Effects of endogenous flour lipids on the quality of semisweet biscuits

Fractionation and reconstitution techniques were used to study the contribution of enclogenous flour lipids to the quality of semisweet (Rich Tea-type) biscuits. Biscuit flour was defatted with chloroform and baked with bakery fat but without enclogenous lipid addition. Semisweet biscuits baked from defatted flour were flatter, denser, and harder and showed collapse of gas cells during baking when compared with control biscuits. Defatted flour semisweet doughs exhibited a different rheological behavior from the control samples showing higher storage and loss moduli (G' and G" values), that is, high viscoelasticity. Functionality was restored when total nonstarch flour lipids were added back to defatted flour. Both the polar and nonpolar lipid fractions had positive effects in restoring flour quality, but the polar lipid fraction was of greatest benefit. Both fractions were needed for complete restoration of both biscuit quality and dough rheological characteristics.

Effects of endogenous flour lipids on the quality of short-dough biscuits

Fractionation and reconstitution techniques were used to study the contribution of endogenous flour lipids to the quality of short-dough (shortcake type) biscuits. Biscuit flour was defatted with chloroform and baked with bakery fat, but without endogenous lipid. Short-dough biscuits baked from defatted flour had smaller diameters, and were flatter, denser and harder than control biscuits. Defatted flour shortcake doughs exhibited different rheological behaviour from the control samples, showing higher storage and loss moduli (G' and G" values), ie higher viscoelasticity. Functionality was restored when total non-starch flour lipids were added back to defatted flour. The polar lipid fraction had a positive effect in restoring flour quality whereas the non-polar lipid fraction had no effect. Both fractions were needed for complete restoration of both biscuit quality and dough rheological characteristics. A study of the microstructure of defatted biscuits revealed that their gluten protein was more hydrated and developed than the gluten of the control biscuits. This conclusion was supported by the higher water absorption of the defatted gluten. (C) 2004 Society of Chemical Industry.

The effect of macro and micro-nutrient fortification of biscuits on their sensory properties and on hedonic liking of older people

BACKGROUND: Under-nutrition in older adults is widespread. Oral nutritional supplement beverages (ONS) are prescribed, yet consumption by older people is often insufficient. A variety of supplement formats may improve nutrient intake. This study developed protein and micro-nutrient fortified biscuits and evaluated their sensory attributes and liking by older people. Two micro-nutrient strategies were taken, to match typical ONS and to customise to the needs of older people. RESULTS: Oat biscuits and gluten-free biscuits developed contained over 12% protein and over 460 kcal 100 g-1 . Two small (40 g) biscuits developed to match ONS provided approximately 40% of an ONS portion of micro-nutrients and 60% of macro-nutrients; however, the portion size was considered realistic whereas the average ONS portion (200 mL) is excessive. Biscuits developed to the needs of older adults provided, on average, 18% of the reference nutrient intake of targeted micro-nutrients. Sensory characteristics were similar between biscuits with and without micro-nutrient fortification, leading to no differences in liking. Fortified oat biscuits were less liked than commercial oat biscuits, partly attributed to flavour imparted by whey protein fortification. CONCLUSION: Macro- and micro-nutrient fortification of biscuits could provide an alternative fortified snack to help alleviate malnutrition in older adults.

The First World War in biscuits

This is a mixed-media exhibition incorporating objects, sound and film, and drawing on archives held at Reading Museum and MERL. It focuses on the role of the Huntley and Palmers biscuit factory in Reading during the First World War.

