The evaluation of CloudSat and CALIPSO ice microphysical products using ground-based cloud radar and lidar observations

In this paper, the statistical properties of tropical ice clouds (ice water content, visible extinction, effective radius, and total number concentration) derived from 3 yr of ground-based radar–lidar retrievals from the U.S. Department of Energy Atmospheric Radiation Measurement Climate Research Facility in Darwin, Australia, are compared with the same properties derived using the official CloudSat microphysical retrieval methods and from a simpler statistical method using radar reflectivity and air temperature. It is shown that the two official CloudSat microphysical products (2B-CWC-RO and 2B-CWC-RVOD) are statistically virtually identical. The comparison with the ground-based radar–lidar retrievals shows that all satellite methods produce ice water contents and extinctions in a much narrower range than the ground-based method and overestimate the mean vertical profiles of microphysical parameters below 10-km height by over a factor of 2. Better agreements are obtained above 10-km height. Ways to improve these estimates are suggested in this study. Effective radii retrievals from the standard CloudSat algorithms are characterized by a large positive bias of 8–12 μm. A sensitivity test shows that in response to such a bias the cloud longwave forcing is increased from 44.6 to 46.9 W m−2 (implying an error of about 5%), whereas the negative cloud shortwave forcing is increased from −81.6 to −82.8 W m−2. Further analysis reveals that these modest effects (although not insignificant) can be much larger for optically thick clouds. The statistical method using CloudSat reflectivities and air temperature was found to produce inaccurate mean vertical profiles and probability distribution functions of effective radius. This study also shows that the retrieval of the total number concentration needs to be improved in the official CloudSat microphysical methods prior to a quantitative use for the characterization of tropical ice clouds. Finally, the statistical relationship used to produce ice water content from extinction and air temperature obtained by the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) satellite is evaluated for tropical ice clouds. It is suggested that the CALIPSO ice water content retrieval is robust for tropical ice clouds, but that the temperature dependence of the statistical relationship used should be slightly refined to better reproduce the radar–lidar retrievals.

Organic food: what we know (and do not know) about consumers

This paper reports on the latest contributions to over 20 years of research on organic food consumers. There is a general consensus in the literature on the reasons why people buy organic food. However, there is also a gap between consumers’ generally positive attitude toward organic food and their relatively low level of actual purchases. Product differentiation based on intangible features, such as credence attributes such as organic, in fast-moving consumer goods categories is enjoying rapid growth. However, there are many difficulties with research in this area, including the errors inherent in research that relies on consumer self-reporting methodologies. Further, in relation to organic food, there is a divergence between consumers’ perception of its superior health features and scientific evidence. Fresh fruits and vegetables are of vital importance to the organic sector as they are the entry point for many customers and account for one-third of sales. Further, although there is a small proportion of dedicated organic food buyers, most sales come from the majority of buyers who switch between conventional and organic food purchases. This paper identifies the practical implications for generic organic food marketing campaigns, as well as for increasing sales of specific products. It concludes with suggested priorities for further research.

A novel method for assessing risks to pollinators from plant protection products using honeybees as a model species

Pollination is one of the most important ecosystem services in agroecosystems and supports food production. Pollinators are potentially at risk being exposed to pesticides and the main route of exposure is direct contact, in some cases ingestion, of contaminated materials such as pollen, nectar, flowers and foliage. To date there are no suitable methods for predicting pesticide exposure for pollinators, therefore official procedures to assess pesticide risk are based on a Hazard Quotient. Here we develop a procedure to assess exposure and risk for pollinators based on the foraging behaviour of honeybees (Apis mellifera) and using this species as indicator representative of pollinating insects. The method was applied in 13 European field sites with different climatic, landscape and land use characteristics. The level of risk during the crop growing season was evaluated as a function of the active ingredients used and application regime. Risk levels were primarily determined by the agronomic practices employed (i.e. crop type, pest control method, pesticide use), and there was a clear temporal partitioning of risks through time. Generally the risk was higher in sites cultivated with permanent crops, such as vineyard and olive, than in annual crops, such as cereals and oil seed rape. The greatest level of risk is generally found at the beginning of the growing season for annual crops and later in June–July for permanent crops.

