A critical evaluation of the ability of the Spinning Enhanced Visible and Infrared Imager (SEVIRI) thermal infrared red-green-blue rendering to identify dust events: theoretical analysis

Using a combination of idealized radiative transfer simulations and a case study from the first field campaign of the Saharan Mineral Dust Experiment (SAMUM) in southern Morocco, this paper provides a systematic assessment of the limitations of the widely used Spinning Enhanced Visible and Infrared Imager (SEVIRI) red-green-blue (RGB) thermal infrared dust product. Both analyses indicate that the ability of the product to identify dust, via its characteristic pink coloring, is strongly dependent on the column water vapor, the lower tropospheric lapse rate, and dust altitude. In particular, when column water vapor exceeds ∼20–25 mm, dust presence, even for visible optical depths of the order 0.8, is effectively masked. Variability in dust optical properties also has a marked impact on the imagery, primarily as a result of variability in dust composition. There is a moderate sensitivity to the satellite viewing geometry, particularly in moist conditions. The underlying surface can act to confound the signal seen through variations in spectral emissivity, which are predominantly manifested in the 8.7μm SEVIRI channel. In addition, if a temperature inversion is present, typical of early morning conditions over the Sahara and Sahel, an increased dust loading can actually reduce the pink coloring of the RGB image compared to pristine conditions. Attempts to match specific SEVIRI observations to simulations using SAMUM measurements are challenging because of high uncertainties in surface skin temperature and emissivity. Recommendations concerning the use and interpretation of the SEVIRI RGB imagery are provided on the basis of these findings.

A route to systematic error in forecasts of Rossby waves

Recent work has shown that both the amplitude of upper-level Rossby waves and the tropopause sharpness decrease with forecast lead time for several days in some operational weather forecast systems. In this contribution, the evolution of error growth in a case study of this forecast error type is diagnosed through analysis of operational forecasts and hindcast simulations. Potential vorticity (PV) on the 320-K isentropic surface is used to diagnose Rossby waves. The Rossby-wave forecast error in the operational ECMWF high-resolution forecast is shown to be associated with errors in the forecast of a warm conveyor belt (WCB) through trajectory analysis and an error metric for WCB outflows. The WCB forecast error is characterised by an overestimation of WCB amplitude, a location of the WCB outflow regions that is too far to the southeast, and a resulting underestimation of the magnitude of the negative PV anomaly in the outflow. Essentially the same forecast error development also occurred in all members of the ECMWF Ensemble Prediction System and the Met Office MOGREPS-15 suggesting that in this case model error made an important contribution to the development of forecast error in addition to initial condition error. Exploiting this forecast error robustness, a comparison was performed between the realised flow evolution, proxied by a sequence of short-range simulations, and a contemporaneous forecast. Both the proxy to the realised flow and the contemporaneous forecast a were produced with the Met Office Unified Model enhanced with tracers of diabatic processes modifying potential temperature and PV. Clear differences were found in the way potential temperature and PV are modified in the WCB between proxy and forecast. These results demonstrate that differences in potential temperature and PV modification in the WCB can be responsible for forecast errors in Rossby waves.

Ball milling as an effective route for the preparation of doped bornite: synthesis, stability and thermoelectric properties

Bornite, Cu5FeS4, is a naturally-occuring mineral with an ultralow thermal conductivity and potential for thermoelectric power generation. We describe here a new, easy and scalable route to synthesise bornite, together with the thermoelectric behaviour of manganese-substituted derivatives, Cu5Fe1-xMnxS4 (0 ≤ x ≤ 0.10). The electrical and thermal transport properties of Cu5Fe1-xMnxS4 (0 ≤ x ≤ 0.10), which are p-type semiconductors, were measured from room temperature to 573 K. The stability of bornite was investigated by thermogravimetric analysis under inert and oxidising atmospheres. Repeated measurements of the electrical transport properties confirm that bornite is stable up to 580 K under an inert atmosphere, while heating to 890 K results in rapid degradation. Ball milling leads to a substantial improvement in the thermoelectric figure of merit of unsusbtituted bornite (ZT = 0.55 at 543 K), when compared to bornite prepared by conventional high-temperature synthesis (ZT < 0.3 at 543 K). Manganese-substituted samples have a ZT comparable to that of unsubstituted bornite.

