Adaptation of Rhizobium leguminosarum to pea, alfalfa and sugar beet rhizospheres investigated by comparative transcriptomics

Background The rhizosphere is the microbe-rich zone around plant roots and is a key determinant of the biosphere's productivity. Comparative transcriptomics was used to investigate general and plant-specific adaptations during rhizosphere colonization. Rhizobium leguminosarum biovar viciae was grown in the rhizospheres of pea (its legume nodulation host), alfalfa (a non-host legume) and sugar beet (non-legume). Gene expression data were compared to metabolic and transportome maps to understand adaptation to the rhizosphere. Results Carbon metabolism was dominated by organic acids, with a strong bias towards aromatic amino acids, C1 and C2 compounds. This was confirmed by induction of the glyoxylate cycle required for C2 metabolism and gluconeogenesis in all rhizospheres. Gluconeogenesis is repressed in R. leguminosarum by sugars, suggesting that although numerous sugar and putative complex carbohydrate transport systems are induced in the rhizosphere, they are less important carbon sources than organic acids. A common core of rhizosphere-induced genes was identified, of which 66% are of unknown function. Many genes were induced in the rhizosphere of the legumes, but not sugar beet, and several were plant specific. The plasmid pRL8 can be considered pea rhizosphere specific, enabling adaptation of R. leguminosarum to its host. Mutation of many of the up-regulated genes reduced competitiveness for pea rhizosphere colonization, while two genes specifically up-regulated in the pea rhizosphere reduced colonization of the pea but not alfalfa rhizosphere. Conclusions Comparative transcriptome analysis has enabled differentiation between factors conserved across plants for rhizosphere colonization as well as identification of exquisite specific adaptation to host plants.

Common black coatings - reflectance and ageing characteristics in the 0.32-14.3 mu m wavelength range

The diffuse and regular reflectances of five optically absorbing coatings frequently used in optical systems, were measured over the 0.32-14.3 mu m wavelength range, before and after exposure to heat and intense optical radiation. The measured coatings included Nextel Velvet Black, an anodised coating and NPL Super Black. The anodised coating exhibited substantial variations in its diffuse and regular reflectance values after thermal and simulated solar ageing. Solar and thermal ageing of the Nextel Velvet Black resulted in increases of its reflectance. However, thermal ageing tended to decrease the reflectance of the other paint samples examined. Thermal and solar ageing of the NPL Super Black resulted in only minor changes in its reflectance characteristics. All measurements are traceable to the UK National Standards.

Allelic size standards and reference genotypes to unify international cocoa (Theobroma cacao L.) microsatellite data

Standardisation of microsatellite allele profiles between laboratories is of fundamental importance to the transferability of genetic fingerprint data and the identification of clonal individuals held at multiple sites. Here we describe two methods of standardisation applied to the microsatellite fingerprinting of 429 Theobroma cacao L. trees representing 345 accessions held in the worlds largest Cocoa Intermediate Quarantine facility: the use of a partial allelic ladder through the production of 46 cloned and sequenced allelic standards (AJ748464 to AJ48509), and the use of standard genotypes selected to display a diverse allelic range. Until now a lack of accurate and transferable identification information has impeded efforts to genetically improve the cocoa crop. To address this need, a global initiative to fingerprint all international cocoa germplasm collections using a common set of 15 microsatellite markers is in progress. Data reported here have been deposited with the International Cocoa Germplasm Database and form the basis of a searchable resource for clonal identification. To our knowledge, this is the first quarantine facility to be completely genotyped using microsatellite markers for the purpose of quality control and clonal identification. Implications of the results for retrospective tracking of labelling errors are briefly explored.

The METAFOR project: preserving data through metadata standards for climate models and simulations

Climate modeling is a complex process, requiring accurate and complete metadata in order to identify, assess and use climate data stored in digital repositories. The preservation of such data is increasingly important given the development of ever-increasingly complex models to predict the effects of global climate change. The EU METAFOR project has developed a Common Information Model (CIM) to describe climate data and the models and modelling environments that produce this data. There is a wide degree of variability between different climate models and modelling groups. To accommodate this, the CIM has been designed to be highly generic and flexible, with extensibility built in. METAFOR describes the climate modelling process simply as "an activity undertaken using software on computers to produce data." This process has been described as separate UML packages (and, ultimately, XML schemas). This fairly generic structure canbe paired with more specific "controlled vocabularies" in order to restrict the range of valid CIM instances. The CIM will aid digital preservation of climate models as it will provide an accepted standard structure for the model metadata. Tools to write and manage CIM instances, and to allow convenient and powerful searches of CIM databases,. Are also under development. Community buy-in of the CIM has been achieved through a continual process of consultation with the climate modelling community, and through the METAFOR team’s development of a questionnaire that will be used to collect the metadata for the Intergovernmental Panel on Climate Change’s (IPCC) Coupled Model Intercomparison Project Phase 5 (CMIP5) model runs.

