Chemical composition and fermentation characteristics of grain and different parts of the stover from maize land races harvested at different growing periods in two zones of central Mexico

The objective of this work was to determine the rumen fermentation characteristics of maize land races used as forage in central Mexico. In vitro gas production (ml per 200 mg dry matter (DM)) incubations were carried out, and cumulative gas volumes were fitted to the Krishnamoorthy et al. (1991) model. The trial used a split-plot design with cultivation practices associated with maize colour (COL) as the main plot with three levels: white, yellow and black maize; growing periods (PER) were the split plots where PER1, PER2 and PER3 represented the first, second and third periods, respectively and two contrasting zones (Z1 = valley and Z2 = mountain) were used as blocking factors. The principal effects observed were associated with the maturity of the plants and potential gas production increased (P < 0.05) in stems (PER 1 = 51.8, PER2 = 56.3, PER3 = 58.4 ml per 200 mg DM) and in whole plant (PER 1 = 60.9, PER2 = 60.8, PER3= 70.9 ml per 200 mg DM). An inverse effect was observed with fermentation rates in leaves (P < 0.01) with 0.061, 0.053 and 0.0509 (per h) and in whole plant (P < 0.05) with 0.068, 0.057, 0.050 (per h) in PER1, PER2 and PER3 respectively. The digestibility of the neutral-detergent fibre (NDF) decreased with maturity especially in leaves (P < 0.05) with values of 0.71, 0.67 and 0.66 g/kg; in rachis (P < 0.01) 0.75, 0.72, and 0.65 in PER1, PER2 and PER3 respectively. The NDF content in leaves in leaves (668, 705 and 713 g/kg DM for PER1, PER2 and PER3, respectively), stems (580, 594 and 644 g/kg DM) and, husk (663, 774 and, 808 g/kg DM) increased (P < 0.05) with increasing plant maturity, rachis were significantly different between periods (P < 0.01). The structure with-the best nutritive characteristics was the husk, because it had the lowest fibre contents, especially in acid-detergent lignin, with values of 22.6, 28.6 and 37.6 g/kg DM in PER1, PER2 and PER3, respectively.

Exploring costs and benefits of HACCP: a pilot study in the dairy and meat products industry in the European Union

Since 1995 the Directive 93/43/EEC prescribes the application of HACCP principles in food production. However, despite the major importance of food safety, there is a fundamental lack of information on the economic impact of this directive. This project aims to study costs and benefits of HACCP, including the impact of HACCP on public health. Due to the complexity of the issue, we propose to start with a pilot study, limited to dairy and meat products industry in NL, UK and I. Information will be obtained at two levels: production chain and public health. Integration of these results will result in recommendations at the levels of EU member states and industry for regulation and supporting measures, and in recommendations for an effective and efficient approach for a more comprehensive project on costs and benefits of HACCP, covering major parts of the food industry in EU member states.

Winners and losers from industry reforms in the developing world: experiences from the electricity and mining sectors

The reform of previously state-owned and operated industries in many Less Developed Countries (LDCs) provide contrary experiences to those in the developed world, which have generally had more equitable distributional impacts. The economic reform policies proposed by the so-called 'Washington Consensus' state that privatisation provides governments with opportunities to raise revenues through the sale of under-performing and indebted state industries, thereby reducing significant fiscal burdens, and, at the same time, facilitating influxes of foreign capital, skills and technology, with the aim of improving operations and a "trickle-down" of benefits. However, experiences in many LDCs over the last 15-20 years suggest that reform has not solved the problem of chronic public-sector debt, and that poverty and socio-economic inequalities have increased during this period of 'neo-liberal' economics. This paper does not seek to challenge the policies themselves, but rather argues that the context in which reform has often taken place is of fundamental significance. The industry-centric policy advice provided by the IFIs typically causes a 'lock-in' of inequitably distributed 'efficiency gains', providing minimal, if any, benefits to impoverished groups. These arguments are made using case study analysis from the electricity and mining sectors.

