Gaining acceptability for the Bayesian decision-theoretic approach in dose-escalation studies

There has recently been increasing demand for better designs to conduct first-into-man dose-escalation studies more efficiently, more accurately and more quickly. The authors look into the Bayesian decision-theoretic approach and use simulation as a tool to investigate the impact of compromises with conventional practice that might make the procedures more acceptable for implementation. Copyright © 2005 John Wiley & Sons, Ltd.

The double triangular test in practice

The double triangular test was introduced twenty years ago, and the purpose of this paper is to review applications that have been made since then. In fact, take-up of the method was rather slow until the late 1990s, but in recent years several clinical trial reports have been published describing its use in a wide range of therapeutic areas. The core of this paper is a detailed account of five trials that have been published since 2000 in which the method was applied to studies of pancreatic cancer, breast cancer, myocardial infarction, epilepsy and bedsores. Before those accounts are given, the method is described and the history behind its evolution is presented. The future potential of the method for sequential case-control and equivalence trials is also discussed. Copyright © 2004 John Wiley & Sons, Ltd.

Decision-making in a phase II clinical trial: a new approach combining Bayesian and frequentist concepts

The aim of a phase H clinical trial is to decide whether or not to develop an experimental therapy further through phase III clinical evaluation. In this paper, we present a Bayesian approach to the phase H trial, although we assume that subsequent phase III clinical trials will hat,e standard frequentist analyses. The decision whether to conduct the phase III trial is based on the posterior predictive probability of a significant result being obtained. This fusion of Bayesian and frequentist techniques accepts the current paradigm for expressing objective evidence of therapeutic value, while optimizing the form of the phase II investigation that leads to it. By using prior information, we can assess whether a phase II study is needed at all, and how much or what sort of evidence is required. The proposed approach is illustrated by the design of a phase II clinical trial of a multi-drug resistance modulator used in combination with standard chemotherapy in the treatment of metastatic breast cancer. Copyright (c) 2005 John Wiley & Sons, Ltd.

Comparison of sample size formulae for 2x2 cross-over designs applied to bioequivalence studies

We consider the comparison of two formulations in terms of average bioequivalence using the 2 × 2 cross-over design. In a bioequivalence study, the primary outcome is a pharmacokinetic measure, such as the area under the plasma concentration by time curve, which is usually assumed to have a lognormal distribution. The criterion typically used for claiming bioequivalence is that the 90% confidence interval for the ratio of the means should lie within the interval (0.80, 1.25), or equivalently the 90% confidence interval for the differences in the means on the natural log scale should be within the interval (-0.2231, 0.2231). We compare the gold standard method for calculation of the sample size based on the non-central t distribution with those based on the central t and normal distributions. In practice, the differences between the various approaches are likely to be small. Further approximations to the power function are sometimes used to simplify the calculations. These approximations should be used with caution, because the sample size required for a desirable level of power might be under- or overestimated compared to the gold standard method. However, in some situations the approximate methods produce very similar sample sizes to the gold standard method. Copyright © 2005 John Wiley & Sons, Ltd.

Evaluation of a sequential global test of improved recovery following stroke as applied to the ICTUS trial of citicoline

The International Citicoline Trial in acUte Stroke is a sequential phase III study of the use of the drug citicoline in the treatment of acute ischaemic stroke, which was initiated in 2006 in 56 treatment centres. The primary objective of the trial is to demonstrate improved recovery of patients randomized to citicoline relative to those randomized to placebo after 12 weeks of follow-up. The primary analysis will take the form of a global test combining the dichotomized results of assessments on three well-established scales: the Barthel Index, the modified Rankin scale and the National Institutes of Health Stroke Scale. This approach was previously used in the analysis of the influential National Institute of Neurological Disorders and Stroke trial of recombinant tissue plasminogen activator in stroke. The purpose of this paper is to describe how this trial was designed, and in particular how the simultaneous objectives of taking into account three assessment scales, performing a series of interim analyses and conducting treatment allocation and adjusting the analyses to account for prognostic factors, including more than 50 treatment centres, were addressed. Copyright (C) 2008 John Wiley & Sons, Ltd.

