Regulation of L-alanine dehydrogenase in Rhizobium leguminosarum bv. viciae and its role in pea nodules

Alanine dehydrogenase (AldA) is the principal enzyme with which pea bacteroids synthesize alanine de novo. In free-living culture, AMA activity is induced by carboxylic acids (succinate, malate, and pyruvate), although the best inducer is alanine. Measurement of the intracellular concentration of alanine showed that AldA contributes to net alanine synthesis in laboratory cultures. Divergently transcribed from aldA is an AsnC type regulator, aldR. Mutation of aldR prevents induction of AldA activity. Plasmid-borne gusA fusions showed that aldR is required for transcription of both aldA and aldR; hence, AldR is autoregulatory. However, plasmid fusions containing the aldA-aldR intergenic region could apparently titrate out AldR, sometimes resulting in a complete loss of AldA enzyme activity. Therefore, integrated aldR::gusA and aldA::gusA fusions, as well as Northern blotting, were used to confirm the induction of aldA activity. Both aldA and aldR were expressed in the II/III interzone and zone III of pea nodules. Overexpression of aldA in bacteroids did not alter the ability of pea plants to fix nitrogen, as measured by acetylene reduction, but caused a large reduction in the size and dry weight of plants. This suggests that overexpression of aldA impairs the ability of bacteroids to donate fixed nitrogen that the plant can productively assimilate. We propose that the role of AldA may be to balance the alanine level for optimal functioning of bacteroid metabolism rather than to synthesize alanine as the sole product of N-2 reduction.

Valorisation of side streams from wheat milling and confectionery industries for consolidated production and extraction of microbial lipids

Crude enzymes produced via solid state fermentation (SSF) using wheat milling by-products have been employed for both fermentation media production using flour-rich waste (FRW) streams and lysis of Rhodosporidium toruloides yeast cells. Filter sterilization of crude hydrolysates was more beneficial than heat sterilization regarding yeast growth and microbial oil production. The initial carbon to free amino nitrogen ratio of crude hydrolysates was optimized (80.2 g/g) in fed-batch cultures of R. toruloides leading to a total dry weight of 61.2 g/L with microbial oil content of 61.8 % (w/w). Employing a feeding strategy where the glucose concentration was maintained in the range of 12.2 – 17.6 g/L led to the highest productivity (0.32 g/L∙h). The crude enzymes produced by SSF were utilised for yeast cell treatment leading to simultaneous release of around 80% of total lipids in the broth and production of a hydrolysate suitable as yeast extract replacement.

Formulation of fermentation media from flour-rich waste streams for microbial lipid production by Lipomyces starkeyi

Flour-rich waste (FRW) and by-product streams generated by bakery, confectionery and wheat milling plants could be employed as the sole raw materials for generic fermentation media production, suitable for microbial oil synthesis. Wheat milling by-products were used in solid state fermentations (SSF) of Aspergillus awamori for the production of crude enzymes, mainly glucoamylase and protease. Enzyme-rich SSF solids were subsequently employed for hydrolysis of FRW streams into nutrient-rich fermentation media. Batch hydrolytic experiments using FRW concentrations up to 205 g/L resulted in higher than 90%(w/w) starch to glucose conversion yields and 40% (w/w) total Kjeldahl nitrogen to free amino nitro-gen conversion yields. Starch to glucose conversion yields of 98.2, 86.1 and 73.4% (w/w) were achieved when initial FRW concentrations of 235, 300 and 350 g/L were employed in fed-batch hydrolytic experiments, respectively. Crude hydrolysates were used as fermentation media in shake flask cultures with the oleaginous yeast Lipomyces starkeyi DSM 70296 reaching a total dry weight of 30.5 g/L with a microbial oil content of 40.4% (w/w), higher than that achieved in synthetic media. Fed-batch bioreactor cultures led to a total dry weight of 109.8 g/L with a microbial oil content of 57.8% (w/w) and productivity of 0.4 g/L/h.