‘Cursed’ communities? Corporate Social Responsibility (CSR), company towns and the mining industry in Namibia

This article examines Corporate Social Responsibility (CSR) and mining community development, sustainability and viability. These issues are considered focussing on current and former company-owned mining towns in Namibia. Historically company towns have been a feature of mining activity in Namibia. However, the fate of such towns upon mine closure has been and remains controversial. Declining former mining communities and even ghost mining towns can be found across the country. This article draws upon research undertaken in Namibia and considers these issues with reference to three case study communities. This article examines the complexities which surround decision-making about these communities, and the challenges faced in efforts to encourage their sustainability after mining. In this article, mine company engagements through CSR with the development, sustainability and viability of such communities are also critically discussed. The role, responsibilities, and actions of the state in relation to these communities are furthermore reflected upon. Finally, ways forward for these communities are considered.

Roles in construction projects: analysis and terminology

Standard form contracts are typically developed through a negotiated consensus, unless they are proffered by one specific interest group. Previously published plans of work and other descriptions of the processes in construction projects tend to focus on operational issues, or they tend to be prepared from the point of view of one or other of the dominant interest groups. Legal practice in the UK permits those who draft contracts to define their terms as they choose. There are no definitive rulings from the courts that give an indication as to the detailed responsibilities of project participants. The science of terminology offers useful guidance for discovering and describing terms and their meanings in their practical context, but has never been used for defining terms for responsibilities of participants in the construction project management process. Organizational analysis enables the management task to be deconstructed into its elemental parts in order that effective organizational structures can be developed. Organizational mapping offers a useful technique for reducing text-based descriptions of project management roles and responsibilities to a comparable basis. Research was carried out by means of a desk study, detailed analysis of nine plans of work and focus groups representing all aspects of the construction industry. No published plan of work offers definitive guidance. There is an enormous amount of variety in the way that terms are used for identifying responsibilities of project participants. A catalogue of concepts and terms (a “Terminology”) has been compiled and indexed to enable those who draft contracts to choose the most appropriate titles for project participants. The purpose of this terminology is to enable the selection and justification of appropriate terms in order to help define roles. The terminology brings an unprecedented clarity to the description of roles and responsibilities in construction projects and, as such, will be helpful for anyone seeking to assemble a team and specify roles for project participants.

Categories of GM risk-benefit perceptions and their antecedents

The stated benefits and perceived risks of genetic modification (GM) cover very diverse issues, such as food safety, world food security, and the environment, that may differentially affect consumer acceptance. In this research, we hypothesize that consumers perceive up to eight dimensions: risks to business (farmers, agribusiness, etc.), benefits to business, risks and benefits to the environment, risks and benefits to the developing world, and risks and benefits to self and family. Moral concerns are also recognized. Using data collected in 2002 in the United States, France, and the UK, we investigate these different dimensions. Second, we analyze the extent to which the dimensions of risk-benefit perceptions can be explained by general attitudes widely used to explain food purchase behavior (such as general attitude to the environment, to technology, etc.), as well as by perceived knowledge of GM, level of education, and trust in various sources of information. In all locations, the majority of consumers only perceive a medium level of risk from GM products. Attitude to technology is the most important attitude variable—those with a positive attitude to technology in general also have a positive attitude to GM technology. More Americans than Europeans fall into this category. Those who trust government and the food industry tend to think GM technology is less risky, whereas those who trust activists believe the opposite. Americans are more trusting of the former, Europeans of the latter. Level of education is positively associated with benefit perceptions and negatively associated with moral concerns. Location continues to play a limited independent role in explaining perceptions even after these factors have been taken into account.

Learning across business sectors: context, embeddedness and conceptual chasms

While the construction industry is frequently encouraged to learn from other business sectors, the difficulties of transferring knowledge from one context to another are rarely acknowledged. The problematic nature of knowledge is addressed with particular emphasis on the concept of contextual embeddedness. From this point of view, the process of 'knowledge transfer' depends upon a prolonged process of socialization between actors from both the 'receiving' and 'sending' contexts networking. It is contended that a significant conceptual chasm exists between the exhortations of industry leaders to learn from other sectors and the theoretical complexities associated with knowledge transfer. An ongoing research project is described that seeks to facilitate knowledge sharing between construction and aerospace. A novel approach to knowledge sharing based upon soft systems methodology (SSM) (Mode 2) is described and justified. Initial findings from the first cycle of the research are discussed and used to highlight the importance of context in the implementation of supply chain management.