Carbon nanotubes in electrospun polyethylene oxide nanofibres: a potential route to conducting nanofibres

Polyethylene oxide solution containing multi-walled carbon nanotubes have been electrospun onto a rotating collector to produce highly aligned arrays of electrospun nanofibers ranging in diameters from (200 – 360) nanometres. The addition of a surfactant (Triton X-100)is highly effective in dispersing carbon nanotube within an aqueous solution of polyethylene oxide and the resulting mixture can be electrospun without excessive clumping to produce nanofibers containing high loadings of nanotubes; in this case up to 5% wt thereby providing an effective route to electrically conductive nanofibres.

Bantu expansion shows that habitat alters the route and pace of human dispersals

Unlike most other biological species, humans can use cultural innovations to occupy a range of environments, raising the intriguing question of whether human migrations move relatively independently of habitat or show preferences for familiar ones. The Bantu expansion that swept out of West Central Africa beginning ∼5,000 y ago is one of the most influential cultural events of its kind, eventually spreading over a vast geographical area a new way of life in which farming played an increasingly important role. We use a new dated phylogeny of ∼400 Bantu languages to show that migrating Bantu-speaking populations did not expand from their ancestral homeland in a “random walk” but, rather, followed emerging savannah corridors, with rainforest habitats repeatedly imposing temporal barriers to movement. When populations did move from savannah into rainforest, rates of migration were slowed, delaying the occupation of the rainforest by on average 300 y, compared with similar migratory movements exclusively within savannah or within rainforest by established rainforest populations. Despite unmatched abilities to produce innovations culturally, unfamiliar habitats significantly alter the route and pace of human dispersals.

Designing care bundle documentation to support the recognition and treatment of acute kidney injury: a route to quality improvement

The chapter describes development of care bundle documentation, through an iterative, user-centred design process, to support the recognition and treatment of acute kidney injury (AKI). The chapter details stages of user and stakeholder consultation, employed to develop a design response that was sensitive to user experience and need, culminating in simulation testing of a near final prototype. The development of supplementary awareness-raising materials, relating to the main care bundle tool is also discussed. This information design response to a complex clinical decision-making process is contrasted to other approaches to promoting AKI care. The need for different but related approaches to the working tool itself and the tool’s communication are discussed. More general recommendations are made for the development of communication tools to support complex clinical processes.

Biodiversity and green open space

Biodiversity has been defined as the totality of genes, species, and ecosystems that inhabit the earth with the field contributing to many aspects of our lives and livelihoods by providing us with food, drink, medicines and shelter, as well as contributing to improving our surrounding environment. Benefits include providing life services through improved horticultural production, improving the business and service of horticulture as well as our environment, as well as improving our health and wellbeing, and our social and cultural relationships. Threats to biodiversity can include fragmentation, degradation and deforestation of habitat, introduction of invasive and exotic species, climate change and extreme weather events, over-exploitation of our natural resources, hybridisation, genetic pollution/erosion and food security issues and human overpopulation. This chapter examines a series of examples that provide the dual aims of biodiversity conservation and horticultural production and service; namely organic horticultural cropping, turf management, and nature-based tourism, and ways of valuing biological biodiversity such as the payment of environmental services and bio-prospecting. Horticulture plays a major role in the preserving of biodiversity.

