Mineral and geochemical characterization of a leptic aluandic soil and a thapto aluandic-ferralsol developed on trachytes in Mount Bambouto (Cameroon volcanic line)

Mineral and geochemical investigations were carried out on soil samples and fresh rock (trachytes) from two selected soil profiles (TM profile on leptic aluandic soils and TL profile on thapto aluandic-ferralsols) from Mount Bambouto to better understand geochemical processes and mineral paragenesis involved in the development of soils in this environment. In TM profile, the hydrated halloysites and goethite occur in the weathered saprolite boulders of BC horizon while dehydrated halloysite, gibbsite and goethite dominate the soils matrices of BC and A horizons. In TL profile, the dehydrated halloysites and goethite are the most abundant secondary minerals in the weathered saprolites of C and BC horizons while gibbsite, hematite and kaolinite occur in the soil matrices of BC, B and A horizons. The highest gibbsite content is in the platy nodules of B horizon. In both soil profiles, organo-metal complexes (most likely of AI and Fe) are present in the surface A horizon. Geochemically, between the fresh rock and the weathered saprolites in both soils, SiO2, K2O, CaO, Na2O and MgO contents decrease strongly while Fe2O3 and Al2O3 tend to accumulate. The molar ratio of SiO2/Al2O3 (Ki) and the sum of Ca, Mg, K and Na ions (TRB) also decreases abruptly between fresh rocks and the weathered saprolites, but increases significantly at the soil surface. The TM profile shows intense Al enrichment whereas the TL profile highlights enrichment in both AI and Fe as the weathering progresses upwards. Both soil profiles are enriched in Ni, Cu, Ba and Co and depleted in U, Th, Ta, Hf, Y, Sr, Pb, Zr and Zn relative to fresh rock. They also show a relatively low fractionation of the rare earth elements (REE: La, Nd, Sm, Eu, Tb, Yb and Lu), except for Ce which tends to be enriched in soils compared to CI chondrite. All these results give evidence of intense hydrolysis at soil deep in Mount Bambouto resulting in the formation of halloysite which progressively transforms into gibbsite and/or dehydrated halloysite. At the soil surface, the prominent pedogenetic process refers to andosolization with formation of organo-metal complexes. In TL profile, the presence of kaolinite in soil matrices BC and B horizons is consistent with ferralitization at soil deep. In conclusion, soil forming processes in Mount Bambouto are strongly influenced by local climate: (i) in the upper mountain (>2000 m), the fresh, misty and humid climate favors andosolization; whereas (ii) in the middle lands (1700-2000 m) with a relatively dry climate, both andosolization at the soil surface and ferralitization at soil deep act together. (C) 2009 Elsevier B.V. All rights reserved.

Articulation of stakeholders requirements for complex e-government systems development

Requirements analysis focuses on stakeholders concerns and their influence towards e-government systems. Some characteristics of stakeholders concerns clearly show the complexity and conflicts. This imposes a number of questions in the requirements analysis, such as how are they relevant to stakeholders? What are their needs? How conflicts among the different stakeholders can be resolved? And what coherent requirements can be methodologically produced? This paper describes the problem articulation method in organizational semiotics which can be used to conduct such complex requirements analysis. The outcomes of the analysis enable e-government systems development and management to meet userspsila needs. A case study of Yantai Citizen Card is chosen to illustrate a process of analysing stakeholders in the lifecycle of requirements analysis.

A lower bound on the size of k-neighborhood in generalized cubes

The determination of the minimum size of a k-neighborhood (i.e., a neighborhood of a set of k nodes) in a given graph is essential in the analysis of diagnosability and fault tolerance of multicomputer systems. The generalized cubes include the hypercube and most hypercube variants as special cases. In this paper, we present a lower bound on the size of a k-neighborhood in n-dimensional generalized cubes, where 2n + 1 <= k <= 3n - 2. This lower bound is tight in that it is met by the n-dimensional hypercube. Our result is an extension of two previously known results. (c) 2005 Elsevier Inc. All rights reserved.

