Thalassaemia: its diagnosis and interpretation in past skeletal populations

The diagnosis of thalassaemia in archaeological populations has long been hindered by a lack of pathogonomic features, and the non-specific nature of cribra orbitalia and porotic hyperostosis. In fact, clinical research has highlighted more specific diagnostic criteria for thalassaemia major and intermedia based on changes to the thorax (‘rib-within-a-rib’ and costal osteomas). A recent re-examination of 364 child skeletons from Romano-British Poundbury Camp, Dorset revealed children with general ‘wasting’ of the bones and three children who demonstrated a variety of severe lesions (e.g. zygomatic bone and rib hypertrophy, porotic hyperostosis, rib lesions, osteopenia and pitted diaphyseal shafts) that are inconsistent with dietary deficiency alone, and more consistent with a diagnosis of genetic anaemia. Two of these children displayed rib lesions typical of those seen in modern cases of thalassaemia. The children of Poundbury Camp represent the first cases of genetic anaemia identified in a British archaeological population. As thalassaemia is a condition strongly linked to Mediterranean communities, the presence of this condition in a child from England, found within a mausoleum, suggests that they were born to wealthy immigrant parents living in this small Roman settlement in Dorset. This paper explores the diagnostic criteria for genetic anaemia in the archaeological literature and what its presence in ancient populations can contribute to our knowledge of past human migration.

Assessing the impact of nano- and micro-scale zerovalent iron particles on soil microbial activities: Particle reactivity interferes with assay conditions and interpretation of genuine microbial effects

The effects of nano-scale and micro-scale zerovalent iron (nZVI and mZVI) particles on general (dehydrogenase and hydrolase) and specific (ammonia oxidation potential, AOP) activities mediated by the microbial community in an uncontaminated soil were examined. nZVI (diameter 12.5 nm; 10 mg gÿ1 soil)apparently inhibited AOP and nZVI and mZVI apparently stimulated dehydrogenase activity but had minimal influence on hydrolase activity. Sterile experiments revealed that the apparent inhibition of AOP could not be interpreted as such due to the confounding action of the particles, whereas, the nZVIenhanced dehydrogenase activity could represent the genuine response of a stimulated microbial population or an artifact of ZVI reactivity. Overall, there was no evidence for negative effects of nZVI or mZVI on the processes studied. When examining the impact of redox active particles such as ZVI on microbial oxidation–reduction reactions, potential confounding effects of the test particles on assay conditions should be considered.

Design, implementation and interpretation of in vitro batchculture experiments to assess enteric methane mitigation in ruminants—a review

In vitro fermentation techniques (IVFT) have been widely used to evaluate the nutritivevalue of feeds for ruminants and in the last decade to assess the effect of different nutritionalstrategies on methane (CH4) production. However, many technical factors may influencethe results obtained. The present review has been prepared by the ‘Global Network’ FACCE-JPI international research consortium to provide a critical evaluation of the main factorsthat need to be considered when designing, conducting and interpreting IVFT experimentsthat investigate nutritional strategies to mitigate CH4emission from ruminants. Given theincreasing and wide-scale use of IVFT, there is a need to critically review reports in the lit-erature and establish what criteria are essential to the establishment and implementationof in vitro techniques. Key aspects considered include: i) donor animal species and numberof animal used, ii) diet fed to donor animals, iii) collection and processing of rumen fluidas inoculum, iv) choice of substrate and incubation buffer, v) incubation procedures andCH4measurements, vi) headspace gas composition and vii) comparability of in vitro andin vivo measurements. Based on an evaluation of experimental evidence, a set of techni-cal recommendations are presented to harmonize IVFT for feed evaluation, assessment ofrumen function and CH4production.

Origin and structure of Devensian depressions at Letton, Herefordshire

Groups of circular to oval enclosed depressions in soft sediments of Pleistocene age are relatively common in north-west Europe. These features are normally interpreted as being either glacial or periglacial in origin. Where these features are developed in glacial sediments, a glacial (and specifically ‘kettle hole’) genesis is considered most likely. Some groups of features, however, have been re-interpreted as being periglacial in origin and are thought to be the remains of cryogenic mounds (former pingos or palsas/lithalsas). The problem at many sites, of course, is correct identification and previously this was often resolved through extensive trenching of the sediments. The use of geophysics in the form of electrical resistivity tomography and ground probing radar, however, can aid investigation and interpretation and is less invasive. A group of enclosed depressions in the Letton area of Herefordshire within the Last Glacial Maximum ice limit (Late Devensian) have been investigated in this way. The morphology and internal structure of the features and their existence in glaciolacustrine sediments of Late Devensian age strongly suggests that these depressions are kettle holes resulting from ice block discharge into a shallow lakes or lakes, and hence a glacial origin is supported. The lack of any ramparts surrounding the depressions (at the surface or any evidence of these at depth) and the fact that they do not overlap (‘mutually interfere’) indicates that they are not the remains of cryogenic mounds.

