Changes in reactive stratospheric gases due to a change in Brewer–Dobson circulation: results from a simple model

Amounts of source gases with stratospheric sinks (CFCs, N2O, CH4) are affected by changes in Brewer–Dobson circulation. Source gases and their degradation products are important for atmospheric chemistry and climate. With a simple model, we examine how amounts and lifetimes of source gases and products depend on speed of the circulation. Transient results differ from steady-state and stratospheric results differ from those for stratosphere plus troposphere. Increases in speed increase the stratospheric burden of source gases, but reduce products and reduce total burdens and lifetimes of source gases

Time valued life cycle greenhouse gas emissions from buildings

The UK has adopted legally binding carbon reduction targets of 34% by 2020 and 80% by 2050 (measured against the 1990 baseline). Buildings are estimated to be responsible for more than 50% of greenhouse gas (GHG) emissions in the UK. These consist of both operational, produced during use, and embodied, produced during manufacture of materials and components, and during construction, refurbishments and demolition. A brief assessment suggests that it is unlikely that UK emission reduction targets can be met without substantial reductions in both Oc and Ec. Oc occurs over the lifetime of a building whereas the bulk of Ec occurs at the start of a building’s life. A time value for emissions could influence the decision making process when it comes to comparing mitigation measures which have benefits that occur at different times. An example might be the choice between building construction using low Ec construction materials versus building construction using high Ec construction materials but with lower Oc, although the use of high Ec materials does not necessarily imply a lower Oc. Particular time related issues examined here are: the urgency of the need to achieve large emissions reductions during the next 10 to 20 years; the earlier effective action is taken, the less costly it will be; future reduction in carbon intensity of energy supply; the carbon cycle and relationship between the release of GHG’s and their subsequent concentrations in the atmosphere. An equation is proposed, which weights emissions according to when they occur during the building life cycle, and which effectively increases Ec as a proportion of the total, suggesting that reducing Ec is likely to be more beneficial, in terms of climate change, for most new buildings. Thus, giving higher priority to Ec reductions is likely to result in a bigger positive impact on climate change and mitigation costs.

Syntheses, spectroelectrochemical studies, and molecular and electronic structures of ferrocenyl ene-diynes

The readily available complex 1,1-dibromo-2-ferrocenylethylene provides a convenient entry point for the preparation of a wide range of cross-conjugated 1,1-bis(alkynyl)-2-ferrocenylethenes through simple Pd(0)/Cu(I)-mediated cross-coupling reactions with 1-alkynes. The ferrocene moiety in compounds of the general form FcCHC(CCR)2 is essentially electronically isolated from the cross-conjugated π system, as evidenced by IR and UV−vis spectroelectrochemical experiments and quantum chemical calculations. In contrast to the other examples which give stable ferrocenium derivatives upon electrochemical oxidation, the aniline derivatives [FcCHC(CCC6H4NH2-4)2]+ and [FcCHC(CCC6H4NMe2-4)2]+ proved to be unstable on the time scale of the spectroelectrochemical experiments, leading to passivation of the electrode surface over time. There is no significant thermodynamic stabilization of the radical anion [FcCHC(CCC6H4NO2-4)2]− relative to the neutral and dianionic analogues, although the dianion [FcCHC(CCC6H4NO2- 4)2]2− could be studied as a relatively chemically stable species and is well described in terms of two linked nitrophenyl radicals. The capacity to introduce a relatively isolated point charge at the periphery of the cross-conjugated π system appears to make these complexes useful templates for the construction of electrochemically gated quantum interference transistors.

