The consumer acceptance of novel vegetable-enriched bread products as a potential vehicle to increase vegetable consumption

Currently UK fruit and vegetable intakes are below recommendations. Bread is a staple food consumed by ~95% of adults in western countries. In addition, bread provides an ideal matrix by which functionality can be delivered to the consumer in an accepted food. Therefore, enriching bread with vegetables may be an effective strategy to increase vegetable consumption. This study evaluated consumer acceptance, purchase intent and intention of product replacement of bread enriched with red beetroot, carrot with coriander, red pepper with tomato or white beetroot (80g vegetable per serving of 200g) compared to white control bread (0g vegetable). Consumers (n=120) rated their liking of the breads overall, as well as their liking of appearance, flavour and texture using nine-point hedonic scales. Product replacement and purchase intent of the breads was rated using five-point scales. The effect of providing consumers with health information about the breads was also evaluated. There were significant differences in overall liking (P<0.0001), as well as liking of appearance (P<0.0001), flavour (P=0.0002) and texture (P=0.04), between the breads. However, the significant differences resulted from the red beetroot bread which was significantly (P<0.05) less liked compared to control bread. There were no significant differences in overall liking between any of the other vegetable-enriched breads compared with the control bread (no vegetable inclusion), apart from the red beetroot bread which was significantly less liked. The provision of health information about the breads did not increase consumer liking of the vegetable-enriched breads. In conclusion, this study demonstrated that vegetable-enriched bread appeared to be an acceptable strategy to increase vegetable intake, however, liking depended on vegetable type.

Evaluation of ERA-Interim reanalysis precipitation products using England and Wales observations

Precipitation forecast data from the ERA-Interim reanalysis (33 years) are evaluated using the daily England and Wales Precipitation (EWP) observations obtained from a rain gauge network. Observed and reanalysis daily precipitation data are both described well by Weibull distributions with indistinguishable shapes but different scale parameters, such that the reanalysis underestimates the observations by an average factor of 22%. The correlation between the observed and ERA-Interim time series of regional, daily precipitation is 0.91. ERA-Interim also captures the statistics of extreme precipitation including a slightly lower likelihood of the heaviest precipitation events (>15 mm day− 1 for the regional average) than indicated by the Weibull fit. ERA-Interim is also closer to EWP for the high precipitation events. Since these carry weight in longer accumulations, a smaller underestimation of 19% is found for monthly mean precipitation. The partition between convective and stratiform precipitation in the ERA-Interim forecast is also examined. In summer both components contribute equally to the total precipitation amount, while in winter the stratiform precipitation is approximately double convective. These results are expected to be relevant to other regions with low orography on the coast of a continent at the downstream end of mid-latitude stormtracks.

Evaluation of high-resolution surface wind products at global and regional scales

High resolution surface wind fields covering the global ocean, estimated from remotely sensed wind data and ECMWF wind analyses, have been available since 2005 with a spatial resolution of 0.25 degrees in longitude and latitude, and a temporal resolution of 6h. Their quality is investigated through various comparisons with surface wind vectors from 190 buoys moored in various oceanic basins, from research vessels and from QuikSCAT scatterometer data taken during 2005-2006. The NCEP/NCAR and NCDC blended wind products are also considered. The comparisons performed during January-December 2005 show that speeds and directions compare well to in-situ observations, including from moored buoys and ships, as well as to the remotely sensed data. The root-mean-squared differences of the wind speed and direction for the new blended wind data are lower than 2m/s and 30 degrees, respectively. These values are similar to those estimated in the comparisons of hourly buoy measurements and QuickSCAT near real time retrievals. At global scale, it is found that the new products compare well with the wind speed and wind vector components observed by QuikSCAT. No significant dependencies on the QuikSCAT wind speed or on the oceanic region considered are evident.Evaluation of high-resolution surface wind products at global and regional scales

Control of final moisture content of food products baked in continuous tunnel ovens

There are well-known difficulties in making measurements of the moisture content of baked goods (such as bread, buns, biscuits, crackers and cake) during baking or at the oven exit; in this paper several sensing methods are discussed, but none of them are able to provide direct measurement with sufficient precision. An alternative is to use indirect inferential methods. Some of these methods involve dynamic modelling, with incorporation of thermal properties and using techniques familiar in computational fluid dynamics (CFD); a method of this class that has been used for the modelling of heat and mass transfer in one direction during baking is summarized, which may be extended to model transport of moisture within the product and also within the surrounding atmosphere. The concept of injecting heat during the baking process proportional to the calculated heat load on the oven has been implemented in a control scheme based on heat balance zone by zone through a continuous baking oven, taking advantage of the high latent heat of evaporation of water. Tests on biscuit production ovens are reported, with results that support a claim that the scheme gives more reproducible water distribution in the final product than conventional closed loop control of zone ambient temperatures, thus enabling water content to be held more closely within tolerance.