Identification of core and variable components of the Salmonella enterica subspecies I genome by microarray

We have performed microarray hybridization studies on 40 clinical isolates from 12 common serovars within Salmonella enterica subspecies I to identify the conserved chromosomal gene pool. We were able to separate the core invariant portion of the genome by a novel mathematical approach using a decision tree based on genes ranked by increasing variance. All genes within the core component were confirmed using available sequence and microarray information for S. enterica subspecies I strains. The majority of genes within the core component had conserved homologues in Escherichia coli K-12 strain MG1655. However, many genes present in the conserved set which were absent or highly divergent in K-12 had close homologues in pathogenic bacteria such as Shigella flexneri and Pseudomonas aeruginosa. Genes within previously established virulence determinants such as SPI1 to SPI5 were conserved. In addition several genes within SPI6, all of SPI9, and three fimbrial operons (fim, bcf, and stb) were conserved within all S. enterica strains included in this study. Although many phage and insertion sequence elements were missing from the core component, approximately half the pseudogenes present in S. enterica serovar Typhi were conserved. Furthermore, approximately half the genes conserved in the core set encoded hypothetical proteins. Separation of the core and variant gene sets within S. enterica subspecies I has offered fundamental biological insight into the genetic basis of phenotypic similarity and diversity across S. enterica subspecies I and shown how the core genome of these pathogens differs from the closely related E. coli K-12 laboratory strain.

Back to the margins in search of the core: "Foreign Land"'s geography of exclusion

The crisis of the national project in the early 1990s, caused by a short-lived but disastrous government, led Brazilian art cinema, for the first time, to look at itself as periphery and re-approach the old colonial center, Portugal. Terra estrangeira/Foreign Land (Walter Salles & Daniela Thomas, Brazil/Portugal, 1995), a film about Brazilian exiles in Portugal, is the best illustration of this perspective shift which provides a new sense of Brazil’s scale and position within a global context. Shot mainly on location in São Paulo, Lisbon and Cape Verde, it promotes the encounter of Lusophone peoples who find a common ground in their marginal situation. Rather than as a former empire, Portugal is defined by its situation at the edge of Europe and by beliefs such as Sebastianism, whose origins go back to the time when the country was dominated by Spain. As a result, notions of “core” or “center” are devolved to the realm of myth. The film’s carefully crafted dialogue combines Brazilian, Portuguese and Creole linguistic peculiarities into a common dialect of exclusion, while language puns trigger visual rhymes which refer back to the Cinema Novo (the Brazilian New Wave) repertoire and restage the imaginary of the discovery turned into unfulfilled utopia. The main characters also acquire historical resonances, as they are depicted as descendants of Iberian conquistadors turned into smugglers of precious stones in the present. Their activities define a circuit of international exchange which resonates with that of globalized cinema, a realm in which Foreign Land, made up of citations and homage to other cinemas, tries to retrieve a sense of belonging.

Back to the margins in search of the core: foreign land's geography of exclusion

The crisis of the national project in the early 1990s, caused by a short-lived but disastrous government, led Brazilian art cinema, for the first time, to look at itself as periphery and re-approach the old colonial centre, Portugal. Terra estrangeira/Foreign Land (Walter Salles & Daniela Thomas, Brazil/Portugal, 1995), a film about Brazilian exiles in Portugal, is the best illustration of this perspective shift aimed at providing a new sense of Brazil’s scale and position within a global context. Shot mainly on location in São Paulo, Lisbon and Cape Verde, it promotes the encounter of Lusophone peoples who find a common ground in their marginal situation. Even Portugal is defined by its location at the edge of Europe and by beliefs such as Sebastianism, whose origins go back to the time when the country was dominated by Spain. As a result, notions of ‘core’ or ‘centre’ are devolved to the realm of myth. The film’s carefully crafted dialogues combine Brazilian, Portuguese and Creole linguistic peculiarities into a common dialect of exclusion, while language puns trigger visual rhymes which refer back to the Cinema Novo (the Brazilian New Wave) repertoire and restage the imaginary of the discovery turned into unfulfilled utopia. The main characters also acquire historical resonances, as they are depicted as descendants of Iberian conquistadors turned into smugglers of precious stones in the present. Their activities define a circuit of international exchange which resonates with that of globalized cinema, a realm in which Foreign Land, made up of citations and homage to other cinemas, tries to retrieve a sense of belonging.