Effect of fat replacement by inulin on textural and structural properties of short dough biscuits

The aim of this study was to evaluate the effects of inulin as fat replacer on short dough biscuits and their corresponding doughs. A control formulation, with no replacement, and four formulations in which 10, 20, 30, and 40 % of shortening was replaced by inulin were studied. In the dough, shortening was observed surrounding flour components. At higher fat replacement levels, flour was more available for hydration leading to significant (P<0.05) harder doughs: from 2.76 (0.12)N in 10 % fat-replaced biscuits to 5.81 (1.56)N in 30 % fat-replaced ones. Biscuit structure was more continuous than dough structure. A continuous fat layer coated the matrix surface, where starch granules were embedded. In general, weight loss during baking and water activity decreased significantly (P<0.05) as fat replacement increased. Biscuit dimensions and aeration decreased when fat replacement increased, e.g., width gain was +1.20 mm in 10 fat-replaced biscuits and only +0.32 mm in 40 % fat-replaced ones. Panelist found biscuits with 20 % of fat replacement slightly harder than control biscuits. It can be concluded that shortening may be partially replaced, up to 20 %, with inulin. These low fat biscuits are similar than the control biscuits, and they can have additional health benefits derived from inulin presence.

LIPGENE food-exchange model for alteration of dietary fat quantity and quality in free-living participants from eight European countries

Controlled human intervention trials are required to confirm the hypothesis that dietary fat quality may influence insulin action. The aim was to develop a food-exchange model, suitable for use in free-living volunteers, to investigate the effects of four experimental diets distinct in fat quantity and quality: high SFA (HSFA); high MUFA (HMUFA) and two low-fat (LF) diets, one supplemented with 1.24g EPA and DHA/d (LFn-3). A theoretical food-exchange model was developed. The average quantity of exchangeable fat was calculated as the sum of fat provided by added fats (spreads and oils), milk, cheese, biscuits, cakes, buns and pastries using data from the National Diet and Nutrition Survey of UK adults. Most of the exchangeable fat was replaced by specifically designed study foods. Also critical to the model was the use of carbohydrate exchanges to ensure the diets were isoenergetic. Volunteers from eight centres across Europe completed the dietary intervention. Results indicated that compositional targets were largely achieved with significant differences in fat quantity between the high-fat diets (39.9 (SEM 0.6) and 38.9 (SEM 0.51) percentage energy (%E) from fat for the HSFA and HMUFA diets respectively) and the low-fat diets (29.6 (SEM 0.6) and 29.1 (SEM 0.5) %E from fat for the LF and LFn-3 diets respectively) and fat quality (17.5 (SEM 0.3) and 10.4 (SEM 0.2) %E front SFA and 12.7 (SEM 0.3) and 18.7 (SEM 0.4) %E MUFA for the HSFA and HMUFA diets respectively). In conclusion, a robust, flexible food-exchange model was developed and implemented successfully in the LIPGENE dietary intervention trial.

Cholesterol reduction using manufactured foods high in monounsaturated fatty acids: a randomized crossover study

In two separate studies, the cholesterol-lowering efficacy of a diet high in monounsaturated fatty acids (MUFA) was evaluated by means of a randomized crossover trial. In both studies subjects were randomized to receive either a high-MUFA diet or the control diet first, which they followed for a period of 8 weeks; following a washout period of 4–6 weeks they were transferred onto the opposing diet for a further period of 8 weeks. In one study subjects were healthy middle-aged men (n 30), and in the other they were young men (n 23) with a family history of CHD recruited from two centres (Guildford and Dublin). The two studies were conducted over the same time period using identical foods and study designs. Subjects consumed 38% energy as fat, with 18% energy as MUFA and 10% as saturated fatty acids (MUFA diet), or 13% energy as MUFA and 16% as saturated fatty acids (control diet). The polyunsaturated fatty acid content of each diet was 7%. The diets were achieved by providing subjects with manufactured foods such as spreads, ‘ready meals’, biscuits, puddings and breads, which, apart from their fatty acid compositions, were identical for both diets. Subjects were blind to which of the diets they were following on both arms of the study. Weight changes on the diets were less than 1 kg. In the groups combined (n 53) mean total and LDL-cholesterol levels were significantly lower at the end of the MUFA diet than the control diet by 0×29 (SD 0×61) mmol/l (P,0×001) and 0×38 (SD 0×64) mmol/l (P, 0×0001) respectively. In middle-aged men these differences were due to a mean reduction in LDL-cholesterol of ¹11 (SD 12) % on the MUFA diet with no change on the control diet (¹1×1 (SD 10) %). In young men the differences were due to an increase in LDL-cholesterol concentration on the control diet of þ6×2 (SD 13) % and a decrease on the MUFA diet of ¹7×8 (SD 20) %. Differences in the responses of middle-aged and young men to the two diets did not appear to be due to differences in their habitual baseline diets which were generally similar, but appeared to reflect the lower baseline cholesterol concentrations in the younger men. There was a moderately strong and statistically significant inverse correlation between the change in LDLcholesterol concentration on each diet and the baseline fasting LDL-cholesterol concentration (r¹0×49; P,0×0005). In conclusion, diets in which saturated fat is partially replaced by MUFA can achieve significant reductions in total and LDL-cholesterol concentrations, even when total fat and energy intakes are maintained. The dietary approach used to alter fatty acid intakes would be appropriate for achieving reductions in saturated fat intakes in whole populations.