Action following the discovery of a global association between the whole genome and adverse event risk in a clinical drug-development programme

Observation of adverse drug reactions during drug development can cause closure of the whole programme. However, if association between the genotype and the risk of an adverse event is discovered, then it might suffice to exclude patients of certain genotypes from future recruitment. Various sequential and non-sequential procedures are available to identify an association between the whole genome, or at least a portion of it, and the incidence of adverse events. In this paper we start with a suspected association between the genotype and the risk of an adverse event and suppose that the genetic subgroups with elevated risk can be identified. Our focus is determination of whether the patients identified as being at risk should be excluded from further studies of the drug. We propose using a utility function to? determine the appropriate action, taking into account the relative costs of suffering an adverse reaction and of failing to alleviate the patient's disease. Two illustrative examples are presented, one comparing patients who suffer from an adverse event with contemporary patients who do not, and the other making use of a reference control group. We also illustrate two classification methods, LASSO and CART, for identifying patients at risk, but we stress that any appropriate classification method could be used in conjunction with the proposed utility function. Our emphasis is on determining the action to take rather than on providing definitive evidence of an association. Copyright (C) 2008 John Wiley & Sons, Ltd.

A simple two-stage design for quantitative responses with application to a study in diabetic neuropathic pain

Two-stage designs offer substantial advantages for early phase II studies. The interim analysis following the first stage allows the study to he stopped for futility, or more positively, it might lead to early progression to the trials needed for late phase H and phase III. If the study is to continue to its second stage, then there is an opportunity for a revision of the total sample size. Two-stage designs have been implemented widely in oncology studies in which there is a single treatment arm and patient responses are binary. In this paper the case of two-arm comparative studies in which responses are quantitative is considered. This setting is common in therapeutic areas other than oncology. It will be assumed that observations are normally distributed, but that there is some doubt concerning their standard deviation, motivating the need for sample size review. The work reported has been motivated by a study in diabetic neuropathic pain, and the development of the design for that trial is described in detail. Copyright (C) 2008 John Wiley & Sons, Ltd.

Fitting models for the joint action of two drugs using SAS(R)

Combinations of drugs are increasingly being used for a wide variety of diseases and conditions. A pre-clinical study may allow the investigation of the response at a large number of dose combinations. In determining the response to a drug combination, interest may lie in seeking evidence of synergism, in which the joint action is greater than the actions of the individual drugs, or of antagonism, in which it is less. Two well-known response surface models representing no interaction are Loewe additivity and Bliss independence, and Loewe or Bliss synergism or antagonism is defined relative to these. We illustrate an approach to fitting these models for the case in which the marginal single drug dose-response relationships are represented by four-parameter logistic curves with common upper and lower limits, and where the response variable is normally distributed with a common variance about the dose-response curve. When the dose-response curves are not parallel, the relative potency of the two drugs varies according to the magnitude of the desired effect and the models for Loewe additivity and synergism/antagonism cannot be explicitly expressed. We present an iterative approach to fitting these models without the assumption of parallel dose-response curves. A goodness-of-fit test based on residuals is also described. Implementation using the SAS NLIN procedure is illustrated using data from a pre-clinical study. Copyright © 2007 John Wiley & Sons, Ltd.

Bayesian decision procedures for binary and continuous bivariate dose-escalation studies

In this paper, Bayesian decision procedures are developed for dose-escalation studies based on binary measures of undesirable events and continuous measures of therapeutic benefit. The methods generalize earlier approaches where undesirable events and therapeutic benefit are both binary. A logistic regression model is used to model the binary responses, while a linear regression model is used to model the continuous responses. Prior distributions for the unknown model parameters are suggested. A gain function is discussed and an optional safety constraint is included. Copyright (C) 2006 John Wiley & Sons, Ltd.

Proposed best practice for statisticians in the reporting and publication of pharmaceutical industry-sponsored clinical trials

In this paper we set out what we consider to be a set of best practices for statisticians in the reporting of pharmaceutical industry-sponsored clinical trials. We make eight recommendations covering: author responsibilities and recognition; publication timing; conflicts of interest; freedom to act; full author access to data; trial registration and independent review. These recommendations are made in the context of the prominent role played by statisticians in the design, conduct, analysis and reporting of pharmaceutical sponsored trials and the perception of the reporting of these trials in the wider community.

