Warranty cost analysis for products with a dormant state

Most building services products are installed while a building is constructed, but they are not operated until the building is commissioned. The warranty of the products may cover the time starting from their installation to the end of the warranty period. Prior to the commissioning of the building, the products are at a dormant mode (i.e., not operated) but protected by the warranty. For such products, both the usage intensity and the failure patterns are different from those with continuous usage intensity and failure patterns. This paper develops warranty cost models for repairable products with a dormant mode from both the manufacturer's and buyer's perspectives. Relationships between the failure patterns at the dormant mode and at the operational mode are also discussed. Numerical examples and sensitivity analysis are used to demonstrate the applicability of the methodology derived in the paper.

Willingness to pay for contagious bovine pleuropneumonia vaccination in Narok South District of Kenya

Contagious bovine pleuropneumonia (CBPP) is an economically important trans-boundary cattle disease which affects food security and livelihoods. A conjoint analysis–contingent valuation was carried out on 190 households in Narok South District of Kenya to measure willingness to pay (WTP) and demand for CBPP vaccine and vaccination as well as factors affecting WTP. The mean WTP was calculated at Kenya Shillings (KSh) 212.48 (USD 3.03) for vaccination using a vaccine with the characteristics that were preferred by the farmers (preferred vaccine and vaccination) and KSh −71.45 (USD −1.02) for the currently used vaccine and vaccination. The proportion of farmers willing to pay an amount greater than zero was 66.7% and 34.4% for the preferred and current vaccine and vaccination respectively. About one third (33.3%) of farmers would need to be compensated an average amount of KSh 1162.62 (USD 13.68) per animal to allow their cattle to be vaccinated against CBPP using the preferred vaccine and vaccination. About two-thirds (65.6%) of farmers would need to be compensated an average amount of KSh 853.72 (USD 12.20) per animal to allow their cattle to be vaccinated against CBPP using the current vaccine and vaccination. The total amount of compensation would be KSh 61.39 million (USD 0.88 million) for the preferred vaccine and vaccination and KSh 90.15 million (USD 1.29 million) for the current vaccine and vaccination. Demand curves drawn from individual WTP demonstrated that only 59% and 27% of cattle owners with a WTP greater than zero were willing to pay a benchmark cost of KSh 34.60 for the preferred and current vaccine respectively. WTP was negatively influenced by the attitude about household economic situation (p = 0.0078), presence of cross breeds in the herd (p < 0.0001) and years since CBPP had been experienced in the herd (p = 0.0375). It was positively influenced by education (p = 0.0251) and the practice of treating against CBPP (p = 0.0432). The benefit cost ratio (BCR) for CBPP vaccination was 2.9–6.1 depending on the vaccination programme. In conclusion, although a proportion of farmers was willing to pay, participation levels may be lower than those required to interrupt transmission of CBPP. Households with characteristics that influence WTP negatively need persuasion to participate in CBPP vaccination. It is economically worthwhile to vaccinate against CBPP. A benefit cost analysis (BCA) using aggregated WTP as benefits can be used as an alternative method to the traditional BCA which uses avoided production losses (new revenue) and costs saved as benefits.

Terrestrial carnivores and human food production: impact and management

1. The production of food for human consumption has led to an historical and global conflict with terrestrial carnivores, which in turn has resulted in the extinction or extirpation of many species, although some have benefited. At present, carnivores affect food production by: (i) killing human producers; killing and/or eating (ii) fish/shellfish; (iii) game/wildfowl; (iv) livestock; (v) damaging crops; (vi) transmitting diseases; and (vii) through trophic interactions with other species in agricultural landscapes. Conversely, carnivores can themselves be a source of dietary protein (bushmeat). 2. Globally, the major areas of conflict are predation on livestock and the transmission of rabies. At a broad scale, livestock predation is a customary problem where predators are present and has been quantified for a broad range of carnivore species, although the veracity of these estimates is equivocal. Typically, but not always, losses are small relative to the numbers held, but can be a significant proportion of total livestock mortality. Losses experienced by producers are often highly variable, indicating that factors such as husbandry practices and predator behaviour may significantly affect the relative vulnerability of properties in the wider landscape. Within livestock herds, juvenile animals are particularly vulnerable. 3. Proactive and reactive culling are widely practised as a means to limit predation on livestock and game. Historic changes in species' distributions and abundance illustrate that culling programmes can be very effective at reducing predator density, although such substantive impacts are generally considered undesirable for native predators. However, despite their prevalence, the effectiveness, efficiency and the benefit:cost ratio of culling programmes have been poorly studied. 4. A wide range of non-lethal methods to limit predation has been studied. However, many of these have their practical limitations and are unlikely to be widely applicable. 5. Lethal approaches are likely to dominate the management of terrestrial carnivores for the foreseeable future, but animal welfare considerations are increasingly likely to influence management strategies. The adoption of non-lethal approaches will depend upon proof of their effectiveness and the willingness of stakeholders to implement them, and, in some cases, appropriate licensing and legislation. 6. Overall, it is apparent that we still understand relatively little about the importance of factors affecting predation on livestock and how to manage this conflict effectively. We consider the following avenues of research to be essential: (i) quantified assessments of the loss of viable livestock; (ii) landscape-level studies of contiguous properties to quantify losses associated with variables such as different husbandry practices; (iii) replicated experimental manipulations to identify the relative benefit of particular management practices, incorporating (iv) techniques to identify individual predators killing stock; and (v) economic analyses of different management approaches to quantify optimal production strategies.

