Accrual-based and real earnings management before and after IFRS adoption: the case of Greece

Purpose – The purpose of this study is to examine the use of accrual-based vs real earnings management (EM) by Greek firms, before and after the mandatory adoption of International Financial Reporting Standards (IFRS). The research is motivated by the fact that past studies have indicated the existence of significant levels of EM for Greece in particular before IFRS. Design/methodology/approach – Accrual-based earnings management (AEM) is examined by assessing performance-adjusted discretionary accruals, while real earnings management (REM) is defined in terms of abnormal levels of production costs, discretionary expenses, and cash flows from operations, for a three-year period before and after the adoption of IFRS in 2005. Findings – The authors find evidence on a statistically significant shift from AEM to REM after the adoption of IFRS, indicating the replacement of one form of EM with the other. Research limitations/implications – The validity of the results depends on the ability of the empirical models used to efficiently capture the existence of AEM and REM. Practical implications – IFRS adoption aims to improve accounting quality, especially in countries with high need for such an improvement; however, the tendency to substitute one form of EM with another highlights unintended consequences of IFRS adoption, which do not improve the informational content of financial statements if EM continues under different forms. Originality/value – Under the expectation that IFRS adoption should lead to improvements in accounting quality, this study examines whether IFRS actually led to a reduction of EM practices for a country with exceptionally high levels of EM before IFRS, by accounting for all possible forms of EM.

Reductions in insecticide use from adoption of Bt cotton in South Africa: impacts on economic performance and toxic load to the environment

The study reported presents the findings relating to commercial growing of genetically-modified Bt cotton in South Africa by a large sample of smallholder farmers over three seasons (1998/99, 1999/2000, 2000/01) following adoption. The analysis presents constructs and compares groupwise differences for key variables in Bt v. non-Bt technology and uses regressions to further analyse the production and profit impacts of Bt adoption. Analysis of the distribution of benefits between farmers due to the technology is also presented. In parallel with these socio-economic measures, the toxic loads being presented to the environment following the introduction of Bt cotton are monitored in terms of insecticide active ingredient (ai) and the Biocide Index. The latter adjusts ai to allow for differing persistence and toxicity of insecticides. Results show substantial and significant financial benefits to smallholder cotton growers of adopting Bt cotton over three seasons in terms of increased yields, lower insecticide spray costs and higher gross margins. This includes one particularly wet, poor growing season. In addition, those with the smaller holdings appeared to benefit proportionately more from the technology (in terms of higher gross margins) than those with larger holdings. Analysis using the Gini-coefficient suggests that the Bt technology has helped to reduce inequality amongst smallholder cotton growers in Makhathini compared to what may have been the position if they had grown conventional cotton. However, while Bt growers applied lower amounts of insecticide and had lower Biocide Indices (per ha) than growers of non-Bt cotton, some of this advantage was due to a reduction in non-bollworm insecticide. Indeed, the Biocide Index for all farmers in the population actually increased with the introduction of Bt cotton. The results indicate the complexity of such studies on the socio-economic and environmental impacts of GM varieties in the developing world.

Factors affecting the adoption of leguminous cover crops in Nigeria and a comparison with the adoption of new crop varieties

This paper presents the results of (a) On-farm trials (eight) over a two-year period designed to test the effectiveness of leguminous cover crops in terms of increasing maize yields in Igalaland, Nigeria. (b) A survey designed to monitor the extent of, and reasons behind, adoption of the leguminous cover crop technology in subsequent years by farmers involved, to varying degrees, in the trial programme. particular emphasis was placed on comparing adoption of leguminous cover crops with that of new crop varieties released by a non-governmental organization in the same area since the mid 1980s. While the leguminous cover crop technology boosted maize grain yields by 127 to 136% above an untreated control yield of between 141 and 171 kg ha(-1), the adoption rate (number of farmers adopting) was only 18%. By way of contrast, new crop varieties had a highly variable benefit in terms of yield advantage over local varieties, with the best average increase of around 20%. Adoption rates for new crop varieties, assessed as both the number of farmers growing the varieties and the number of plots planted to the varieties, were 40% on average. The paper discusses some key factors influencing adoption of the leguminous cover crop technology, including seed availability. Implications of these results for a local non-governmental organization, the Diocesan Development Services, concerned with promoting the leguminous cover crop technology are also discussed.

Promoting sustainability: Efficacy and adoption of tobacco-based insecticides in Nigeria

The promotion of technologies seen to be aiding in the attainment of agricultural sustainability has been Popular amongst Northern-based development donors for many years. One of these, botanical insecticides (e.g., those based on neem, Pyrethrum and tobacco) have been a particular favorite as they are equated with being 'natural' and hence less damaging to human health and the environment. This paper describes the outcome of interactions between one non-government organisation (NGO), the Diocesan Development Services (DDS), based in Kogi State, Nigeria, and a major development donor based in Europe that led to the establishment of a programme designed to promote the Virtues of a tobacco-based insecticide to small-scale farmers. The Tobacco Insecticide Programme (TIP) began in the late 1980s and ended in 200 1, absorbing significant quantities of resource in the process. TIP began with exploratory investigations of efficacy on the DDS seed multiplication farm followed by stages of researcher-managed and farmer-managed on-farm trials. A survey in 2002 assessed adoption of the technology by farmers. While yield benefits from using the insecticide were nearly always positive and statistically significant relative to an untreated control, they were not as good as commercial insecticides. However, adoption of the tobacco insecticide by local farmers was poor. The paper discusses the reasons for poor adoption, including relative benefits in gross margin, and uses the TIP example to explore the differing power relationships that exist between donors, their field partners and farmers. (C) 2004 by The Haworth Press, Inc. All rights reserved.