Modelling cereal root systems for water and nitrogen capture: Towards an economic optimum

A quantitative model of wheat root systems is developed that links the size and distribution of the root system to the capture of water and nitrogen (which are assumed to be evenly distributed with depth) during grain filling, and allows estimates of the economic consequences of this capture to be assessed. A particular feature of the model is its use of summarizing concepts, and reliance on only the minimum number of parameters (each with a clear biological meaning). The model is then used to provide an economic sensitivity analysis of possible target characteristics for manipulating root systems. These characteristics were: root distribution with depth, proportional dry matter partitioning to roots, resource capture coefficients, shoot dry weight at anthesis, specific root weight and water use efficiency. From the current estimates of parameters it is concluded that a larger investment by the crop in fine roots at depth in the soil, and less proliferation of roots in surface layers, would improve yields by accessing extra resources. The economic return on investment in roots for water capture was twice that of the same amount invested for nitrogen capture. (C) 2003 Annals of Botany Company.

Availability of heavy metals for uptake by Salix viminalis on a moderately contaminated dredged sediment disposal site

Extractability of Cd. Cr, Cu, Ni, Pb, and Zn in a dredged sediment disposal site was assessed using single extraction Procedures (H2O; 0.01 M CaCl2; 1 M NH4OAc NH4OAc-EDTA. CaCl2-TEA-DTPA). Only Cd and Zn were Found to exceed statutory threshold values for total content. The field was planted with Salix viminalis "Orm" and accumulation of heavy metals in bark, leaves, roots, and wood was evaluated at seven sampling locations along an observed gradient in texture and pollution. Biomass production was high, ranging from 13.2 to 17.8 t ha(1) y(1) dry weight. Metal accumulation in aboveground Plant parts Was low. amounting to the following annually extracted mass or metals per ha: 5034 g Zn, 83 g Cd. W g Cu. 83 g Pb, 12 g Ni and 6 g Cr. The use of accumulating clones and the use of soil amendments might enhance extraction efficiency in future research. (C) 2005 Elsevier Ltd. All rights reserved.

Effect of ammonium and nitrate on indigenous mycorrhizal infection, rhizosphere pH change, and phosphorus uptake by sorghum

Sorghum (Sorghum bicolor L.) plants were grown in split pots in three Rothamsted soils with different soil pH values and phosphorus (P) contents. Ammonium addition resulted in higher plant dry weight and P content than comparable nitrate treatments. The pH of soils in the rhizosphere (0.51-mm average thickness) differed from the bulk soil depending on nitrogen (N) form and level. Ammonium application resulted in a pH decrease, but nitrate application slightly increased pH. To examine the effect of rhizosphere acidification on mobilization of phosphate, 0.5 M NaHCO3 extractable phosphate was measured. The lowering rhizosphere pH enhanced the solubility of P in the soil and maybe availability of P to plants. Rhizosphere-P depletion increased with increasing ammonium supply, but when N was supplied as nitrate, P depletion was not related to increasing nitrate supply. Low P status Hoosfield soils developed mycorrhizal infection., and as a result, P inflow was increased. Geescroft soil, which initially had a high P status, did not develop mycorrhizal infection, and P inflow was much smaller and was unaffected by N treatments. Therefore, plant growth and P uptake were influenced by both rhizosphere pH and indigenous mycorrhizal infection.

Developmental changes in the germinability, desiccation tolerance, hardseededness, and longevity of individual seeds of Trifolium ambiguum

Background and Aims: Using two parental clones of outcrossing Trifolium ambiguum as a potential model system, we examined how during seed development the maternal parent, number of seeds per pod, seed position within the pod, and pod position within the inflorescence influenced individual seed fresh weight, dry weight, water content, germinability, desiccation tolerance, hardseededness, and subsequent longevity of individual seeds. Methods: Near simultaneous, manual reciprocal crosses were carried out between clonal lines for two experiments. Infructescences were harvested at intervals during seed development. Each individual seed was weighed and then used to determine dry weight or one of the physiological behaviour traits. Key Results: Whilst population mass maturity was reached at 33–36 days after pollination (DAP), seed-to-seed variation in maximum seed dry weight, when it was achieved, and when maturation drying commenced, was considerable. Individual seeds acquired germinability between 14 and 44 DAP, desiccation tolerance between 30 and 40 DAP, and the capability to become hardseeded between 30 and 47 DAP. The time for viability to fall to 50 % (p50) at 60 % relative humidity and 45 °C increased between 36 and 56 DAP, when the seed coats of most individuals had become dark orange, but declined thereafter. Individual seed f. wt at harvest did not correlate with air-dry storage survival period. Analysing survival data for cohorts of seeds reduced the standard deviation of the normal distribution of seed deaths in time, but no sub-population showed complete uniformity of survival period. Conclusions: Variation in individual seed behaviours within a developing population is inherent and inevitable. In this outbreeder, there is significant variation in seed longevity which appears dependent on embryo genotype with little effect of maternal genotype or architectural factors.