Decision making for HVAC&R system selection for a typical office building in the UK

Demands for thermal comfort, better indoor air quality together with lower environmental impacts have had ascending trends in the last decade. In many circumstances, these demands could not be fully covered through the soft approach of bioclimatic design like optimisation of the building orientation and internal layout. This is mostly because of the dense urban environment and building internal energy loads. In such cases, heating, ventilation, air-conditioning and refrigeration (HVAC&R) systems make a key role to fulfill the requirements of indoor environment. Therefore, it is required to select the most proper HVAC&R system. In this study, a robust decision making approach for HVAC&R system selection is proposed. Technical performance, economic aspect and environmental impacts of 36 permutations of primary and secondary systems are taken into account to choose the most proper HVAC&R system for a case study office building. The building is a representative for the dominant form of office buildings in the UK. Dynamic performance evaluation of HVAC&R alternatives using TRNSYS package together with life cycle energy cost analysis provides a reliable basis for decision making. Six scenarios broadly cover the decision makers' attitudes on HVAC&R system selection which are analysed through Analytical Hierarchy Process (AHP). One of the significant outcomes reveals that, despite both the higher energy demand and more investment requirements associated with compound heating, cooling and power system (CCHP); this system is one of the top ranked alternatives due to the lower energy cost and C02 emissions. The sensitivity analysis reveals that in all six scenarios, the first five top ranked alternatives are not changed. Finally, the proposed approach and the results could be used by researchers and designers especially in the early stages of a design process in which all involved bodies face the lack of time, information and tools for evaluation of a variety of systems.

Enhanced three-factor security protocol for consumer USB mass storage devices

The Universal Serial Bus (USB) is an extremely popular interface standard for computer peripheral connections and is widely used in consumer Mass Storage Devices (MSDs). While current consumer USB MSDs provide relatively high transmission speed and are convenient to carry, the use of USB MSDs has been prohibited in many commercial and everyday environments primarily due to security concerns. Security protocols have been previously proposed and a recent approach for the USB MSDs is to utilize multi-factor authentication. This paper proposes significant enhancements to the three-factor control protocol that now makes it secure under many types of attacks including the password guessing attack, the denial-of-service attack, and the replay attack. The proposed solution is presented with a rigorous security analysis and practical computational cost analysis to demonstrate the usefulness of this new security protocol for consumer USB MSDs.

A cost-benefit analysis of culling badgers to control bovine tuberculosis

Bovine tuberculosis (TB) is an important economic problem. The incidence of TB in cattle herds has steadily risen in the UK, and badgers are strongly implicated in spreading disease. Since the mid-1970s the UK government has adopted a number of badger culling strategies to attempt to reduce infection in cattle. In this report, an established model has been used to simulate TB in badgers, transmission to cattle, and control by badger culling. Costs were supplied by the UK Government's Department for Environment Food and Rural Affairs (Defra) for badger trapping and gassing. Regardless of culling intensity or area simulated, an overall reduction in the herd breakdown rate was seen. With a high culling efficacy and no social perturbation, the mean Net Present Value of a few simulated culling strategies in an "ideal world" was positive, meaning the economic benefits outweighed the costs. Further work is required before these results could be considered definitive, as it is necessary to evaluate uncertainties and simulate less than perfect conditions. (c) 2005 Elsevier Ltd. All rights reserved.

Cost-benefit analysis model of badger (Meles meles) culling to reduce cattle herd tuberculosis breakdowns in Britain, with particular reference to badger perturbation

Bovine tuberculosis (TB)is an important economic disease. Badgers (Meles meles) are the wildlife source implicated in many cattle outbreaks of TB in Britain, and extensive badger control is a controversial option to reduce the disease. A badger and cattle population model was developed, simulating TB epidemiology; badger ecology, including postcull social perturbation; and TB-related farm management. An economic cost-benefit module was integrated into the model to assess whether badger control offers economic benefits. Model results strongly indicate that although, if perturbation were restricted, extensive badger culling could reduce rates in cattle, overall an economic loss would be more likely than a benefit. Perturbation of the badger population was a key factor determining success or failure of control. The model highlighted some important knowledge gaps regarding both the spatial and temporal characteristics of perturbation that warrant further research.

Multiple-project discount rates for cost-benefit analysis in construction projects: A formal risk model for microgeneration renewable energy technologies

The traditional economic approach for appraising the costs and benefits of construction project Net Present Values involves the calculation of net returns for each investment option under different discount rates. An alternative approach consists of multiple-project discount rates based on risk modelling. The example of a portfolio of microgeneration renewable energy technology (MRET) is presented to demonstrate that risks and future available budget for re-investment can be taken into account when setting discount rates for construction project specifications in presence of uncertainty. A formal demonstration is carried out through a reversed intertemporal approach of applied general equilibrium. It is demonstrated that risk and the estimated available budget for future re-investment can be included in the simultaneous assessment of the costs and benefits of multiple projects.

Spatial-temporal aspects of cost-benefit analysis for park management: an example from Khao Yai National Park, Thailand

Using a model calibrated to Khao Yai National Park in Thailand, this paper highlights the importance of generating explicitly spatial and temporal data for developing management plans for tropical protected forests. Spatial and temporal cost-benefit analysis should account for the interactions between different land uses – such as the benefits of contiguous areas of preserved land and edge effects – and the realities of villagers living near forests who rely on extracted resources. By taking a temporal perspective, this paper provides a rare empirical assessment of the importance of quasi-option values when determining optimal management plans.

Cost-benefit analysis

Over the past 30 years, cost–benefit analysis (CBA) has been applied to various areas of public policies and projects. The aim of this essay is to describe the origins of CBA, classify typologies of costs and benefits, define efficiency under CBA and discuss issues associated with the use of a microeconomic tool in macroeconomic contexts.