Reductions in insecticide use from adoption of Bt cotton in South Africa: impacts on economic performance and toxic load to the environment

The study reported presents the findings relating to commercial growing of genetically-modified Bt cotton in South Africa by a large sample of smallholder farmers over three seasons (1998/99, 1999/2000, 2000/01) following adoption. The analysis presents constructs and compares groupwise differences for key variables in Bt v. non-Bt technology and uses regressions to further analyse the production and profit impacts of Bt adoption. Analysis of the distribution of benefits between farmers due to the technology is also presented. In parallel with these socio-economic measures, the toxic loads being presented to the environment following the introduction of Bt cotton are monitored in terms of insecticide active ingredient (ai) and the Biocide Index. The latter adjusts ai to allow for differing persistence and toxicity of insecticides. Results show substantial and significant financial benefits to smallholder cotton growers of adopting Bt cotton over three seasons in terms of increased yields, lower insecticide spray costs and higher gross margins. This includes one particularly wet, poor growing season. In addition, those with the smaller holdings appeared to benefit proportionately more from the technology (in terms of higher gross margins) than those with larger holdings. Analysis using the Gini-coefficient suggests that the Bt technology has helped to reduce inequality amongst smallholder cotton growers in Makhathini compared to what may have been the position if they had grown conventional cotton. However, while Bt growers applied lower amounts of insecticide and had lower Biocide Indices (per ha) than growers of non-Bt cotton, some of this advantage was due to a reduction in non-bollworm insecticide. Indeed, the Biocide Index for all farmers in the population actually increased with the introduction of Bt cotton. The results indicate the complexity of such studies on the socio-economic and environmental impacts of GM varieties in the developing world.

A review of the use of demonstration projects to achieve widespread adoption of innovative practices

The UK construction industry has embarked on one of the largest experiments in the implementation of innovative technologies and practices in its history. Following Rethinking Construction[1], generally known as the Egan Report, the Movement for Innovation was established with the aim of using demonstration projects as practical examples of innovation in order to encourage others to follow the example. The number of demonstration projects has exceeded the original plans and more are being added. This paper reviews the approach in terms of the practice of using demonstration projects to achieve widespread take up of innovation, the modifications to the programme and its management and considers future developments to improve its, effectiveness.

Implementation of VR systems: a comparison between the early adoption of CAD and current uptake of VR

Use of new technologies, such as virtual reality (VR), is important to corporations, yet understanding of their successful implementation is insuf. ciently developed. In this paper a case study is used to analyse the introduction of VR use in a British housebuilding company. Although the implementation was not successful in the manner initially anticipated, the study provides insight into the process of change, the constraints that inhibit implementation and the relationship between new technology and work organization. Comparison is made with the early use of CAD and similarities and differences between empirical . ndings of the case study and the previous literature are discussed.

Consequences of a coexistence policy on the adoption of GMHT crops in the European Union

This article examines the adoption of genetically modified herbicide tolerant (GMHT) crops in the European Union (EU) prior to its commercial release. A set of potential drivers including the implementation of coexistence measures by farmers, farmers’ own motivational factors (e.g. economic, environmental and technical factors) and perceived social pressure to accept or reject adoption may influence European Union farmers’ willingness to adopt GMHT oilseed rape and GMHT maize. The analysis includes economic and sociological factors. Results show that coexistence measures may hamper GMHT adoption in the EU.

Adoption of ICT among small business: vision vs. reality

The aim of this paper is to present a case study of the adoption of Information and Communication Technologies (ICT) among 6000 small businesses within a locality of Greater Manchester, England. The paper presents an analysis of factors affecting adoption and discusses the wider implications for achieving the European vision of regional 'digital ecosystems".

Evaluating the likelihood of the adoption of an animal welfare assessment system in European agri-food supply chains

Purpose – The purpose of this paper is to analyse the likelihood of adoption of a recently designed Welfare Assessment System in agri-food supply chains and the factors affecting the adoption decision. The application is carried out for pig and poultry chains. Design/methodology/approach – This research consisted of two main components: interviews with retailers in pig and poultry supply chains in eight different EU countries to explore their perceptions towards the adoption possibilities of the welfare assessment system; and a conjoint analysis designed to evaluate the perceived adoption likelihood of the assessment system by different Standards Formulating Organisations (SFOs). Findings – Stakeholders were found to be especially concerned about the costs of implementation of the system and how it could, or should, be merged with existing assurance schemes. Another conclusion of the study is that the presence of a strong third independent party supporting the implementation of the welfare assessment system would be the most important influence on the decision whether, or not, to adopt it. Originality/value – This research evaluates the adoption possibilities of a novel Welfare Assessment System and presents the views of different supply chain stakeholders on an adoption of such a system. The main factors affecting the adoption decision are identified and analysed. Contrary to expectations, the costs of adoption of a new welfare assessment system were not considered to be the most important factor affecting the decision of supply chain stakeholders about the adoption of this new welfare system.