The evolution of green leases: towards inter-organizational environmental governance

Improving the environmental performance of non-domestic buildings is a complex and ‘wicked’ problem due to conflicting interests and incentives. This is particularly challenging in tenanted spaces, where landlord and tenant interactions are regulated through leases that traditionally ignore environmental considerations. ‘Green leasing’ is conceptualized as a form of ‘middle-out’ inter-organizational environmental governance that operates between organizations, alongside other drivers. This paper investigates how leases are evolving to become ‘greener’ in the UK and Australia, providing evidence from five varied sources on: (1) UK office and retail leases, (2) UK retail sector energy management, (3) a major UK retailer case study; (4) office leasing in Sydney, and (5) expert interviews on Australian retail leases. With some exceptions, the evidence reveals an increasing trend towards green leases in prime offices in both countries, but not in retail or sub-prime offices. Generally introduced by landlords, adopted green leases contain a variety of ambitions and levels of enforcement. As an evolving form of private–private environmental governance, green leases form a valuable framework for further tenant–landlord cooperation within properties and across portfolios. This increased cohesion could create new opportunities for polycentric governance, particularly at the interface of cities and the property industry.

Energy savings in buildings or UHI mitigation? Comparison between green roofs and cool roofs

The intensification of the Urban Heat Island effect (UHI) is a problem that involves several fields, and new adequate solutions are required to mitigate its amplitude. The construction sector is strictly related with this phenomenon; in particular, roofs are the envelope components subject to the highest solar irradiance, hence any mitigation strategy should start from them and involve their appropriate design process. For this purpose, cool materials, i.e. materials which are able to reflect a large amount of solar radiation and avoid overheating of building surfaces have been deeply analyzed in the last years both at building and urban scales, showing their benefits especially in hot climates. However, green roofs also represent a possible way to cope with UHI, even if their design is not straightforward and requires taking into account many variables, strictly related with the local climatic conditions. In this context, the present paper proposes a comparison between cool roofs and green roofs for several Italian cities that are representative of different climatic conditions. In search of the most effective solution, the answers may be different depending on the perspective that leads the comparison, i.e. the need to reduce the energy consumption in buildings or the desire to minimize the contribution of the UHI effect.

Determinants of green building adoption

In this paper we investigate variations in the adoption of LEED-certified commercial buildings across 174 core-based statistical areas in the United States. Drawing upon a unique database and using a robust analytical framework, the determinants of the proportion LEED-certified space are modeled. We find that, despite high growth rates, LEED-certified stock accounts for a relatively small proportion of the total commercial stock. The average proportion is less than 1%. A further contribution of the paper is that our concentration measure avoids the biases associated with simple percentage measures that were used in previous studies of this topic. Strongest predictors of the proportion of LEED-certified commercial space in a local market are market size, educational attainment and economic growth. In terms of policy effectiveness, it is found that only a mandatory requirement to obtain LEED certification for new buildings has a significant positive effect on market penetration.

How do green roofs mitigate urban thermal stress under heat waves?

As the climate warms, heat waves (HW) are projected to be more intense and to last longer, with serious implications for public health. Urban residents face higher health risks because urban heat islands (UHIs) exacerbate HW conditions. One strategy to mitigate negative impacts of urban thermal stress is the installation of green roofs (GRs) given their evaporative cooling effect. However, the effectiveness of GRs and the mechanisms by which they have an effect at the scale of entire cities are still largely unknown. The Greater Beijing Region (GBR) is modeled for a HW scenario with the Weather Research and Forecasting (WRF) model coupled with a state-of-the-art urban canopy model (PUCM) to examine the effectiveness of GRs. The results suggest GR would decrease near-surface air temperature (ΔT2max = 2.5 K) and wind speed (ΔUV10max = 1.0 m s-1) but increase atmospheric humidity (ΔQ2max = 1.3 g kg-1). GRs are simulated to lessen the overall thermal stress as indicated by apparent temperature (ΔAT2max = 1.7 °C). The modifications by GRs scale almost linearly with the fraction of the surface they cover. Investigation of the surface-atmosphere interactions indicate that GRs with plentiful soil moisture dissipate more of the surface energy as latent heat flux and subsequently inhibit the development of the daytime planetary boundary layer (PBL). This causes the atmospheric heating through entrainment at the PBL top to be decreased. Additionally, urban GRs modify regional circulation regimes leading to decreased advective heating under HW.

The Route of the English Ambassador: Valladolid, 1605

Hand-held map of the entry into the city of Valladolid by the English Ambassador and his embassy to the court of Philip III of Spain in May 1605.