Substitution of dietary monounsaturated fatty acids for saturated fatty acids in a free-living population: a feasibility study

The fatty acid composition of the diet of seven free-living subjects (five men and two women) aged 41–56 years was altered for 1 month. The aim was to increase the intake of monounsaturated fatty acids (MUFAs) from subjects current habitual levels of 12% dietary energy to a target intake of 18% dietary energy, and to decrease saturated fatty acid (SFA) from habitual levels of 16% dietary energy to target levels of 10% dietary energy. The change in fatty acid intake was achieved by supplying volunteers with foods prepared using MUFA-containing spreads or olive oil (ready meals, sweet biscuits and cakes) and also by supplying spreads, cooking oil and MUFA-enriched milk for domestic use. Body weight and plasma total cholesterol measurements were made at baseline and at 2 and 4 weeks on the diet as an aid to maintaining subject compliance. MUFA consumption was significantly increased from 12% dietary energy to 16% dietary energy (P<0.01), and SFA intake was reduced from 16% dietary energy to 6% dietary energy (P<0.01) during the 4-week intervention. The diet failed to achieve the target increase in MUFA but exceeded the target reduction in SFA. This was due to the fact that subjects reduced their total fat intake from a mean habitual level of 38% dietary energy to a mean level of 30% dietary energy. During the dietary period, mean plasma cholesterol levels were lower at 2 weeks (P<0.01) and at 4 weeks (P<0.01) than the baseline, with a mean reduction of 20% over the dietary period. This study demonstrates the difficulty of achieving increased MUFA intakes (by SFA substitution) in free-living populations when only a limited range of fatty-acid modified food products are provided to volunteers.

Control of final moisture content of food products baked in continuous tunnel ovens

There are well-known difficulties in making measurements of the moisture content of baked goods (such as bread, buns, biscuits, crackers and cake) during baking or at the oven exit; in this paper several sensing methods are discussed, but none of them are able to provide direct measurement with sufficient precision. An alternative is to use indirect inferential methods. Some of these methods involve dynamic modelling, with incorporation of thermal properties and using techniques familiar in computational fluid dynamics (CFD); a method of this class that has been used for the modelling of heat and mass transfer in one direction during baking is summarized, which may be extended to model transport of moisture within the product and also within the surrounding atmosphere. The concept of injecting heat during the baking process proportional to the calculated heat load on the oven has been implemented in a control scheme based on heat balance zone by zone through a continuous baking oven, taking advantage of the high latent heat of evaporation of water. Tests on biscuit production ovens are reported, with results that support a claim that the scheme gives more reproducible water distribution in the final product than conventional closed loop control of zone ambient temperatures, thus enabling water content to be held more closely within tolerance.