Ozonolysis of methyl oleate monolayers at the air–water interface: oxidation kinetics, reaction products and atmospheric implications

Ozonolysis of methyl oleate monolayers at the air–water interface results in surprisingly rapid loss of material through cleavage of the C[double bond, length as m-dash]C bond and evaporation/dissolution of reaction products. We determine using neutron reflectometry a rate coefficient of (5.7 ± 0.9) × 10−10 cm2 molecule−1 s−1 and an uptake coefficient of [similar]3 × 10−5 for the oxidation of a methyl ester monolayer: the atmospheric lifetime is [similar]10 min. We obtained direct experimental evidence that <2% of organic material remains at the surface on atmospheric timescales. Therefore known long atmospheric residence times of unsaturated fatty acids suggest that these molecules cannot be present at the interface throughout their ageing cycle, i.e. the reported atmospheric longevity is likely to be attributed to presence in the bulk and viscosity-limited reactive loss. Possible reaction products were characterized by ellipsometry and uncertainties in the atmospheric fate of organic surfactants such as oleic acid and its methyl ester are discussed. Our results suggest that a minor change to the structure of the molecule (fatty acid vs. its methyl ester) considerably impacts on reactivity and fate of the organic film.

Glucosinolates, myrosinase hydrolysis products, and flavonols found in rocket (Eruca sativa and Diplotaxis tenuifolia)

Rocket species have been shown to have very high concentrations of glucosinolates and flavonols, which have numerous positive health benefits with regular consumption. In this review we highlight how breeders and processors of rocket species can utilize genomic and phytochemical research to improve varieties and enhance the nutritive benefits to consumers. Plant breeders are increasingly looking to new technologies such as HPLC, UPLC, LC-MS and GC-MS to screen populations for their phytochemical content to inform plant selections. Here we collate the research that has been conducted to-date in rocket, and summarise all glucosinolate and flavonol compounds identified in the species. We emphasize the importance of the broad screening of populations for phytochemicals and myrosinase degradation products, as well as unique traits that may be found in underutilized gene bank resources. We also stress that collaboration with industrial partners is becoming essential for long-term plant breeding goals through research.

Knowledge intensive processes characteristics and improvement: a banking best practice example

This paper identifies characteristics of knowledge intensive processes and a method to improve their performance based on analysis of investment banking front office processes. The inability to improve these processes using standard process improvement techniques confirmed that much of the process was not codified and depended on tacit knowledge and skills. This led to the use of a semi-structured analysis of the characteristics of the processes via a questionnaire to identify knowledge intensive processes characteristics that adds to existing theory. Further work identified innovative process analysis and change techniques that could generate improvements based on an analysis of their properties and the issue drivers. An improvement methodology was developed to harness a number of techniques that were found to effective in resolving the issue drivers and improving these knowledge intensive processes.

State capitalism and social responsibility in China's banking industry

China’s financial system has experienced a series of major reforms in recent years. Efforts have been made towards introducing the shareholding system in state-owned commercial banks, restructuring of securities firms, re-organising equity of joint venture insurance companies, further improving the corporate governance structure, managing financial risks and ultimately establishing a system to protect investors (Xinhua, 2010). Financial product innovation, with the further opening up of financial markets and the development of the insurance and bond market, has increased liquidity as well as reduced financial risks. The U.S. subprime crisis indicated the benefit of financial innovations for the economy, but without proper control, they may lead to unexpected consequences. Kirkpatrick (2009) argues that failures and weaknesses in corporate governance arrangements and insufficient accounting standards and regulatory requirements attributed to the financial crisis. Similar to the financial crises of the last decade, the global financial crisis which sparked in 2008, surfaced a variety of significant corporate governance failures: the dysfunction of market mechanisms, the lack of transparency and accountability, misaligned compensation arrangements and the late response of government, all which encouraged management short-termism, poor risk management, as well as some fraudulent schemes. The unique characteristics of the Chinese banking system are an interesting point for studying post-crisis corporate governance reform. Considering that China modelled its governance system on the Anglo-American system, this paper examines the impact of the financial crisis on corporate governance reform in developed economies, and particularly, China’s reform of its financial sector. The paper further analyses the Chinese government’s role in bank supervision and risk management. In this regard, the paper contributes to the corporate governance literature within the Chinese context by providing insights into the contributing factors to the corporate governance failure that led to the global financial crisis. It also provides policy recommendations for China’s policy makers to seriously consider. The results suggest a need for the re-examination of corporate governance adequacy and the institutionalisation of business ethics. The paper’s next section provides a review of China’s financial system with reference to the financial crisis, followed by a critical evaluation of a capitalistic system and a review of Anglo-American and Continental European models. It then analyses the need for a new corporate governance model in China by considering the bank failures in developed economies and the potential risks and inefficiencies in a current State controlled system. The paper closes by reflecting the need for Chinese policy makers to continually develop, adapt and rewrite corporate governance practices capable of meeting the new challenge, and to pay attention to business ethics, an issue which goes beyond regulation.

