Actors and objects: A socio-technical networks approach for construction management research

We explore the contribution of socio-technical networks approaches to construction management research. These approaches are distinctive for their analysis of actors and objects as mutually constituted within socio-technical networks. They raise questions about the ways in which the content, meaning and use of technology is negotiated in practice, how particular technical configurations are elaborated in response to specific problems and why certain paths or solutions are adopted rather than others. We illustrate this general approach with three case studies: a historical study of the development of reinforced concrete in France, the UK and the US, the recent introduction of 3D-CAD software into four firms and an analysis of the uptake of environmental assessment technologies in the UK since 1990. In each we draw out the ways in which various technologies shaped and were shaped by different socio-technical networks. We conclude with a reflection on the contributions of socio-technical network analysis for more general issues including the study of innovation and analyses of context and power.

Codification vs personalisation: A study of the information evaluation practice between aerospace and construction industries

In the emerging digital economy, the management of information in aerospace and construction organisations is facing a particular challenge due to the ever-increasing volume of information and the extensive use of information and communication technologies (ICTs). This paper addresses the problems of information overload and the value of information in both industries by providing some cross-disciplinary insights. In particular it identifies major issues and challenges in the current information evaluation practice in these two industries. Interviews were conducted to get a spectrum of industrial perspectives (director/strategic, project management and ICT/document management) on these issues in particular to information storage and retrieval strategies and the contrasting approaches to knowledge and information management of personalisation and codification. Industry feedback was collected by a follow-up workshop to strengthen the findings of the research. An information-handling agenda is outlined for the development of a future Information Evaluation Methodology (IEM) which could facilitate the practice of the codification of high-value information in order to support through-life knowledge and information management (K&IM) practice.

Final report on research project PS2010, proof of concept of automated mapping of weeds in arable fields

Many weeds occur in patches but farmers frequently spray whole fields to control the weeds in these patches. Given a geo-referenced weed map, technology exists to confine spraying to these patches. Adoption of patch spraying by arable farmers has, however, been negligible partly due to the difficulty of constructing weed maps. Building on previous DEFRA and HGCA projects, this proposal aims to develop and evaluate a machine vision system to automate the weed mapping process. The project thereby addresses the principal technical stumbling block to widespread adoption of site specific weed management (SSWM). The accuracy of weed identification by machine vision based on a single field survey may be inadequate to create herbicide application maps. We therefore propose to test the hypothesis that sufficiently accurate weed maps can be constructed by integrating information from geo-referenced images captured automatically at different times of the year during normal field activities. Accuracy of identification will also be increased by utilising a priori knowledge of weeds present in fields. To prove this concept, images will be captured from arable fields on two farms and processed offline to identify and map the weeds, focussing especially on black-grass, wild oats, barren brome, couch grass and cleavers. As advocated by Lutman et al. (2002), the approach uncouples the weed mapping and treatment processes and builds on the observation that patches of these weeds are quite stable in arable fields. There are three main aspects to the project. 1) Machine vision hardware. Hardware component parts of the system are one or more cameras connected to a single board computer (Concurrent Solutions LLC) and interfaced with an accurate Global Positioning System (GPS) supplied by Patchwork Technology. The camera(s) will take separate measurements for each of the three primary colours of visible light (red, green and blue) in each pixel. The basic proof of concept can be achieved in principle using a single camera system, but in practice systems with more than one camera may need to be installed so that larger fractions of each field can be photographed. Hardware will be reviewed regularly during the project in response to feedback from other work packages and updated as required. 2) Image capture and weed identification software. The machine vision system will be attached to toolbars of farm machinery so that images can be collected during different field operations. Images will be captured at different ground speeds, in different directions and at different crop growth stages as well as in different crop backgrounds. Having captured geo-referenced images in the field, image analysis software will be developed to identify weed species by Murray State and Reading Universities with advice from The Arable Group. A wide range of pattern recognition and in particular Bayesian Networks will be used to advance the state of the art in machine vision-based weed identification and mapping. Weed identification algorithms used by others are inadequate for this project as we intend to collect and correlate images collected at different growth stages. Plants grown for this purpose by Herbiseed will be used in the first instance. In addition, our image capture and analysis system will include plant characteristics such as leaf shape, size, vein structure, colour and textural pattern, some of which are not detectable by other machine vision systems or are omitted by their algorithms. Using such a list of features observable using our machine vision system, we will determine those that can be used to distinguish weed species of interest. 3) Weed mapping. Geo-referenced maps of weeds in arable fields (Reading University and Syngenta) will be produced with advice from The Arable Group and Patchwork Technology. Natural infestations will be mapped in the fields but we will also introduce specimen plants in pots to facilitate more rigorous system evaluation and testing. Manual weed maps of the same fields will be generated by Reading University, Syngenta and Peter Lutman so that the accuracy of automated mapping can be assessed. The principal hypothesis and concept to be tested is that by combining maps from several surveys, a weed map with acceptable accuracy for endusers can be produced. If the concept is proved and can be commercialised, systems could be retrofitted at low cost onto existing farm machinery. The outputs of the weed mapping software would then link with the precision farming options already built into many commercial sprayers, allowing their use for targeted, site-specific herbicide applications. Immediate economic benefits would, therefore, arise directly from reducing herbicide costs. SSWM will also reduce the overall pesticide load on the crop and so may reduce pesticide residues in food and drinking water, and reduce adverse impacts of pesticides on non-target species and beneficials. Farmers may even choose to leave unsprayed some non-injurious, environmentally-beneficial, low density weed infestations. These benefits fit very well with the anticipated legislation emerging in the new EU Thematic Strategy for Pesticides which will encourage more targeted use of pesticides and greater uptake of Integrated Crop (Pest) Management approaches, and also with the requirements of the Water Framework Directive to reduce levels of pesticides in water bodies. The greater precision of weed management offered by SSWM is therefore a key element in preparing arable farming systems for the future, where policy makers and consumers want to minimise pesticide use and the carbon footprint of farming while maintaining food production and security. The mapping technology could also be used on organic farms to identify areas of fields needing mechanical weed control thereby reducing both carbon footprints and also damage to crops by, for example, spring tines. Objective i. To develop a prototype machine vision system for automated image capture during agricultural field operations; ii. To prove the concept that images captured by the machine vision system over a series of field operations can be processed to identify and geo-reference specific weeds in the field; iii. To generate weed maps from the geo-referenced, weed plants/patches identified in objective (ii).