Shear banding in molecular dynamics of polymer melts

In order to establish constitutive equations for a viscoelastic fluid uniform shear flow is usually required. However, in the last 10 years S. Q. Wang and co-workers have demonstrated that some entangled polymers do not flow with the uniform shear rate as usually assumed, but instead choose to separate into fast and slow flowing regions. This phenomenon, known as shear banding, causes flow instabilities and in principle invalidates all rheological measurements when it occurs. In this Letter we report the first observation of shear banding in molecular dynamics simulations of entangled polymer melts. We show that our observations are in a very good agreement with the phenomenology developed by Fielding and Olmsted. Our findings provide a simple way of validating the empirical macroscopic phenomenology of shear banding. © 2012 American Physical Society

Volume-based size distribution of accumulation and coarse particles (PM0.1–10) from cooking fume during oil heating

Particulate matter generated during the cooking process has been identified as one of the major problems of indoor air quality and indoor environmental health. Reliable assessment of exposure to cooking-generated particles requires accurate information of emission characteristics especially the size distribution. This study characterizes the volume/mass-based size distribution of the fume particles at the oil-heating stage for the typical Chinese-style cooking in a laboratory kitchen. A laser-diffraction size analyzer is applied to measure the volume frequency of fume particles ranged from 0.1 to 10 μm, which contribute to most mass proportion in PM2.5 and PM10. Measurements show that particle emissions have little dependence on the types of vegetable oil used but have a close relationship with the heating temperature. It is found that volume frequency of fume particles in the range of 1.0–4.0 μm accounts for nearly 100% of PM0.1–10 with the mode diameter 2.7 μm, median diameter 2.6 μm, Sauter mean diameter 3.0 μm, DeBroukere mean diameter 3.2 μm, and distribution span 0.48. Such information on emission characteristics obtained in this study can be possibly used to improve the assessment of indoor air quality due to PM0.1–10 in the kitchen and residential flat.

A review of the performance of different ventilation and airflow distribution systems in buildings

The objective of this article is to review the scientific literature on airflow distribution systems and ventilation effectiveness to identify and assess the most suitable room air distribution methods for various spaces. In this study, different ventilation systems are classified according to specific requirements and assessment procedures. This study shows that eight ventilation methods have been employed in the built environment for different purposes and tasks. The investigation shows that numerous studies have been carried out on ventilation effectiveness but few studies have been done regarding other aspects of air distribution. Amongst existing types of ventilation systems, the performance of each ventilation methods varies from one case to another due to different usages of the ventilation system in a room and the different assessment indices used. This review shows that the assessment of ventilation effectiveness or efficiency should be determined according to each task of the ventilation system, such as removal of heat, removal of pollutant, supply fresh air to the breathing zone or protecting the occupant from cross infection. The analysis results form a basic framework regarding the application of airflow distribution for the benefit of designers, architects, engineers, installers and building owners.

Study of picosecond processes of an intercalated dipyridophenazine Cr(iii) complex bound to defined sequence DNAs using transient absorption and time-resolved infrared methods

Picosecond transient absorption (TA) and time-resolved infrared (TRIR) measurements of rac-[Cr(phen)2(dppz)]3+ (1) intercalated into double-stranded guanine-containing DNA reveal that the excited state is very rapidly quenched. As no evidence was found for the transient electron transfer products, it is proposed that the back electron transfer reaction must be even faster (<3 ps).

Simulating startup shear of entangled polymer melts

Start-up shear rheology is a standard experiment used for characterizing polymer flow, and to test various models of polymer dynamics. A rich phenomenology is developed for behavior of entangled monodisperse linear polymers in such tests, documenting shear stress overshoots as a function of shear rates and molecular weights. A tube theory does a reasonable qualitative job at describing these phenomena, although it involves several drastic approximations and the agreement can be fortuitous. Recently, Lu and coworkers published several papers [e.g. Lu {\it et al.} {\it ACS Macro Lett}. 2014, 3, 569-573] reporting results from molecular dynamics simulations of linear entangled polymers, which contradict both theory and experiment. Based on these observations, they made very serious conclusions about the tube theory, which seem to be premature. In this letter, we repeat simulations of Lu {\it et al.} and systematically show that neither their simulation results, nor their comparison with theory are confirmed.

