Structural adjustment and subsistence industry: artisanal gold mining in Ghana

Since the implementation of Ghana's national Structural Adjustment Programme (SAP), policies associated with the programme have been criticized for perpetuating poverty within the country's subsistence economy. This article brings new evidence to bear on the contention that the SAP has both fuelled the uncontrolled growth of informal, poverty-driven artisanal gold mining and further marginalized its impoverished participants. Throughout the adjustment period, it has been a central goal of the government to promote the expansion of large-scale gold mining through foreign investment. Confronted with the challenge of resuscitating a deteriorating gold mining industry, the government introduced a number of tax breaks and policies in an effort to create an attractive investment climate for foreign multinational mining companies. The rapid rise in exploration and excavation activities that has since taken place has displaced thousands of previously-undisturbed subsistence artisanal gold miners. This, along with a laissez faire land concession allocation procedure, has exacerbated conflicts between mining parties. Despite legalizing small-scale mining in 1989, the Ghanaian government continues to implement procedurally complex and bureaucratically unwieldy regulations and policies for artisanal operators which have the effect of favouring the interests of established large-scale miners.

From saccades to smooth pursuit: real-time gaze control using motion feedback

The authors present an active vision system which performs a surveillance task in everyday dynamic scenes. The system is based around simple, rapid motion processors and a control strategy which uses both position and velocity information. The surveillance task is defined in terms of two separate behavioral subsystems, saccade and smooth pursuit, which are demonstrated individually on the system. It is shown how these and other elementary responses to 2D motion can be built up into behavior sequences, and how judicious close cooperation between vision and control results in smooth transitions between the behaviors. These ideas are demonstrated by an implementation of a saccade to smooth pursuit surveillance system on a high-performance robotic hand/eye platform.

Development of biomimetic squid-inspired suckers

Biomechanical properties of squid suckers were studied to provide inspiration for the development of sucker artefacts for a robotic octopus. Mechanical support of the rings found inside squid suckers was studied by bending tests. Tensile tests were carried out to study the maximum possible sucking force produced by squid suckers based on the strength of sucker stalks, normalized by the sucking areas. The squid suckers were also directly tested to obtain sucking forces by a special testing arrangement. Inspired by the squid suckers, three types of sucker artefacts were developed for the arm skin of an octopus inspired robot. The first sucker artefact made of knitted nylon sheet reinforced silicone rubber has the same shape as the squid suckers. Like real squid suckers, this type of artefact also has a stalk that is connected to the arm skin and a ring to give radial support.The second design is a straight cylindrical structure with uniform wall thickness made of silicone rubber. One end of the cylinder is directly connected to the arm skin and the other end is open. The final design of the sucker has a cylindrical base and a concave meniscus top. The meniscus was formed naturally using the surface tension of silicone gel, which leads to a higher level of the liquid around the edge of a container. The wall thickness decreases towards the tip of the sucker opening. Sucking forces of all three types of sucker artefacts were measured. Advantages and isadvantages of each sucker type were discussed. The final design of suckers has been implemented to the arm skin prototypes.

Experimental and modeled UV erthemal irradiance under overcast conditions: the role of cloud optical depth

This paper evaluates the relationship between the cloud modification factor (CMF) in the ultraviolet erythe- mal range and the cloud optical depth (COD) retrieved from the Aerosol Robotic Network (AERONET) "cloud mode" algorithm under overcast cloudy conditions (confirmed with sky images) at Granada, Spain, mainly for non-precipitating, overcast and relatively homogenous water clouds. Empirical CMF showed a clear exponential dependence on experimental COD values, decreasing approximately from 0.7 for COD=10 to 0.25 for COD=50. In addition, these COD measurements were used as input in the LibRadtran radia tive transfer code allowing the simulation of CMF values for the selected overcast cases. The modeled CMF exhibited a dependence on COD similar to the empirical CMF, but modeled values present a strong underestimation with respect to the empirical factors (mean bias of 22 %). To explain this high bias, an exhaustive comparison between modeled and experimental UV erythemal irradiance (UVER) data was performed. The comparison revealed that the radiative transfer simulations were 8 % higher than the observations for clear-sky conditions. The rest of the bias (~14 %) may be attributed to the substantial underestimation of modeled UVER with respect to experimental UVER under overcast conditions, although the correlation between both dataset was high (R2 ~ 0.93). A sensitive test showed that the main reason responsible for that underestimation is the experimental AERONET COD used as input in the simulations, which has been retrieved from zenith radiances in the visible range. In this sense, effective COD in the erythemal interval were derived from an iteration procedure based on searching the best match between modeled and experimental UVER values for each selected overcast case. These effective COD values were smaller than AERONET COD data in about 80 % of the overcast cases with a mean relative difference of 22 %.