Interpretation of ambiguity in children: a prospective study of associations with anxiety and parental interpretations

Interpretation of ambiguity is consistently associated with anxiety in children, however, the temporal relationship between interpretation and anxiety remains unclear as do the developmental origins of interpretative biases. This study set out to test a model of the development of interpretative biases in a prospective study of 110 children aged 5–9 years of age. Children and their parents were assessed three times, annually, on measures of anxiety and interpretation of ambiguous scenarios (including, for parents, both their own interpretations and their expectations regarding their child). Three models were constructed to assess associations between parent and child anxiety and threat and distress cognitions and expectancies. The three models were all a reasonable fit of the data, and supported conclusions that: (i) children’s threat and distress cognitions were stable over time and were significantly associated with anxiety, (ii) parents’ threat and distress cognitions and expectancies significantly predicted child threat cognitions at some time points, and (iii) parental anxiety significantly predicted parents cognitions, which predicted parental expectancies at some time points. Parental expectancies were also significantly predicted by child cognitions. The findings varied depending on assessment time point and whether threat or distress cognitions were being considered. The findings support the notion that child and parent cognitive processes, in particular parental expectations, may be a useful target in the treatment or prevention of anxiety disorders in children.

Design and management of sustainable built environments

The United Nation Intergovernmental Panel on Climate Change (IPCC) makes it clear that climate change is due to human activities and it recognises buildings as a distinct sector among the seven analysed in its 2007 Fourth Assessment Report. Global concerns have escalated regarding carbon emissions and sustainability in the built environment. The built environment is a human-made setting to accommodate human activities, including building and transport, which covers an interdisciplinary field addressing design, construction, operation and management. Specifically, Sustainable Buildings are expected to achieve high performance throughout the life-cycle of siting, design, construction, operation, maintenance and demolition, in the following areas: • energy and resource efficiency; • cost effectiveness; • minimisation of emissions that negatively impact global warming, indoor air quality and acid rain; • minimisation of waste discharges; and • maximisation of fulfilling the requirements of occupants’ health and wellbeing. Professionals in the built environment sector, for example, urban planners, architects, building scientists, engineers, facilities managers, performance assessors and policy makers, will play a significant role in delivering a sustainable built environment. Delivering a sustainable built environment needs an integrated approach and so it is essential for built environment professionals to have interdisciplinary knowledge in building design and management . Building and urban designers need to have a good understanding of the planning, design and management of the buildings in terms of low carbon and energy efficiency. There are a limited number of traditional engineers who know how to design environmental systems (services engineer) in great detail. Yet there is a very large market for technologists with multi-disciplinary skills who are able to identify the need for, envision and manage the deployment of a wide range of sustainable technologies, both passive (architectural) and active (engineering system),, and select the appropriate approach. Employers seek applicants with skills in analysis, decision-making/assessment, computer simulation and project implementation. An integrated approach is expected in practice, which encourages built environment professionals to think ‘out of the box’ and learn to analyse real problems using the most relevant approach, irrespective of discipline. The Design and Management of Sustainable Built Environment book aims to produce readers able to apply fundamental scientific research to solve real-world problems in the general area of sustainability in the built environment. The book contains twenty chapters covering climate change and sustainability, urban design and assessment (planning, travel systems, urban environment), urban management (drainage and waste), buildings (indoor environment, architectural design and renewable energy), simulation techniques (energy and airflow), management (end-user behaviour, facilities and information), assessment (materials and tools), procurement, and cases studies ( BRE Science Park). Chapters one and two present general global issues of climate change and sustainability in the built environment. Chapter one illustrates that applying the concepts of sustainability to the urban environment (buildings, infrastructure, transport) raises some key issues for tackling climate change, resource depletion and energy supply. Buildings, and the way we operate them, play a vital role in tackling global greenhouse gas emissions. Holistic thinking and an integrated approach in delivering a sustainable built environment is highlighted. Chapter two demonstrates the important role that buildings (their services and appliances) and building energy policies play in this area. Substantial investment is required to implement such policies, much of which will earn a good return. Chapters three and four discuss urban planning and transport. Chapter three stresses the importance of using modelling techniques at the early stage for strategic master-planning of a new development and a retrofit programme. A general framework for sustainable urban-scale master planning is introduced. This chapter also addressed the needs for the development of a more holistic and pragmatic view of how the built environment performs, , in order to produce tools to help design for a higher level of sustainability and, in particular, how people plan, design and use it. Chapter four discusses microcirculation, which is an emerging and challenging area which relates to changing travel behaviour in the quest for urban sustainability. The chapter outlines the main drivers for travel behaviour and choices, the workings of the transport system and its interaction with urban land use. It also covers the new approach to managing urban traffic to maximise economic, social and environmental benefits. Chapters five and six present topics related to urban microclimates including thermal and acoustic issues. Chapter five discusses urban microclimates and urban heat island, as well as the interrelationship of urban design (urban forms and textures) with energy consumption and urban thermal comfort. It introduces models that can be used to analyse microclimates for a careful and considered approach for planning sustainable cities. Chapter six discusses urban acoustics, focusing on