Large deviations of Rouse polymer chain: first passage problem

The purpose of this paper is to investigate several analytical methods of solving first passage (FP) problem for the Rouse model, a simplest model of a polymer chain. We show that this problem has to be treated as a multi-dimensional Kramers' problem, which presents rich and unexpected behavior. We first perform direct and forward-flux sampling (FFS) simulations, and measure the mean first-passage time $\tau(z)$ for the free end to reach a certain distance $z$ away from the origin. The results show that the mean FP time is getting faster if the Rouse chain is represented by more beads. Two scaling regimes of $\tau(z)$ are observed, with transition between them varying as a function of chain length. We use these simulations results to test two theoretical approaches. One is a well known asymptotic theory valid in the limit of zero temperature. We show that this limit corresponds to fully extended chain when each chain segment is stretched, which is not particularly realistic. A new theory based on the well known Freidlin-Wentzell theory is proposed, where dynamics is projected onto the minimal action path. The new theory predicts both scaling regimes correctly, but fails to get the correct numerical prefactor in the first regime. Combining our theory with the FFS simulations lead us to a simple analytical expression valid for all extensions and chain lengths. One of the applications of polymer FP problem occurs in the context of branched polymer rheology. In this paper, we consider the arm-retraction mechanism in the tube model, which maps exactly on the model we have solved. The results are compared to the Milner-McLeish theory without constraint release, which is found to overestimate FP time by a factor of 10 or more.

Dystrophin analysis using a panel of anti-dystrophin antibodies in Duchenne and Becker muscular dystrophy.

Dystrophin, the protein product of the Duchenne muscular dystrophy (DMD) gene, was studied in 19 patients with Xp21 disorders and in 25 individuals with non-Xp21 muscular dystrophy. Antibodies raised to seven different regions spanning most of the protein were used for immunocytochemistry. In all patients specific dystrophin staining anomalies were detected and correlated with clinical severity and also gene deletion. In patients with Becker muscular dystrophy (BMD) the anomalies detected ranged from inter- and intra-fibre variation in labelling intensity with the same antibody or several antibodies to general reduction in staining and discontinuous staining. In vitro evidence of abnormal dystrophin breakdown was observed reanalysing the muscle of patients, with BMD and not that of non-Xp21 dystrophies, after it has been stored for several months. A number of patients with DMD showed some staining but this did not represent a diagnostic problem. Based on the data presented, it was concluded that immunocytochemistry is a powerful technique in the prognostic diagnosis of Xp21 muscular dystrophies.

PKC-dependent activation of p46/p54 JNKs during ischemic preconditioning in conscious rabbits.

A conscious rabbit model was used to study the effect of ischemic preconditioning (PC) on stress-activated kinases [c-Jun NH(2)-terminal kinases (JNKs) and p38 mitogen-activated protein kinase (MAPK)] in an environment free of surgical trauma and attending external stress. Ischemic PC (6 cycles of 4-min ischemia/4-min reperfusion) induced significant activation of protein kinase C (PKC)-epsilon in the particulate fraction, which was associated with activation of p46 JNK in the nuclear fraction and p54 JNK in the cytosolic fraction; all of these changes were completely abolised by the PKC inhibitor chelerythrine. Selective enhancement of PKC-epsilon activity in adult rabbit cardiac myocytes resulted in enhanced activity of p46/p54 JNKs, providing direct in vitro evidence that PKC-epsilon is coupled to both kinases. Studies in rabbits showed that the activation of p46 JNK occurred during ischemia, whereas that of p54 JNK occurred after reperfusion. A single 4-min period of ischemia induced a robust activation of the p38 MAPK cascade, which, however, was attenuated after 5 min of reperfusion and disappeared after six cycles of 4-min ischemia/reperfusion. Overexpression of PKC-epsilon in cardiac myocytes failed to increase the p38 MAPK activity. These results demonstrate that ischemic PC activates p46 and p54 JNKs via a PKC-epsilon-dependent signaling pathway and that there are important differences between p46 and p54 JNKs with respect to the subcellular compartment (cytosolic vs. nuclear) and the mechanism (ischemia vs. reperfusion) of their activation after ischemic PC.