Formation of dityrosine cross-links during breadmaking

To establish its significance during commercial breadmaking, dityrosine formation was quantified in flours and doughs of six commercial wheat types at various stages of the Chorleywood Bread Process. Dityrosine was formed mainly during mixing and baking, at the levels of nmol/g dry weight. Good breadmaking flours tended to exhibit higher dityrosine content in the final bread than low quality ones, but no relationship was found for dityrosine as a proportion of flour protein content, indicating that the latter was still a dominant factor in the analysis. There was no correlation between gluten yield of the six wheat types and their typical dityrosine concentrations, suggesting that dityrosine crosslinks were not a determinant factor for gluten formation. Ascorbic acid was found to inhibit dityrosine formation during mixing and proving, and have no significant effect on dityrosine in the final bread. Hydrogen peroxide promoted dityrosine formation, which suggests a radical mechanism involving endogenous peroxidases might be the responsible for dityrosine formation during breadmaking.

Effects of biosolids from tomato processing on soil fertility and wheat growth in a Greek alfisol

The effects of biosolids from tomato processing on soil properties and wheat growth were investigated in an Alfisol from central Greece. Biosolids were mixed with soil from the surface (Ap) or subsurface (Bt) horizon in plastic containers at rates of 1%, 5%, and 10% by dry weight (d.w.; equivalent to 10, 50, and 100 Mg ha–1). Biosolid treatments were compared to an NH4Cl application (50 mg N kg–1) and an untreated control in (1) a 102 d incubation experiment at 28°C to determine biosolid nitrification potential and (2) a 45 d outdoor experiment to evaluate effects on soil fertility and wheat growth. Mineralization of biosolids in the incubation experiment resulted in accumulation of nitrate-N and indicated that biosolids were able to supply N that was in excess of crop needs in treatments of 5% and 10%. After 45 d of wheat growth, available soil nutrients (N, P) and P uptake by wheat were distinctly lower in the Bt than in the Ap horizon. However, soil pH, electrical conductivity, organic matter, total N, nitrate-N, extractable P, and exchangeable K increased with increasing rate of biosolid application in both soils. These were followed by corresponding increases in wheat nutrient uptake and biomass production, thus demonstrating the importance of this organic material for sustaining production in soils of low immediate fertility. Compared to the NH4Cl treatment (50 kg N ha–1 equivalent), biosolid application rates of 5% and 10% had higher available soil nutrients, similar or higher nutrient uptake and higher wheat biomass. But only an application of 10% biosolids provided sufficient N levels for wheat in the surface soil, and even higher applications were required for providing sufficient N and P in the Bt horizon.

Formulation and delivery of the bacterial antagonist Bacillus subtilis for management of lentil vascular wilt caused by Fusarium oxysporum f. sp lentis

Different formulations of Bacillus subtilis were prepared using standard laboratory protocols. Bacillus subtilis survived in glucose and talc powders at 8.6 and 7.8 log(10) CFU/g, respectively, for 1 year of storage at room temperature compared with 3.5 log(10) CFU/g on a peat formulation. Glasshouse experiments using soil and seed treatments were conducted to test the efficacy of B. subtilis for protecting lentil against the wilt disease caused by Fusariumoxysporum f. sp. lentis. Seed treatments with formulations of B. subtilis on glucose, talc and peat significantly enhanced its biocontrol activity against Fusarium compared with a treatment in which spores were applied directly to seed. The formulations decreased disease severity by reducing colonization of plants by the pathogen, promoting their growth and increased the dry weight of lentil plants. Of these treatments the glucose and talc-based powder formulations were more effective than the peat formulation and the spore application without a carrier. It was shown that the B. subtilis spores applied with glucose were viable for longer than those applied with other carriers. Seed treatment with these formulated spores is an effective delivery system that can provide a conducive environment for B. subtilis to suppress vascular wilt disease on lentil and has the potential for utilization in commercial field application.