Moving feedback forward: theory to practice

There is substantial research interest in tutor feedback and students’ perception and use of such feedback. This paper considers some of the major issues raised in relation to tutor feedback and student learning. We explore some of the current feedback drivers, most notably the need for feedback to move away from simply a monologue from a tutor to a student to a valuable tutor–student dialogue. In relation to moving feedback forward the notions of self regulation, dialogue and social learning are explored and then considered in relation to how such theory can translate into practice. The paper proposes a framework (GOALS) as a tool through which tutors can move theory into practice with the aim of improving student learning from feedback.

English teachers in the digital age – a case study of policy and expert practice from England

This article is a case study of how English teachers in England have coped with the paradigm shift from print to digital literacy. It reviews a large scale national initiative that was intended to upskill all teachers, considers its weak impact and explores the author’s involvement in the evaluation of the project’s direct value to English teachers. It explores how this latter evaluation revealed how best practice in English using ICT was developing in a variable manner. It then reports on a recent small scale research project that investigated how very good teachers have adapted ICT successfully into their teaching. It focuses on how the English teachers studied in the project are developing a powerful new pedagogy situated in the life worlds of their students and suggests that this model may be of benefit to many teachers. The issues this article reports on have resonance in all English speaking countries. This article is also a personal story of the author’s close involvement with ICT and English over 20 years, and provides evidence for his conviction that digital technologies will eventually transform English teaching.

Re-thinking stakeholder management in construction: theory & research

From its roots in strategic management theory, stakeholder management has been adopted by the construction management academic community and applied as a valid paradigm around which research work has been generated aiming to improve project effi ciencies and effectiveness. However, academics have argued that stakeholder management should move away from purely theoretical discussions and engage more with the realities of construction project work. This paper re-appraises the stakeholder management concept for the construction domain by re-thinking some of the fundamental principles and ideals present within the more general stakeholder theory literature. It engages with issues which researchers have arguably failed to acknowledge and calls for a re-evaluation of construction stakeholder management research by presenting a review around four distinctive themes: the moral obligations of engaging with stakeholders against the business and efficiency driven imperatives of construction organisations; the contrast between theoretical abstractions and empirically grounded research; the tensions between theoretical convergence versus calls for multiple and divergent perspectives on stakeholder management and the practicalities of conducting stakeholder management in the construction domain. Such a critical re-appraisal of stakeholder management thinking both generates new lines of enquiry and promises to help inform and shape current and future industry practice.

The first five years of the EU Impact Assessment system: a risk economics perspective on gaps between rationale and practice

In 2003 the European Commission started using Impact Assessment (IA) as the main empirical basis for its major policy proposals. The aim was to systematically assess ex ante the economic, social and environmental impacts of EU policy proposals. In parallel, research proliferated in search for theoretical grounds for IAs and in an attempt to evaluate empirically the performance of the first sets of IAs produced by the European Commission. This paper combines conceptual and evaluative studies carried out in the first five years of EU IAs. It concludes that the great discrepancy between rationale and practice calls for a different theoretical focus and a higher emphasis on evaluating empirically crucial risk economics aspects of IAs, such as the value of statistical life, price of carbon, the integration of macroeconomic modelling and scenario analysis.