Language in calculation: A core mechanism?

Although there is evidence that exact calculation recruits left hemisphere perisylvian language systems, recent work has shown that exact calculation can be retained despite severe damage to these networks. In this study, we sought to identify a “core” network for calculation and hence to determine the extent to which left hemisphere language areas are part of this network. We examined performance on addition and subtraction problems in two modalities: one using conventional two-digit problems that can be easily encoded into language; the other using novel shape representations. With regard to numerical problems, our results revealed increased left fronto-temporal activity in addition, and increased parietal activity in subtraction, potentially reflecting retrieval of linguistically encoded information during addition. The shape problems elicited activations of occipital, parietal and dorsal temporal regions, reflecting visual reasoning processes. A core activation common to both calculation types involved the superior parietal lobule bilaterally, right temporal sub-gyral area, and left lateralized activations in inferior parietal (BA 40), frontal (BA 6/8/32) and occipital (BA 18) regions. The large bilateral parietal activation could be attributed to visuo-spatial processing in calculation. The inferior parietal region, and particularly the left angular gyrus, was part of the core calculation network. However, given its activation in both shape and number tasks, its role is unlikely to reflect linguistic processing per se. A possibility is that it serves to integrate right hemisphere visuo-spatial and left hemisphere linguistic and executive processing in calculation.

Dominant components of the Thoroughbred metabolome characterised by 1H‐NMR spectroscopy: a metabolite atlas of common biofluids

Summary Reasons for performing study: Metabonomics is emerging as a powerful tool for disease screening and investigating mammalian metabolism. This study aims to create a metabolic framework by producing a preliminary reference guide for the normal equine metabolic milieu. Objectives: To metabolically profile plasma, urine and faecal water from healthy racehorses using high resolution 1H-NMR spectroscopy and to provide a list of dominant metabolites present in each biofluid for the benefit of future research in this area. Study design: This study was performed using seven Thoroughbreds in race training at a single time-point. Urine and faecal samples were collected non-invasively and plasma was obtained from samples taken for routine clinical chemistry purposes. Methods: Biofluids were analysed using 1H-NMR spectroscopy. Metabolite assignment was achieved via a range of 1D and 2D experiments. Results: A total of 102 metabolites were assigned across the three biological matrices. A core metabonome of 14 metabolites was ubiquitous across all biofluids. All biological matrices provided a unique window on different aspects of systematic metabolism. Urine was the most populated metabolite matrix with 65 identified metabolites, 39 of which were unique to this biological compartment. A number of these were related to gut microbial host co-metabolism. Faecal samples were the most metabolically variable between animals; acetate was responsible for the majority (28%) of this variation. Short chain fatty acids were the predominant features identified within this biofluid by 1H-NMR spectroscopy. Conclusions: Metabonomics provides a platform for investigating complex and dynamic interactions between the host and its consortium of gut microbes and has the potential to uncover markers for health and disease in a variety of biofluids. Inherent variation in faecal extracts along with the relative abundance of microbial-mammalian metabolites in urine and invasive nature of plasma sampling, infers that urine is the most appropriate biofluid for the purposes of metabonomic analysis.

Interactive learning in UK construction practice: examining the role of BIM process standards

From a construction innovation systems perspective, firms acquire knowledge from suppliers, clients, universities and institutional environment. Building information modelling (BIM) involves these firms using new process standards. To understand the implications on interactive learning using BIM process standards, a case study is conducted with the UK operations of a multinational construction firm. Data is drawn from: a) two workshops involving the firm and a wider industry group, b) observations of practice in the BIM core team and in three ongoing projects, c) 12 semi-structured interviews; and d) secondary publications. The firm uses a set of BIM process standards (IFC, PAS 1192, Uniclass, COBie) in its construction activities. It is also involved in a pilot to implement the COBie standard, supported by technical and management standards for BIM, such as Uniclass and PAS1192. Analyses suggest that such BIM process standards unconsciously shapes the firm's internal and external interactive learning processes. Internally standards allow engineers to learn from each through visualising 3D information and talking around designs with operatives to address problems during construction. Externally, the firm participates in trial and pilot projects involving other construction firms, government agencies, universities and suppliers to learn about the standard and access knowledge to solve its specific design problems. Through its BIM manager, the firm provides feedback to standards developers and information technology suppliers. The research contributes by articulating how BIM process standards unconsciously change interactive learning processes in construction practice. Further research could investigate these findings in the wider UK construction innovation system.