Prehistoric activity in Peterstone Great Wharf Palaeochannels: field survey 2005-6

This is an interim report on research carried out at the intertidal site of Peterstone Great Wharf, located on the Wentlooge Levels, c. 7 km east of Cardiff. The project is the first detailed survey and excavation of a site originally recorded in 1996-7 as part of a larger survey of the intertidal zone from Cardiff to the Second Severn Crossing. The 1997 survey produced important evidence for prehistoric human activity preserved within four palaeochannels. Significant erosion has taken place since then. A new survey of the foreshore has identified additional palaeochannels not seen in 1997 which form part of a more complex system of inter-cutting channels, many containing wood structures including short lines of timbers on the channel edge. Artefacts include a wooden axe handle, antler artefacts, an animal bone assemblage and some pottery of Beaker and Bronze Age date. The finds are thought to derive from a nearby, possibly eroded, settlement. The channels have trapped artefacts and preserved evidence of a range of activities, including what are interpreted as possible boat landings and fishing structures.

Mesolithic to Neolithic and medieval coastal environmental change: intertidal survey at Woolaston, Gloucestershire

At Woolaston on the western shores of the middle Severn Estuary c. 7 km upstream of Chepstow intertidal Holocene sediment exposures have been surveyed and the stratigraphic sequence established by coring and limited excavation. There are two main peats each with a submerged forest. An existing dendrochronological sequence for the Upper Submerged Forest has been extended and the preliminary results of pollen analysis from the peat sequence are summarised. A few flint flakes were found but were not stratified in the mid-Holocene sequence. There is evidence for late Mesolithic / early Neolithic burning episodes which may relate to human activity. Evidence is reported for Medieval activity and the extensive modification of drainage in this period is suggested.

Comparing the thermal performance of horizontal slinky-loop and vertical slinky-loop heat exchangers

The heat pump market in the UK has grown rapidly over the last few years. Performance analyses of vertical ground-loop heat exchanger configurations have been widely carried out using both numerical modelling and experiments. However, research findings and design recommendations on horizontal slinky-loop and vertical slinky-loop heat exchangers are far fewer compared with those for vertical ground-loop heat exchanger configurations, especially where the long-term operation of the systems is concerned. The paper presents the results obtained from a numerical simulation for the horizontal slinky-loop and vertical slinky-loop heat exchangers of a ground-source heat pump system. A three-dimensional numerical heat transfer model was developed to study the thermal performance of various heat exchanger configurations. The influence of the loop pitch (loop spacing) and the depth of a vertical slinky-loop installation were investigated and the thermal performance and excavation work required for the horizontal and vertical slinky-loop heat exchangers were compared. The influence of the installation depth for vertical slinky-loop configurations was also investigated. The results of this study show that the influence of the installation depth of the vertical slinky-loop heat exchanger on the thermal performance of the system is small. The maximum difference in the thermal performance between the vertical and horizontal slinky-loop heat exchangers with the same loop diameter and loop pitch is less than 5%.

Simulation of thermal performance of horizontal slinky-loop heat exchangers for ground source heat pumps

This paper presents results obtained from a numerical simulation for the horizontal slinky-loop heat exchanger of a ground-source heat pump system. A three-dimensional numerical model was developed and the results of the thermal performance of various heat exchanger configurations are presented. The investigation was carried out on five types of loop pitch (loop spacing), three types of loop diameter, three values of soil thermal properties, and allowing continuous and intermittent operation. Comparison was made for the heat transfer rate, the amount of pipe material needed, as well as excavation work required for the horizontal slinky-loop heat exchanger. The results indicate that system parameters have a significant effect on the thermal performance of the system

Analysis of EEG signal to detect motor command generation towards stroke rehabilitation

Our aim is to reconstruct the brain-body loop of stroke patients via an EEG-driven robotic system. After the detection of motor command generation, the robotic arm should assist patient’s movement at the correct moment and in a natural way. In this study we performed EEG measurements from healthy subjects performing discrete spontaneous motion. An EEG analysis based on the temporal correlation of the brain activity was employed to determine the onset of single motion motor command generation.

