are discussed in relation to the harmonic and anharmonic force field.
Resumo:
The results recently obtained by Mills and Robiette on local-mode effects in H2O, NH3 and CH4 type molecules are extended to ethene (C2H4) and propadiene (C3H4) type molecules. General relations among the anharmonic xrs constants and the Darling-Dennison Krrss constants for the stretching vibrations are derived, called “x,K relations”, which allow local-mode effects to be generated by adding the appropriate anharmonic and Darling-Dennison constants to the familiar normal-mode model of molecular vibrations. The general utility of x,K relations is discussed, and the results are reviewed for the molecular types for which they have so far been derived.
Resumo:
Some of the characteristics of high overtone spectra observed in the near infrared are discussed, particularly in relation to local mode effects, the increasing density of states, and the effect of inter-state resonances and intramolecular vibrational redistribution.
Resumo:
A discrete element model is used to study shear rupture of sea ice under convergent wind stresses. The model includes compressive, tensile, and shear rupture of viscous elastic joints connecting floes that move under the action of the wind stresses. The adopted shear rupture is governed by Coulomb’s criterion. The ice pack is a 400 km long square domain consisting of 4 km size floes. In the standard case with tensile strength 10 times smaller than the compressive strength, under uniaxial compression the failure regime is mainly shear rupture with the most probable scenario corresponding to that with the minimum failure work. The orientation of cracks delineating formed aggregates is bimodal with the peaks around the angles given by the wing crack theory determining diamond-shaped blocks. The ice block (floe aggregate) size decreases as the wind stress gradient increases since the elastic strain energy grows faster leading to a higher speed of crack propagation. As the tensile strength grows, shear rupture becomes harder to attain and compressive failure becomes equally important leading to elongation of blocks perpendicular to the compression direction and the blocks grow larger. In the standard case, as the wind stress confinement ratio increases the failure mode changes at a confinement ratio within 0.2–0.4, which corresponds to the analytical critical confinement ratio of 0.32. Below this value, the cracks are bimodal delineating diamond shape aggregates, while above this value failure becomes isotropic and is determined by small-scale stress anomalies due to irregularities in floe shape.
Resumo:
The Holocene estuarine silts of the Severn Estuary Levels (southwest Britain) are representative of their kind in northwest Europe. They contain two broad types of plant material: particles codeposited with mineral grains from the estuarine water body, and extraneous debris (stems of indigenous prior plants; post depositional root matter) which is difficult to remove completely by physical means. Treatment with hydrogen peroxide before laser granulometry removes all plant material regardless of kind, drastically reduces values for the mean grain size and median size relative to untreated samples, but has little effect on the mode, except for a restricted group of bimodal-platykurtic, medium-coarse silts. It is concluded that, in the case of sediments of the general kind examined, no advantages acrue from the treatment of samples with hydrogen peroxide prior to analysis. Although a discrete rather than continuous variable, values of the mode obtained from untreated sediments are suggested to be acceptable for most purposes where a measure of central tendency is required.
Biosecurity in agriculture: an economic analysis of coexistence of professional and hobby production
Resumo:
One component of biosecurity is protection against invasive alien species, which are one of the most important threats worldwide to native biodiversity and economic profitability in various sectors, including agriculture. However, agricultural producers are not homogeneous. They may have different objectives and priorities, use different technologies, and occupy heterogeneous parcels of land. If the producers differ in terms of their attitude towards invasive pests and the damages they cause, there are probably external effects in the form of pest spread impacts and subsequent damages caused. We study such impacts in the case of two producer types: profit-seeking professional producers and utility-seeking hobby producers. We show that the hobby producer, having first set a breeding ground for the pest, under-invests in pest control. We also discuss potential policy instruments to correct this market failure and highlight the importance of considering different stakeholders and their heterogeneous incentives when designing policies to control invasive alien species.