The potential for bias in reporting of industry-sponsored clinical trials

Concerns about potentially misleading reporting of pharmaceutical industry research have surfaced many times. The potential for duality (and thereby conflict) of interest is only too clear when you consider the sums of money required for the discovery, development and commercialization of new medicines. As the ability of major, mid-size and small pharmaceutical companies to innovate has waned, as evidenced by the seemingly relentless decline in the numbers of new medicines approved by Food and Drug Administration and European Medicines Agency year-on-year, not only has the cost per new approved medicine risen: so too has the public and media concern about the extent to which the pharmaceutical industry is open and honest about the efficacy, safety and quality of the drugs we manufacture and sell. In 2005 an Editorial in Journal of the American Medical Association made clear that, so great was their concern about misleading reporting of industry-sponsored studies, henceforth no article would be published that was not also guaranteed by independent statistical analysis. We examine the precursors to this Editorial, as well as its immediate and lasting effects for statisticians, for the manner in which statistical analysis is carried out, and for the industry more generally.

Modeling data with structural and temporal correlation using lower level and higher level multilevel models

Novel imaging techniques are playing an increasingly important role in drug development, providing insight into the mechanism of action of new chemical entities. The data sets obtained by these methods can be large with complex inter-relationships, but the most appropriate statistical analysis for handling this data is often uncertain - precisely because of the exploratory nature of the way the data are collected. We present an example from a clinical trial using magnetic resonance imaging to assess changes in atherosclerotic plaques following treatment with a tool compound with established clinical benefit. We compared two specific approaches to handle the correlations due to physical location and repeated measurements: two-level and four-level multilevel models. The two methods identified similar structural variables, but higher level multilevel models had the advantage of explaining a greater proportion of variation, and the modeling assumptions appeared to be better satisfied.

Hcp2, a secreted protein of the phytopathogen Pseudomonas syringae pv. tomato DC3000, is required for competitive fitness against bacteria and yeasts

When analysing the secretome of the plant pathogen Pseudomonas syringae pv. tomato (Pst) DC3000, we identified hemolysin co-regulated protein (Hcp) as one of the secreted proteins. Hcp is assumed to be an extracellular component of the type VI secretion system (T6SS). Two copies of hcp genes are present in the Pst DC3000 genome, hcp1 (PSPTO_2539) and hcp2 (PSPTO_5435). We studied the expression patterns of hcp genes and tested the fitness of hcp knock-out mutants in host plant colonization and in inter-microbial competition. We found that the hcp2 gene is expressed, most actively at the stationary growth phase, and that the Hcp2 protein is secreted via T6SS and appears in the culture medium as covalently linked dimers. Expression of hcp2 is not induced in planta and it does not contribute to virulence or colonisation in tomato or Arabidopsis plants. Instead, hcp2 is required for survival in competition with enterobacteria and yeasts, and its function is associated with suppression of the growth of these competitors. This is the first report on bacterial T6SS-associated genes functioning in competition against yeast. Our results suggest that the T6SS of P. syringae may play an important role in bacterial fitness, allowing this plant pathogen to survive in conditions where it has to compete with other micro-organisms for resources.

A practical comparison of blinded methods for sample size reviews in survival data clinical trials.

This paper presents practical approaches to the problem of sample size re-estimation in the case of clinical trials with survival data when proportional hazards can be assumed. When data are readily available at the time of the review, on a full range of survival experiences across the recruited patients, it is shown that, as expected, performing a blinded re-estimation procedure is straightforward and can help to maintain the trial's pre-specified error rates. Two alternative methods for dealing with the situation where limited survival experiences are available at the time of the sample size review are then presented and compared. In this instance, extrapolation is required in order to undertake the sample size re-estimation. Worked examples, together with results from a simulation study are described. It is concluded that, as in the standard case, use of either extrapolation approach successfully protects the trial error rates. Copyright © 2012 John Wiley & Sons, Ltd.