Difference in competence for in vitro proliferation and ex vitro growth of genetically identical mature and juvenile clones of apomictic Malus species

The apomictic system in Malus wits Used Is a model to examine rejuvenation by generating genetically identical tissue culture lines that had two entirely different developmental origins: either embryo-derived tissues (juvenile clones) or somatic tissue from the adult/mature tree (mature clones). These two lines were then subsequently used to examine in vitro difference between mature (M) and juvenile (J) tissues in potential for shoot, root proliferation and ex vitro (glasshouse) growth. The M clones of M. hupehensis and M. toringoides in vitro had significantly fewer total shoots and shoot more than 2 cm in length per proliferating explant than the J clones and also rooted less efficiently. Ex vitro (glasshouse) juvenile clones had shorter internodes, a greater number of leaves and more dry weight compared to their mature counterparts.

Genotypic differences in the growth of bananas (Musa spp.) infected with migratory endoparasitic nematodes. 1. Roots

The effects of nematodes on root morphology and the association of root characteristics with resistance to nematodes of seven banana varieties were investigated in two experiments. Banana plants were grown in controlled conditions within polytunnels and harvested on three occasions for the measurement of root morpholopy, and biomass. Varieties differed in their resistance to nematodes, from resistant (Yg Km5, FHIA 17, FHIA 03) and partly resistant (FHIA 01, FHIA 25) to not resistant ((FHIA 23, Williams). Nematodes reduced the root dry weight of FHIA 01, FHIA 17 and FHIA 23 at some harvests. Primary root number was on average 9.5% lower in nematode-infected plants than controls, with no differences among the varieties. Thus, there was no simple association between the resistance of these varieties and their tolerance to nematodes. Varieties differed in root morphology. Root dry weight was greatest for resistant varieties Yg Km5 and FHIA 03, and least for non-resistant varieties FHIA 23 and Williams. Thus, resistance to nematodes was associated with varieties with greater root mass and more and larger primary roots.

Genotypic differences in the growth of bananas (Musa spp.) infected with migratory endoparasitic nematodes. 2. Shoots

In order to identify the effect of burrowing nematodes on the shoots (pseudostem and leaves) of banana plants and to determine whether or not shoot characteristics are associated with plant resistance to nematodes two experiments were conducted in controlled conditions within polytunnels. The banana plants were harvested on three occasions for the measurement of root morphology and biomass. Varieties differed in their resistance to nematodes from resistant (Yg Km5, FHIA 17, FHIA 03) and partly resistant (FHIA 01, FHIA 25) to not resistant (FHIA 23, Williams). Nematodes reduced total plant dry weight at the first harvest in Experiment 1 and by an average of 8.8% in Experiment 2, but did not affect leaf area in either experiment. The ratio of above-ground Weight to total plant weight was reduced from 75% to 72% in nematode-infected plants compared with the control plants for all varieties tested in Experiment 1, but was only reduced in FHIA 25 and FHIA 23 in Experiment 2. Varieties differed in above-ground growth. The FHIA varieties had greater shoot weights and leaf area than YgKm5 and Williams. Overall, resistance to nematodes was associated with the partitioning of a greater proportion of biomass to the roots than to above-ground parts.

Onset of germinability, desiccation tolerance and hardseededness in developing seeds of Peltophorum pterocarpum (DC) K. Heyne (Caesalpinioideae)

In the hot and dry conditions in which seeds of the tree legume Peltophorum pterocarpum develop and mature in Vietnam, seed moisture content declined rapidly on the mother plant from 87% at 42 d after flowering (DAF) to 15% at 70 DAF. Dry weight of the pods attained a maximum value at about 42 DAF, but seed mass maturity (i.e. the end of the seed-filling phase) occurred at about 62 DAF, at which time seed moisture content was about 45-48%. The onset of the ability of freshly collected seeds to germinate (in 63-d tests at 28-34degreesC) occurred at 42 DAF, i.e. about 20 d before mass maturity. Full germination (98%) was attained at 70 DAF, i.e. at about 8 d after mass maturity. Thereafter, germination of fresh seeds declined, due to the imposition of a hard seed coat. Tolerance of desiccation to 10% moisture content was first detected at 56 DAF and was complete within the seed population by 84 DAF, i.e. about 22 d after mass maturity. Hardseededness began to be induced when seeds were dried to about 15% moisture content and below, with a negative logarithmic relation between hardseededness and moisture content below this value.