Postmodernism, culture and feminism: the aesthetics of space and performance in Rock Follies and Rock Follies of '77

This article discusses the aesthetic and spatial representational strategies of the popular studio-based musical television drama serials Rock Follies and Rock Follies of ’77. It analyses how the texts’ themes relating to women and the entertainment industry are mediated through their postmodern ironic mode and representation of fantastic spaces. Rock Follies’ distinctive stylised aesthetic and mode of caricature are analysed with reference to the visual intentions and ‘voice’ of the writer, Howard Schuman. Through considering the programmes’ various spatial strategies, the article draws attention to the importance of visual and performance style in their postmodern discourse on culture, fantasy, gender and subjectivity. Analysis of the spaces of musical performance, characters’ domestic environments and simulated entertainment spaces reveals how a dialectic is established between the escapist imaginative pleasures of fantasy and the manipulative and exploitative practices of the culture industry. The shift from the optimism of the first series, when the LittleLadies first form, to the darker mood of the second series, in which they are increasingly divided by industry pressures, is traced through changes in the aesthetics of space and characterisation. As a space of artifice, performance and electronic visual manipulation that facilitates the texts’ reflexive representation of culture and feminised fantasy, the studio’s unique aesthetic strengths emerge through this case study.

Influence of UV radiation on chlorophyll, and antioxidant enzymes of wetland plants in different types of constructed wetland

A surface- and vertical subsurface-flow-constructed wetland were designed to study the response of chlorophyll and antioxidant enzymes to elevated UV radiation in three types of wetland plants (Canna indica, Phragmites austrail, and Typha augustifolia). Results showed that (1) chlorophyll content of C. indica, P. austrail, and T. augustifolia in the constructed wetland was significantly lower where UV radiation was increased by 10 and 20 % above ambient solar level than in treatment with ambient solar UV radiation (p < 0.05). (2) The malondialdehyde (MDA) content, guaiacol peroxidase (POD), superoxide dismutase (SOD), and catalase (CAT) activities of wetland plants increased with elevated UV radiation intensity. (3) The increased rate of MDA, SOD, POD, and CAT activities of C. indica, P. australis, and T. angustifolia by elevated UV radiation of 10 % was higher in vertical subsurface-flow-constructed wetland than in surface-flow-constructed wetland. The sensitivity of MDA, SOD, POD, and CAT activities of C. indica, P. austrail, and T. augustifolia to the elevated UV radiation was lower in surface-flow-constructed wetland than in the vertical subsurface-flow-constructed wetland, which was related to a reduction in UV radiation intensity through the dissolved organic carbon and suspended matter in the water. C. indica had the highest SOD and POD activities, which implied it is more sensitive to enhanced UV radiation. Therefore, different wetland plants had different antioxidant enzymes by elevated UV radiation, which were more sensitive in vertical subsurface-flow-constructed wetland than in surface-flow-constructed wetland.

Multivalency in healable supramolecular polymers: the effect of supramolecular cross-link density on the mechanical properties and healing of noncovalent polymer networks

Polymers with the ability to heal themselves could provide access to materials with extended lifetimes in a wide range of applications such as surface coatings, automotive components and aerospace composites. Here we describe the synthesis and characterisation of two novel, stimuli-responsive, supramolecular polymer blends based on π-electron-rich pyrenyl residues and π-electron-deficient, chain-folding aromatic diimides that interact through complementary π–π stacking interactions. Different degrees of supramolecular “cross-linking” were achieved by use of divalent or trivalent poly(ethylene glycol)-based polymers featuring pyrenyl end-groups, blended with a known diimide–ether copolymer. The mechanical properties of the resulting polymer blends revealed that higher degrees of supramolecular “cross-link density” yield materials with enhanced mechanical properties, such as increased tensile modulus, modulus of toughness, elasticity and yield point. After a number of break/heal cycles, these materials were found to retain the characteristics of the pristine polymer blend, and this new approach thus offers a simple route to mechanically robust yet healable materials.

