Facile bisurethane supramolecular polymers containing flexible alicyclic receptor units

This paper details the synthesis, characterisation and physical analyses of a series of hydrogen bonded urethane supramolecular polymer systems that are created by a facile one-step synthesis from inexpensive and commercially available starting materials. We report the synthesis and characterisation of a series of low molecular weight bisurethanes (<650 a.m.u.) that exhibit physical properties in the bulk that are characteristic of polyurethane materials possessing far higher molecular weight. The physical characteristics of these low molecular weight bisurethanes were investigated by using temperature-dependent rheological analysis and viscometry and the nature in which these compounds assembled was assessed using IR and NMR spectroscopies. These studies reveal that these simple bisurethanes self-assemble via hydrogen bonding interactions.

Bis(hydroxy-isoindolinone)s: synthesis, stereochemistry, polymer chemistry, and supramolecular assembly

Pseudoacid chlorides of 2,5-bis(4-fluorobenzoyl) terephthalic acid and 4,6-bis(4-fluorobenzoyl) isophthalic acid condense with primary amines to afford diastereomeric bis(hydroxyindolinone)s in good isolated yields and with diamines to give high molecular weight poly(hydroxyindolinone)s. Bis-N-pyrenemethyl bis(hydroxyindolinone)s assemble, even in dipolar solvents such as DMSO, with macrocyclic diimide-sulfones to give [3]pseudorotaxanes stabilized by electronically complementary aromatic π−π-stacking and shape-complementary van der Waals interactions.

Alternative syntheses of linear polyurethanes using masked isocyanate monomers

A range of linear polyurethanes featuring aliphatic, aromatic and ether residues have been prepared by co-polymerisation of novel 'masked' isocyanate A(2)-type monomers and diols. The reactive isocyanate monomers were generated in situ via the triphenylphosphine mediated decomposition of the heterocyclic disulfide, 1,2,4-dithiazolidine-3,5-dione. Two different synthetic approaches were examined and assessed for the construction of the novel A(2)-type monomers, which involved either coupling two 1,2,4-dithiazolidine-3,5-diones together through a spacer group or construction of 1,2,4-dithiazolidine-3,5-diones directly from diamines. The resulting polyurethanes were purified via solvent extraction and analysed using GPC, NMR and IR spectroscopic analyses. Molecular weight data were obtained and compared from both GPC and H-1 NMR (via end-group analysis) spectroscopic analysis. The thermal properties of the polyurethanes were determined using DSC and their solubility in common aprotic organic solvents was also assessed and related to their structural composition. (c) 2006 Elsevier B.V. All rights reserved.

A general synthesis of macrocyclic pi-electron-acceptor systems

Cyclocondensations of aromatic diamines with 1,1'-bis(2,4-dinitrophenyl)-4,4'-bipyridinium salts afford doubly or quadruply charged, macrocyclic, N,N'-diarylbipyridinium cations. These are tolerant of a wide range of acids, bases, and nucleophiles, although they appear to undergo reversible, one-electron reduction by tertiary amines. Single-crystal X-ray analysis demonstrates the presence of a macrocycle conformation in which the 4,4'-bipyridinium and 4,4'-biphenylenedisulfonyl residues are suitably spaced and aligned for complexation with pi-donor arenes, and NMR studies in solution indeed confirm binding to 1,5-bis[hydroxy(ethoxy)ethoxy]naphthalene.

Self-assembly of two-component gels: stoichiometric control and component selection

Two-component systems capable of self-assembling into soft gel-phase materials are of considerable interest due to their tunability and versatility. This paper investigates two-component gels based on a combination of a L-lysine-based dendron and a rigid diamine spacer (1,4-diaminobenzene or 1,4-diaminocyclohexane). The networked gelator was investigated using thermal measurements, circular dichroism, NMR spectroscopy and small angle neutron scattering (SANS) giving insight into the macroscopic properties, nanostructure and molecular-scale organisation. Surprisingly, all of these techniques confirmed that irrespective of the molar ratio of the components employed, the "solid-like" gel network always consisted of a 1:1 mixture of dendron/diamine. Additionally, the gel network was able to tolerate a significant excess of diamine in the "liquid-like" phase before being disrupted. In the light of this observation, we investigated the ability of the gel network structure to evolve from mixtures of different aromatic diamines present in excess. We found that these two-component gels assembled in a component-selective manner, with the dendron preferentially recognising 1,4-diaminobenzene (>70%). when similar competitor diamines (1,2- and 1,3-diaminobenzene) are present. Furthermore, NMR relaxation measurements demonstrated that the gel based oil 1,4-diaminobenzene was better able to form a selective ternary complex with pyrene than the gel based oil 1,4-diaminocyclohexane, indicative of controlled and selective pi-pi interactions within a three-component assembly. As such, the results ill this paper demonstrate how component selection processes in two-component gel systems call control hierarchical self-assembly.