urban noise evaluation and mitigation. Various prediction and simulation methods for sound propagation in micro-scale urban areas, as well as techniques for large scale urban noise-mapping, are presented. Chapters seven and eight discuss urban drainage and waste management. The growing demand for housing and commercial developments in the 21st century, as well as the environmental pressure caused by climate change, has increased the focus on sustainable urban drainage systems (SUDS). Chapter seven discusses the SUDS concept which is an integrated approach to surface water management. It takes into consideration quality, quantity and amenity aspects to provide a more pleasant habitat for people as well as increasing the biodiversity value of the local environment. Chapter eight discusses the main issues in urban waste management. It points out that population increases, land use pressures, technical and socio-economic influences have become inextricably interwoven and how ensuring a safe means of dealing with humanity’s waste becomes more challenging. Sustainable building design needs to consider healthy indoor environments, minimising energy for heating, cooling and lighting, and maximising the utilisation of renewable energy. Chapter nine considers how people respond to the physical environment and how that is used in the design of indoor environments. It considers environmental components such as thermal, acoustic, visual, air quality and vibration and their interaction and integration. Chapter ten introduces the concept of passive building design and its relevant strategies, including passive solar heating, shading, natural ventilation, daylighting and thermal mass, in order to minimise heating and cooling load as well as energy consumption for artificial lighting. Chapter eleven discusses the growing importance of integrating Renewable Energy Technologies (RETs) into buildings, the range of technologies currently available and what to consider during technology selection processes in order to minimise carbon emissions from burning fossil fuels. The chapter draws to a close by highlighting the issues concerning system design and the need for careful integration and management of RETs once installed; and for home owners and operators to understand the characteristics of the technology in their building. Computer simulation tools play a significant role in sustainable building design because, as the modern built environment design (building and systems) becomes more complex, it requires tools to assist in the design process. Chapter twelve gives an overview of the primary benefits and users of simulation programs, the role of simulation in the construction process and examines the validity and interpretation of simulation results. Chapter thirteen particularly focuses on the Computational Fluid Dynamics (CFD) simulation method used for optimisation and performance assessment of technologies and solutions for sustainable building design and its application through a series of cases studies. People and building performance are intimately linked. A better understanding of occupants’ interaction with the indoor environment is essential to building energy and facilities management. Chapter fourteen focuses on the issue of occupant behaviour; principally, its impact, and the influence of building performance on them. Chapter fifteen explores the discipline of facilities management and the contribution that this emerging profession makes to securing sustainable building performance. The chapter highlights a much greater diversity of opportunities in sustainable building design that extends well into the operational life. Chapter sixteen reviews the concepts of modelling information flows and the use of Building Information Modelling (BIM), describing these techniques and how these aspects of information management can help drive sustainability. An explanation is offered concerning why information management is the key to ‘life-cycle’ thinking in sustainable building and construction. Measurement of building performance and sustainability is a key issue in delivering a sustainable built environment. Chapter seventeen identifies the means by which construction materials can be evaluated with respect to their sustainability. It identifies the key issues that impact the sustainability of construction materials and the methodologies commonly used to assess them. Chapter eighteen focuses on the topics of green building assessment, green building materials, sustainable construction and operation. Commonly-used assessment tools such as BRE Environmental Assessment Method (BREEAM), Leadership in Energy and Environmental Design ( LEED) and others are introduced. Chapter nineteen discusses sustainable procurement which is one of the areas to have naturally emerged from the overall sustainable development agenda. It aims to ensure that current use of resources does not compromise the ability of future generations to meet their own needs. Chapter twenty is a best-practice exemplar - the BRE Innovation Park which features a number of demonstration buildings that have been built to the UK Government’s Code for Sustainable Homes. It showcases the very latest innovative methods of construction, and cutting edge technology for sustainable buildings. In summary, Design and Management of Sustainable Built Environment book is the result of co-operation and dedication of individual chapter authors. We hope readers benefit from gaining a broad interdisciplinary knowledge of design and management in the built environment in the context of sustainability. We believe that the knowledge and insights of our academics and professional colleagues from different institutions and disciplines illuminate a way of delivering sustainable built environment through holistic integrated design and management approaches. Last, but not least, I would like to take this opportunity to thank all the chapter authors for their contribution. I would like to thank David Lim for his assistance in the editorial work and proofreading.

A model of the dynamic relationship between blood flow and volume changes during brain activation

The temporal relationship between changes in cerebral blood flow (CBF) and cerebral blood volume (CBV) is important in the biophysical modeling and interpretation of the hemodynamic response to activation, particularly in the context of magnetic resonance imaging and the blood oxygen level-dependent signal. Grubb et al. (1974) measured the steady state relationship between changes in CBV and CBF after hypercapnic challenge. The relationship CBV proportional to CBFPhi has been used extensively in the literature. Two similar models, the Balloon (Buxton et al., 1998) and the Windkessel (Mandeville et al., 1999), have been proposed to describe the temporal dynamics of changes in CBV with respect to changes in CBF. In this study, a dynamic model extending the Windkessel model by incorporating delayed compliance is presented. The extended model is better able to capture the dynamics of CBV changes after changes in CBF, particularly in the return-to-baseline stages of the response.