Investigating the prevalence and causes of prescribing errors in general practice: the PRACtICe Study

Aim: To determine the prevalence and nature of prescribing errors in general practice; to explore the causes, and to identify defences against error. Methods: 1) Systematic reviews; 2) Retrospective review of unique medication items prescribed over a 12 month period to a 2% sample of patients from 15 general practices in England; 3) Interviews with 34 prescribers regarding 70 potential errors; 15 root cause analyses, and six focus groups involving 46 primary health care team members Results: The study involved examination of 6,048 unique prescription items for 1,777 patients. Prescribing or monitoring errors were detected for one in eight patients, involving around one in 20 of all prescription items. The vast majority of the errors were of mild to moderate severity, with one in 550 items being associated with a severe error. The following factors were associated with increased risk of prescribing or monitoring errors: male gender, age less than 15 years or greater than 64 years, number of unique medication items prescribed, and being prescribed preparations in the following therapeutic areas: cardiovascular, infections, malignant disease and immunosuppression, musculoskeletal, eye, ENT and skin. Prescribing or monitoring errors were not associated with the grade of GP or whether prescriptions were issued as acute or repeat items. A wide range of underlying causes of error were identified relating to the prescriber, patient, the team, the working environment, the task, the computer system and the primary/secondary care interface. Many defences against error were also identified, including strategies employed by individual prescribers and primary care teams, and making best use of health information technology. Conclusion: Prescribing errors in general practices are common, although severe errors are unusual. Many factors increase the risk of error. Strategies for reducing the prevalence of error should focus on GP training, continuing professional development for GPs, clinical governance, effective use of clinical computer systems, and improving safety systems within general practices and at the interface with secondary care.

Commercial property loan valuations in the UK : the changing landscape of practice and liability

This paper is the first of two which aim to examine the major legal liability implications of changes to the commercial property loan valuation process caused by the recession in the UK property market and to make recommendations to valuers and their professional institutions to improve the quality of the process and the result. This paper identifies the market background to commercial property lending and discusses the implications of the falls in value for lenders and valuers. These include two major strands; first, the outcome of discussions between the representative bodies of these two groups and, second, the increasing litigation caused by lenders suing valuers for professional negligence. The discussions between representative groups have driven a debate on the valuation process leading to a number of reports and guidance notes. This paper discusses the outcomes paying particular attention to the basis of valuation for loan purposes and the provision of additional information in valuation reports. This paper also reviews the legal framework which influences the relationship between the lenders and valuers and discusses the duty of care. The role of instructions in the valuation process, the significance of the identity of the person to be advised and the possibility of a conflict of interest arising are all considered. The paper also addresses the issue of the standards required of a commercial loan valuer, including how this is interpreted by the courts and the legal status of professional guidance notes. The paper concludes by identifying potential areas for dispute within the loan valuation process and raising a number of research questions concerning the operation of this process which are addressed in a following paper.

Commercial property loan valuations in the UK : implications of current trends in practice and liability

This paper is the second of two papers which aim to examine the major legal liability implications of changes to the commercial property loan valuation process caused by the recession in the UK property market and to make recommendations to valuers and their professional institutions to improve the quality of the process and the result. The objectives of this paper are to address a number of the practical implications of changes to the loan valuation process within the context of legal liability. The results of an interview survey of lenders and valuers are reported and analysed. The survey examined the loan valuation process including the selection and instruction of valuers, bases of valuation and valuation reporting. In the selection and instruction process, the findings of the survey reveal two potential problems within the valuer/lender relationship. First, valuers still occasionally accept instructions from borrowers and this could lead to a conflict of interest as lenders may rely on the survey. Second, the occasional lack of formal instructions prior to the delivery of reports casts doubt on the valuer’s ability to correctly identify the needs of clients. Regarding the basis of valuation, it was found that valuers are providing valuations on bases which they do not think are appropriate. Valuers may be legally liable if they do not inform clients of their reservations and this situation must be urgently addressed. The survey also confirms previous research that valuation reports are considered to be light on contextual information concerning markets. The paper concludes by making a number of specific recommendations concerning possible improvements to the commercial property loan valuation process.

Protecting developing countries' forests: enforcement in theory and practice

This paper relates the key findings of the optimal economic enforcement literature to practical issues of enforcing forest and wildlife management access restrictions in developing countries. Our experiences, particularly from Tanzania and eastern India, provide detail of the key pragmatic issues facing those responsible for protecting natural resources. We identify large gaps in the theoretical literature that limit its ability to inform practical management, including issues of limited funding and cost recovery, multiple tiers of enforcement and the incentives facing enforcement officers, and conflict between protected area managers and rural people's needs.