Incorporation of a sodium ion guest in the host of copper(II)-Schiff-base complexes: Structural characterization and magnetic study

Three copper(II) complexes, [CuL1], [CuL2] and [CuL3] where L-1, L-2 and L-3 are the tetradentate di-Schiff-base ligands prepared by the condensation of acetylacetone and appropriate diamines (e.g. 1,2-diaminoethane, 1,2-diaminopropane and 1,3-diaminopropane, respectively) in 2:1 ratios, have been prepared. These complexes act as host molecules and include a guest sodium ion by coordinating through the oxygen atoms to result in corresponding new trinuclear complexes, [(CuL1)(2)Na(ClO4)(H2O)][CuL1], [(CuL2)(2)Na(ClO4)(H2O)] (2) and [(CuL3)(2)Na(ClO4)(H2O)] (3) when crystallized from methanol solution containing sodium perchlorate. All three complexes have been characterized by single crystal X-ray crystallography. In all the complexes, the sodium cation has a six-coordinate distorted octahedral environment being bonded to four oxygen atoms from two Schiff-base complexes of Cu(II) in addition to a perchlorate anion and a water molecule. The copper atoms are four coordinate in a square planar environment being bonded to two oxygen atoms and two nitrogen atoms of the Schiff-base ligand. The variable temperature susceptibilities for complexes 1-3 were measured over the range 2-300 K. The isotropic Hamiltonian, H = g(1)beta HS1 + g(2)beta HS2 + J(12)S(1)S(2) + g(3)beta HS3 for complex 1 and H = g(1)beta HS1 + g2 beta HS2 +J(12)S(1)S(2) for complexes 2 and 3 has been used to interpret the magnetic data. The best fit parameters obtained are: g(1) = g(2) = 2.07(0), J = - 1.09(1) cm(-1) for complex 1, g(1) = g(2) = 2.06(0), J = -0.55(1) cm(-1) for complex 2 and g1 = g2 = 2.07(0).J = -0.80(1) cm(-1) for 3. Electrochemical studies displayed an irreversible Cu(II)/Cu(I) one-electron reduction process. (C) 2008 Elsevier Ltd. All rights reserved.

Influence of sulfur amino acids on the volatile and nonvolatile components of cooked salmon (Salmo salar)

Volatile and nonvolatile compounds, which could contribute to flavor, were analyzed in salmon. One hundred twenty-three volatile compounds were identified in the headspace of two different samples of cooked salmon, including lipid-derived volatiles, Maillard-derived volatiles, sulfur volatiles, Strecker aldehydes, nitrogen heterocyclic compounds, terpenes, and trimethylamine. Significant differences between samples were found for 104 of the volatiles. Although the levels of free cysteine and methionine were low in the salmon, sulfur volatiles were formed in the cooked fish, demonstrating that there were sufficient sulfur amino acids present for their formation. Notable differences in sulfur compounds between the samples suggested that small changes in sulfur amino acids could be responsible. When this hypothesis was tested, salmon heated with cysteine had increased levels of many thiophenes, thiazoles, alicyclic sulfides, and nitrogen heterocycles. With the addition of methionine, levels of dimethyl sulfides, two alicyclic sulfides, pyrazines, some unsaturated aldehydes, and alcohols and 2-furanmethanethiol increased. The largest difference found among the nonvolatile (low molecular weight water-soluble) compounds was in inosine monophosphate.

Volatile flavour profile of goat meat extracted by three widely used techniques

Three procedures for the isolation of volatiles from grilled goat meat were compared: dynamic headspace entrainment on Tenax TA, simultaneous steam distillation-extraction, and solid-phase microextraction. Headspace entrainment on Tenax TA extracted the highest number of Maillard-derived volatile compounds. Two hundred and three volatile components were identified: 159 are reported for the first time in goat meat. Most of the volatiles detected (155) were lipid oxidation products, such as hydrocarbons, aldehydes, alcohols, ketones, carboxylic acids and esters. Forty-eight Maillard-derived compounds were identified. comprising pyrazines, pyrroles, thiophenes, furanthiol derivatives, alkyl and alicyclic sulphides, pyridines, and thiazoles. Some reported character impact compounds of cooked meat, e.g., 12-methyltridecanal, (EE)-2,4-decadienal, methional, and dimethyl trisulphide were identified in the volatile profile of goat meat, together with a series of C-2 to C-5 alkylformylcyclopentenes, which have been reported in cooked chicken, pork, beef and lamb, as being important for the characteristic flavour impression of different animal species. (C) 2009 Published by Elsevier Ltd.

Apparent specific volumes and tastes of cyclamates, other sulfamates, saccharins and acesulfame sweeteners

Measurements of apparent specific volume (ASV) for a series of alternative sweeteners (cyclamates, sulfamates, saccharins, acesulfames and anilinomethanesulfonates) have been made. Taste data have been obtained for many of the new compounds unless the toxicity of the associated metals precluded this. Apparent molar volume (AMV), isentropic specific (IASC) and isentropic molar (IAMC) compressibilities were also measured. Sixteen metallic cyclamates cyc-C6H11NHSO3M and two phenylsulfamates ArNHSO3Na, namely 3.5-dimethyl- and 3,4-dimethoxyphenylsulfamates have been examined. When the ASVs for these are combined with those for 15 aliphatic, aromatic and alicyclic sulfamates from a previous study, many of the values are seen to fall into the region that was previously identified as being the "sweet area", i.e. the ASVs lay between similar to0.5 and similar to0.7 (a few sweet compounds fall below this range and it is suggested that it could be extended slightly to accommodate these). Interestingly, the anilinomethanesulfonates, ArNHCH2SO3Na (Ar = C6H5-, 3-MeC6H4- and 3-ClC6H4-) lie clearly in the sweet region but only one of them shows slight sweetness showing that the molecular structural change made (compared with the 'parent' sulfamate-NHSO3-) cannot be accommodated at the receptor site. (C) 2003 Elsevier Ltd. All rights reserved.

Efficient access to conjugated 4,4’-bipyridinium oligomers using the Zincke reaction: synthesis, spectroscopic and electrochemical properties

The cyclocondensation reaction between rigid, electron-rich aromatic diamines and 1,1′-bis(2,4-dinitrophenyl)-4,4′-bipyridinium (Zincke) salts has been harnessed to produce a series of conjugated oligomers containing up to twelve aromatic/heterocyclic residues. These oligomers exhibit discrete, multiple redox processes accompanied by dramatic changes in electronic absorption spectra.