Cocrystalline copolyimides of poly(ethylene 2,6-naphthalate)

Copolycondensation of N,N′-bis(2-hydroxyethyl)-biphenyl-3,4,3′,4′-tetracarboxylic diimide (5–25 mol %) with bis(2-hydroxyethyl)-2,6-naphthalate affords a series of cocrystalline, poly(ethylene 2,6-naphthalate) (PEN)-based poly(ester imide)s. The glass transition temperature rises with the level of comonomer, from 118 °C for PEN itself to 148 °C for the 25% diimide copolymer. X-ray powder and fiber diffraction studies show that, when 5 mol % or more of diimide is present, the α-PEN crystal structure is replaced by a new crystalline phase arising from isomorphic substitution of biphenyldiimide for PEN residues in the polymer crystal lattice. This new phase is provisionally identified as monoclinic, C2/m, with two chains per unit cell, a = 10.56, b = 6.74, c = 13.25 Å, and β = 143.0°.

Ring-opening polymerization in molten PEEK: transient reduction of melt-viscosity by macrocyclic aromatic thioetherketones

Blends of PEEK with macrocyclic thioether-ketones show initial melt-viscosities reduced by more than an order of magnitude relative to the polymer itself, enabling more facile processing and fabrication. On raising the temperature of the melt, however, the macrocycle undergoes spontaneous, entropically-driven ring-opening polymerization (ED-ROP), so that the properties of the final polymer should not, in principle, be compromised by the presence of low-MW macrocyclic material.

'Mental mobility’ in the digital age: entrepreneurs and the online home-based business

Home-based online business ventures are an increasingly pervasive yet under-researched phenomenon. The experiences and mindset of entrepreneurs setting up and running such enterprises require better understanding. Using data from a qualitative study of 23 online home-based business entrepreneurs, we propose the augmented concept of ‘mental mobility’ to encapsulate how they approach their business activities. Drawing on Howard P. Becker's early theorising of mobility, together with Victor Turner's later notion of liminality, we conceptualise mental mobility as the process through which individuals navigate the liminal spaces between the physical and digital spheres of work and the overlapping home/workplace, enabling them to manipulate and partially reconcile the spatial, temporal and emotional tensions that are present in such work environments. Our research also holds important applications for alternative employment contexts and broader social orderings because of the increasingly pervasive and disruptive influence of technology on experiences of remunerated work.

Design of a computerised treatment for short-term memory deficits in aphasia

The treatment of auditory-verbal short-term memory (STM) deficits in aphasia is a growing avenue of research (Martin & Reilly, 2012; Murray, 2012). STM treatment requires time precision, which is suited to computerised delivery. We have designed software, which provides STM treatment for aphasia. The treatment is based on matching listening span tasks (Howard & Franklin, 1990), aiming to improve the temporal maintenance of multi-word sequences (Salis, 2012). The person listens to pairs of word-lists that differ in word-order and decides if the pairs are the same or different. This approach does not require speech output and is suitable for persons with aphasia who have limited or no output. We describe the software and how its review from clinicians shaped its design.

Supramolecular materials for inkjet printing: self-assembling polymer networks

Electronically complementary, low molecular weight polymers that self-assemble through tuneable π-π stacking interactions to form extended supramolecular polymer networks have been developed for inkjet printing applications and successfully deposited using three different printing techniques. Sequential overprinting of the complementary components results in supramolecular network formation through complexation of π-electron rich pyrenyl or perylenyl chain-ends in one component with π-electron deficient naphthalene diimide residues in a chain-folding polyimide. The complementary π-π stacked polymer blends generate strongly coloured materials as a result of charge-transfer absorptions in the visible spectrum, potentially negating the need for pigments or dyes in the ink formulation. Indeed, the final colour of the deposited material can be tailored by changing varying the end-groups of the π electron rich polymer component. Piezoelectric printing techniques were employed in a proof of concept study to allow characterisation of the materials deposited, and a thermal inkjet printer adapted with imaging software enabled a detailed analysis of the ink-drops as they formed, and of their physical properties. Finally, continuous inkjet printing allowed greater volumes of material to be deposited, on a variety of different substrate surfaces, and demonstrated the utility and versatility of this novel type of ink for industrial applications.