Resumo:
1. The growth (increase in height and leaf number) of four grass species was reduced by a -0.5 MPa drought stress, but the performance of an associated herbivore, Rhopalosiphum padi (L.), was not affected consistently. The intrinsic rate of increase of R. padi was reduced by drought stress on three grass species, including Dactylis glomerata (L.), but was unaffected on Arrhenatherum elatius (L.). Therefore, there is no general relationship in the effect of plant drought on an insect herbivore, even among closely related host plant species. 2. Drought stress increased the quality of plant phloem sap, as indicated by increased sieve element osmotic pressure and essential amino acid concentrations. Thus, diet quality could not account for the reduced performance of R. padi under drought stress. The concentration of essential amino acids in the phloem of well-watered A. elatius was, however, lower than that of well-watered D. glomerata, correlating with the decreased performance of aphids on well-watered A. elatius. 3. There were no differences in aphid feeding duration between watering treatments or plant species but sap ingestion rates were reduced significantly under drought stress. 4. Using the measure of dietary amino acid concentrations and the estimate of sap ingestion, the essential amino acid flux through aphids was calculated. Compared with the flux through aphids feeding on well-watered D. glomerata, there was a reduction in aphids feeding on drought-stressed D. glomerata and drought-stressed A. elatius due to lower sap ingestion rates. The flux through aphids on well-watered A. elatius was also reduced due to low phloem essential amino acid concentrations. Thus, the performance of an aphid is correlated with the availability and accessibility of essential amino acids.
Resumo:
Accelerated failure time models with a shared random component are described, and are used to evaluate the effect of explanatory factors and different transplant centres on survival times following kidney transplantation. Different combinations of the distribution of the random effects and baseline hazard function are considered and the fit of such models to the transplant data is critically assessed. A mixture model that combines short- and long-term components of a hazard function is then developed, which provides a more flexible model for the hazard function. The model can incorporate different explanatory variables and random effects in each component. The model is straightforward to fit using standard statistical software, and is shown to be a good fit to the transplant data. Copyright (C) 2004 John Wiley Sons, Ltd.
Resumo:
Growth patterns and cropping were evaluated over the season for the everbearing strawberry 'Everest' at a range of temperatures (15-27degreesC) in two light environments (ambient and 50% shade). The highest yield was recorded for unshaded plants grown at 23degreesC, but the optimum temperature for vegetative growth was 15degreesC. With increasing temperature fruit number increased, but fruit weight decreased. Fruit weight was also significantly reduced by shade, and although 'Everest' showed a degree of shade tolerance in vegetative growth, yield was consistently reduced by shade. Shade also reduced the number of crowns developed by the plants over the course of the season, emphasising that crown number was ultimately the limiting factor for yield potential. We conclude that, in contrast to Junebearers which partition more assimilates to fruit at temperatures around 15degreesC (Le Miere et al., 1998), optimised cropping in the everbearer 'Everest' is achieved at the significantly higher temperature of 23degreesC. These findings have significance for commercial production, in which protection tends to reduce light levels but increase average temperature throughout the season.
Resumo:
Most building services products are installed while a building is constructed, but they are not operated until the building is commissioned. The warranty of the products may cover the time starting from their installation to the end of the warranty period. Prior to the commissioning of the building, the products are at a dormant mode (i.e., not operated) but protected by the warranty. For such products, both the usage intensity and the failure patterns are different from those with continuous usage intensity and failure patterns. This paper develops warranty cost models for repairable products with a dormant mode from both the manufacturer's and buyer's perspectives. Relationships between the failure patterns at the dormant mode and at the operational mode are also discussed. Numerical examples and sensitivity analysis are used to demonstrate the applicability of the methodology derived in the paper.
Resumo:
Rationale: Central cannabinoid systems have been implicated in appetite control through the respective hyperphagic and anorectic actions of CB1 agonists and antagonists. The motivational changes underlying these actions remain to be determined, but may involve alterations to food palatability. Objectives: The mode of action of cannabinoids on ingestion was investigated by examining the effects of exogenous and endogenous agonists, and a selective CB1 receptor antagonist, on licking microstructure in rats ingesting a palatable sucrose solution. Methods: Microstructural analyses of licking for a 10% sucrose solution was performed over a range of agonist and antagonist doses administered to non-deprived, male Lister hooded rats. Results: Delta(9)-tetrahydrocannabinol (0.5, 1 and 3 mg/kg) and anandamide (1 mg/kg and 3 mg/kg) significantly increased total number of licks. This was primarily due to an increase in bout duration rather than bout number. There was a nonsignificant increase in total licks following administration of 2-arachidonoyl glycerol (0.2, 1.0 and 2.0 mg/kg), whereas administration of the CB1 antagonist SR141716 (1 mg/kg and 3 mg/kg) significantly decreased total licks. All drugs, with the exception of anandamide, significantly decreased the intra-bout lick rate. An exponential function fitted to the cumulative lick rate curves for each drug revealed that all compounds altered the asymptote of this function without having any marked effects on the exponent. Conclusions: These data are consistent with endocannabinoid involvement in the mediation of food palatability.