The post-financial crisis challenges for corporate governance and banking reform in China

The purpose of this paper is to review the impact of the global financial crisis on banking reform in China. The significant doubt concerning the efficiencies of Anglo-American model of corporate governance has raised a critical political question amongst scholars and practitioners as to whether China should continue to follow the U.K.-U.S. path in relation to financial reform. This conceptual paper provides an insightful review of the corporate governance literature and regulatory reports. After examining the fundamental limitations of the laissez-faire philosophy that underpins the neo-liberal model of capitalism, which promotes greater liberalization and less control, the paper considers the risks in opening China’s financial markets and relaxing monetary and fiscal policies. A critique of shareholder-capitalism is outlined in relation to the German’s “social market economy” styled capitalism. Through such analysis the paper explores a number of implications for China to consider in terms of developing a new and sustainable corporate governance model applicable to the Chinese context.

Biomedical applications of hydrogels: a review of patents and commercial products

Hydrogels have become very popular due to their unique properties such as high water content, softness, flexibility and biocompatibility. Natural and synthetic hydrophilic polymers can be physically or chemically cross-linked in order to produce hydrogels. Their resemblance to living tissue opens up many opportunities for applications in biomedical areas. Currently, hydrogels are used for manufacturing contact lenses, hygiene products, tissue engineering scaffolds, drug delivery systems and wound dressings. This review provides an analysis of their main characteristics and biomedical applications. From Wichterle’s pioneering work to the most recent hydrogel-based inventions and products on the market, it provides the reader with a detailed introduction to the topic and perspective on further potential developments.

Bifidobacteria in milk products: An overview of physiological and biochemical properties, exopolysaccharide production, selection criteria of milk products and health benefits

Research and commercial interest in the genus Bifidobacterium have increased in the last decade due to their potential health benefits in probiotic functional foods, especially in dairy products. However, cultivation of bifidobacteria in milk is a difficult task compared with that of conventional starters because milk is not a good medium for growth of these nutritionally fastidious microorganisms. Therefore, suitable strains of Bifidobacterium for dairy products should be selected based on their safety and technological and functional properties. There are a number of milk products containing bifidobacteria in the world market and the demand for new products is increasing with the awareness of the potential health benefits of the consumption of products blended with bifidobacteria. Some strains of Bifidobacterium, which produce exopolysaccharide, have been isolated and characterised. This review will discuss the general characteristics of bifidobacteria, exopolysaccharide production, the selection criteria of bacterial strains for milk products, current applications of bifidobacteria in milk products, and their nutritional and beneficial health properties.

Milk and dairy products: dietary partners for life?

The importance of milk in the human diet as a supplier of energy, high quality protein and other key nutrients, including calcium, is broadly accepted yet in the mind of many there remains uncertainty about whether or not these foods contribute to increased risk of cardiovascular and other chronic diseases. The evidence from long term prospective cohort studies that high milk consumption does not increase cardiovascular disease risk and indeed may provide benefit is now pretty unequivocal, although the effects of butter and cheese and benefits of fat reduced milk and saturated fat reduced milk are less certain. Milk is a crucial supplier of calcium, phosphorus and magnesium for bone growth and development in children and it is concerning that due to reduced milk consumption intake of these nutrients is often sub-optimal, particularly for female children. In addition, specific health issues in pregnant women and the elderly can be alleviated by milk or components of milk and these effects are not all explained by traditional nutrition.

Sensory profiles and consumer acceptability of a range of sugar-reduced products on the UK market

Current UK intake of non-milk extrinsic sugars (NMES) is above recommendations. Reducing the sugar content of processed high sugar foods through reformulation is one option for reducing consumption of NMES at a population level. However, reformulation can alter the sensory attributes of food products and influence consumer liking. This study evaluated consumer acceptance of a selection of products that are commercially-available in the UK; these included regular and sugar-reduced baked beans, strawberry jam, milk chocolate, cola and cranberry & raspberry juice. Sweeteners were present in the reformulated chocolate (maltitol), cola (aspartame and acesulfame-K) and juice (sucralose) samples. Healthy, non-smoking consumers (n = 116; 55 men, 61 women, age: 33 ± 9 years; BMI: 25.7 ± 4.6 kg/m2) rated the products for overall liking and on liking of appearance, flavor and texture using a nine-point hedonic scale. There were significant differences between standard and reduced sugar products in consumers’ overall liking and on liking of each modality (appearance, flavor and texture; all P < 0.0001). For overall liking, only the regular beans and cola were significantly more liked than their reformulated counterparts (P < 0.0001). Cluster analysis identified three consumer clusters that were representative of different patterns of consumer liking. For the largest cluster (cluster 3: 45%), there was a significant difference in mean liking scores across all products, except jam. Differences in liking were predominantly driven by sweet taste in 2 out of 3 clusters. The current research has demonstrated that a high proportion of consumers prefer conventional products over sugar-reduced products across a wide range of product types (45%) or across selected products (27%), when tasted unbranded, and so there is room for further optimization of commercial reduced sugar products that were evaluated in the current study. Future work should evaluate strategies to facilitate compliance to dietary recommendations on NMES and free sugars, such as the impact of sugar-reduced food exposure on their acceptance.