Traditional medicine use by cancer patients in Thailand

Ethnobotanical relevance Cancer patients commonly use traditional medicines (TM) and in Thailand these are popular for both self-medication and as prescribed by TM practitioners, and are rarely monitored. A study was conducted at Wat Khampramong, a Thai Buddhist temple herbal medicine hospice, to document some of these practices as well as the hospice regime. Materials and methods Cancer patients (n=286) were surveyed shortly after admission as to which TMs they had previously taken and perceptions of effects experienced. They were also asked to describe their current symptoms. Treatment at the hospice is built upon an 11-herb anti-cancer formula, yod-ya-mareng, prescribed for all patients, and ideally, its effects would have been evaluated. However other herbal medicines and holistic practices are integral to the regime, so instead we attempted to assess the value of the patients׳ stay at the hospice by measuring any change in symptom burden, as they perceived it. Surviving patients (n=270) were therefore asked to describe their symptoms again just before leaving. Results 42% of patients (120/286; 95% CI 36.4%, 47.8%) had used herbal medicines before their arrival, with 31.7% (38/120; 95% CI 24%, 40.4%) using several at once. Mixed effects were reported for these products. After taking the herbal regime at Khampramong, 77% (208/270 95% CI; 71.7%, 81.7%) reported benefit, and a comparison of the incidence of the most common (pain, dyspepsia, abdominal or visceral pain, insomnia, fatigue) showed statistical significance (χ2 57.1, df 7, p<0.001). Conclusions A wide range of TMs is taken by cancer patients in Thailand and considered to provide more benefit than harm, and this perception extends to the temple regime. Patients reported a significant reduction in symptoms after staying at Khampramong, indicating an improvement in quality of life, the aim of hospices everywhere. Based on this evidence, it is not possible to justify the use of TM for cancer in general, but this study suggests that further research is warranted. The uncontrolled use of TMs, many of which are uncharacterised, raises concerns, and this work also highlights the fact that validated, robust methods of assessing holistic medical regimes are urgently needed.

Perylene as an electron-rich moiety in healable, complementary π–π stacked, supramolecular polymer systems

A two-component, supramolecular polymer blend has been designed using a novel π-electron rich bisperylene- terminated polyether. This polymer is able to self-assemble through electronically complementary π–π stacking interactions with a π-electron-deficient chain-folding polydiimide to afford thermally healable polymer blends. Model compounds were developed to assess the suitability of the deep green complexes formed between perylene residues and chain-folding bis-diimides for use in polymer blends. The polymer blends thus synthesised were elastomeric in nature and demonstrated healable properties as demonstrated by scanning electron microscopy. Healing was observed to occur rapidly at ca. 75 degC, and excellent healing efficiencies were found by tensometric and rheometric analyses. These tuneable, stimuli-responsive, supramolecular polymer blends are compared to related healable blends featuring pyrene-terminated oligomers.

Mesomorphic behaviour in copoly(ester-imide)s of poly(butylene-2,6-naphthalate) (PBN)

Copolycondensation of N,N’-bis(4-hydroxybutyl)-biphenyl-3,4,3',4'-tetracarboxylic diimide at 20 and 25 mol% with bis(4-hydroxybutyl)-2,6-naphthalate produces PBN-based copoly(ester-imide)s that not only crystallise but also form a (smectic) mesophase upon cooling from the melt. Incorporation of 25 mol% imide in PBN causes the glass transition temperature (measured by DSC) to rise from 51 to 74 °C, a significant increase relative to PBN. Furthermore, increased storage- (G'), loss- (G'') and elastic (E) moduli are observed for both copoly(ester-imide)s when compared to PBN itself. Structural analysis of the 20 mol% copolymer by X-ray powder and fibre diffraction, interfaced to computational modelling, suggests a crystal structure related to that of α-PBN, in space group P-1, with cell dimensions a = 4.74, b = 6.38, c = 14.45 Å, α = 106.1, β = 122.1, γ = 97.3°, ρ = 1.37 g cm-3.