Life before the minster: the social dynamics of monastic foundation at Anglo-Saxon Lyminge, Kent

Anglo-Saxon monastic archaeology has been constrained by the limited scale of past investigations and their overriding emphasis on core buildings. This paper draws upon the results of an ongoing campaign of archaeological research that is redressing the balance through an ambitious programme of open-area excavation at Lyminge, Kent, the site of a royal double monastery founded in the seventh century ad. The results of five completed fieldwork seasons are assessed and contextualised in a narrative sequence emphasising the dynamic character of Lyminge as an Anglo-Saxon monastic settlement. In so doing, the study brings into sharp focus how early medieval monasteries were emplaced in the landscape, with specific reference to Anglo-Saxon Kent, a regional context offering key insights into how the process of monastic foundation redefined antecedent central places of long-standing politico-religious significance and social action.

Croig Cave: a late Bronze Age ornament deposition and 3,500 years of coastal foraging in NW Mull, Scotland

Activity within caves provides an important element of the later prehistoric and historic settlement pattern of western Scotland. This contribution reports on a small-scale excavation within Croig Cave, on the coast of north-west Mull, that exposed a 1.95m sequence of midden deposits and cave floors that dated bewteen c 1700 BC and AD 1400. Midden analysis indicated the processing of a .... 950 BC, a penannular copper bracelet a discrete ritual episode within the cycle of otherwise potentially mundane activities. Lead isotope analysis indicates an Irish origin for the copper ore. A piece of iron slag within later midden deposits, dated to c 400 BC, along with high frequencies of wood charcoal, suggest that smithing or smelting may have occurred within the cave. High zinc levels in the historic levels of the midden c AD 1200 might indicate intensive processing of seaweed.

Terahertz pulse imaging of stratified architectural materials for cultural heritage studies

Terahertz pulse imaging (TPI) is a novel noncontact, nondestructive technique for the examination of cultural heritage artifacts. It has the advantage of broadband spectral range, time-of-flight depth resolution, and penetration through optically opaque materials. Fiber-coupled, portable, time-domain terahertz systems have enabled this technique to move out of the laboratory and into the field. Much like the rings of a tree, stratified architectural materials give the chronology of their environmental and aesthetic history. This work concentrates on laboratory models of stratified mosaics and fresco paintings, specimens extracted from a neolithic excavation site in Catalhoyuk, Turkey, and specimens measured at the medieval Eglise de Saint Jean-Baptiste in Vif, France. Preparatory spectroscopic studies of various composite materials, including lime, gypsum and clay plasters are presented to enhance the interpretation of results and with the intent to aid future computer simulations of the TPI of stratified architectural material. The breadth of the sample range is a demonstration of the cultural demand and public interest in the life history of buildings. The results are an illustration of the potential role of TPI in providing both a chronological history of buildings and in the visualization of obscured wall paintings and mosaics.

Experimental analysis of the Reynolds flocking model

The classic Reynolds flocking model is formally analysed, with results presented and discussed. Flocking behaviour was investigated through the development of two measurements of flocking, flock area and polarisation, with a view to applying the findings to robotic applications. Experiments varying the flocking simulation parameters individually and simultaneously provide new insight into the control of flock behaviour.

Multi-level planning for semi-autonomous vehicles in traffic scenarios based on separation maximization

The planning of semi-autonomous vehicles in traffic scenarios is a relatively new problem that contributes towards the goal of making road travel by vehicles free of human drivers. An algorithm needs to ensure optimal real time planning of multiple vehicles (moving in either direction along a road), in the presence of a complex obstacle network. Unlike other approaches, here we assume that speed lanes are not present and that different lanes do not need to be maintained for inbound and outbound traffic. Our basic hypothesis is to carry forward the planning task to ensure that a sufficient distance is maintained by each vehicle from all other vehicles, obstacles and road boundaries. We present here a 4-layer planning algorithm that consists of road selection (for selecting the individual roads of traversal to reach the goal), pathway selection (a strategy to avoid and/or overtake obstacles, road diversions and other blockages), pathway distribution (to select the position of a vehicle at every instance of time in a pathway), and trajectory generation (for generating a curve, smooth enough, to allow for the maximum possible speed). Cooperation between vehicles is handled separately at the different levels, the aim being to maximize the separation between vehicles. Simulated results exhibit behaviours of smooth, efficient and safe driving of vehicles in multiple scenarios; along with typical vehicle behaviours including following and overtaking.