Towards a framework for managing IT-enabled change, sourcing and governance

In the resource-based view, organisations are represented by the sum of their physical, human and organisational assets, resources and capabilities. Operational capabilities maintain the status quo and allow an organisation to execute their existing business. Dynamic capabilities, otherwise, allow an organisation to change this status quo including a change of the operational ones. Competitive advantage, in this context, is an effect of continuously developing and reconfiguring these firm-specific assets through dynamic capabilities. Deciding where and how to source the core operational capabilities is a key success factor. Furthermore, developing its dynamic capabilities allows an organisation to effectively manage change its operational capabilities. Many organisations are asserted to have a high dependency on - as well as a high benefit from - the use of information technology (IT), making it a crucial and overarching resource. Furthermore, the IT function is assigned the role as a change enabler and so IT sourcing affects the capability of managing business change. IT sourcing means that organisations need to decide how to source their IT capabilities. Outsourcing of parts of the IT function will also outsource some of the IT capabilities and therefore some of the business capabilities. As a result, IT sourcing has an impact on the organisation's capabilities and consequently on the business success. And finally, a turbulent and fast moving business environment challenges organisations to effectively and efficiently managing business change. Our research builds on the existing theory of dynamic and operational capabilities by considering the interdependencies between the dynamic capabilities of business change and IT sourcing. Further it examines the decision-making oversight of these areas as implemented through IT governance. We introduce a new conceptual framework derived from the existing theory and extended through an illustrative case study conducted in a German bank. Under a philosophical paradigm of constructivism, we collected data from eight semi-structured interviews and used additional sources of evidence in form of annual accounts, strategy papers and IT benchmark reports. We applied an Interpretative Phenomenological Analysis (IPA), which emerged the superordinate themes for our tentative capabilities framework. An understanding of these interdependencies enables scholars and professionals to improve business success through effectively managing business change and evaluating the impact of IT sourcing decisions on the organisation's operational and dynamic capabilities.

The potential of flood forecasting using a variable-resolution global Digital Terrain Model and flood extents from Synthetic Aperture Radar images

A basic data requirement of a river flood inundation model is a Digital Terrain Model (DTM) of the reach being studied. The scale at which modeling is required determines the accuracy required of the DTM. For modeling floods in urban areas, a high resolution DTM such as that produced by airborne LiDAR (Light Detection And Ranging) is most useful, and large parts of many developed countries have now been mapped using LiDAR. In remoter areas, it is possible to model flooding on a larger scale using a lower resolution DTM, and in the near future the DTM of choice is likely to be that derived from the TanDEM-X Digital Elevation Model (DEM). A variable-resolution global DTM obtained by combining existing high and low resolution data sets would be useful for modeling flood water dynamics globally, at high resolution wherever possible and at lower resolution over larger rivers in remote areas. A further important data resource used in flood modeling is the flood extent, commonly derived from Synthetic Aperture Radar (SAR) images. Flood extents become more useful if they are intersected with the DTM, when water level observations (WLOs) at the flood boundary can be estimated at various points along the river reach. To illustrate the utility of such a global DTM, two examples of recent research involving WLOs at opposite ends of the spatial scale are discussed. The first requires high resolution spatial data, and involves the assimilation of WLOs from a real sequence of high resolution SAR images into a flood model to update the model state with observations over time, and to estimate river discharge and model parameters, including river bathymetry and friction. The results indicate the feasibility of such an Earth Observation-based flood forecasting system. The second example is at a larger scale, and uses SAR-derived WLOs to improve the lower-resolution TanDEM-X DEM in the area covered by the flood extents. The resulting reduction in random height error is significant.