An eye for an eye: robust motion segmentation by applying the latest in human vision research

Automatically extracting interesting objects from videos is a very challenging task and is applicable to many research areas such robotics, medical imaging, content based indexing and visual surveillance. Automated visual surveillance is a major research area in computational vision and a commonly applied technique in an attempt to extract objects of interest is that of motion segmentation. Motion segmentation relies on the temporal changes that occur in video sequences to detect objects, but as a technique it presents many challenges that researchers have yet to surmount. Changes in real-time video sequences not only include interesting objects, environmental conditions such as wind, cloud cover, rain and snow may be present, in addition to rapid lighting changes, poor footage quality, moving shadows and reflections. The list provides only a sample of the challenges present. This thesis explores the use of motion segmentation as part of a computational vision system and provides solutions for a practical, generic approach with robust performance, using current neuro-biological, physiological and psychological research in primate vision as inspiration.

Effect of dextransucrase cellobiose acceptor products on the growth of human gut bacteria

The selective fermentation by human gut bacteria of gluco-oligosaccharides obtained from the reaction between the glucosyl group of sucrose and cellobiose, catalyzed by dextransucrases (DSR) from Leuconostoc mesenteroides, has been evaluated. Oligosaccharides were fractionated according to their molecular weight, and their effect on the growth of different bacterial groups was studied. To determine the structure (position and configuration of glycosidic linkages)�function relationship, their properties were compared to those of DSR maltose acceptor products (DSRMal) and of recognized prebiotic carbohydrates (fructo-oligosaccharides, FOS). Cellobiose acceptor products (DSRCel) showed bifidogenic properties similar to those of FOS. However, no significant differences related to molecular weight or isomeric configurations were found for DSRCel and DSRMal products.

Blood pressure lowering effects of beetroot juice and novel beetroot enriched bread products in normotensive male subjects

A number of vegetables have a high nitrate content which after ingestion can be reduced to 36 nitrite by oral bacteria, and further to vasoprotective nitric oxide endogenously. Two separate 37 randomly controlled, single blind, cross-over, postprandial studies were performed in 38 normotensive volunteers. Ambulatory blood pressure was measured over a 24 h period 39 following consumption of either four doses of beetroot juice (BJ) 0 g, 100 g, 250 g and 500 g 40 (n = 18) or three bread products, control bread (0 g beetroot), red beetroot and white beetroot 41 enriched breads (n =14). Total urinary nitrate/nitrite (NOx) was measured at baseline, 2, 4 42 and 24 h post ingestion. BJ consumption significantly, and in a near dose dependent manner, 43 lowered systolic (P <0.01) and diastolic BP (P <0.001) over a period of 24 h, compared to 44 water control. Furthermore, bread products enriched with 100 g red or white beetroot lowered 45 systolic and diastolic BP over a period of 24 h (red beetroot enriched bread, P <0.05), with no 46 statistical differences between varieties. Total urinary NOx significantly increased following 47 consumption of 100 g (P<0.01), 250 g (P <0.001) and 500 g BJ (P <0.001) and after red 48 beetroot bread (P <0.05), but did not reach significance for white beetroot bread compared to 49 the no beetroot condition. These studies demonstrated significant hypotensive effects of a low 50 dose (100 g) of beetroot which was unaffected by processing, or the presence of betacyanins. 51 This data strengthens the evidence for cardioprotective BP lowering effects of dietary nitrate-52 rich vegetables.

Antecedents of attitude and intention towards counterfeit symbolic and experiential products

This paper investigates the impact of price consciousness, perceived risk, and ethical obligation on attitude and intention towards counterfeit products. Data were collected from a sample of 200 respondents via an online questionnaire. A conceptual model was derived and tested via structural equation modelling in the contexts of symbolic and experiential counterfeit products. Findings show differences in the factors (and weight thereof) impacting attitude and purchase intention in the two product contexts. Specifically, ethical obligation and perceived risk are found to be significant predictors of attitude towards both symbolic and counterfeit products, while price consciousness is found to predict only attitude towards experiential products, but not purchase intention in either counterfeit product context.

Consumer robotic products: studying the factors that influence market adoption

The aim of this article is to identify the key factors that are associated with the adoption of a commercial robot in the home. This article is based on the development of the robot product Cybot by the University of Reading in conjunction with a publisher (Eaglemoss International Ltd.). The robots were distributed through a new part-work magazine series (Ultimate Real Robots) that had long-term customer usage and retention. A part-work is a serial publication that is issued periodically (e.g., every two weeks), usually in magazine format, and builds into a complete collection. This magazine focused on robotics and was accompanied by cover-mounted component parts that could be assembled, with instructions, by the user to build a working robot over the series. In total, the product contributed over half a million operational domestic robots to the world market, selling over 20 million robot part-work magazines across 18 countries, thereby providing a unique breadth of insight. Gaining a better understanding of the overall attitudes that customers of this product had toward robots in the home, their perception of what such devices could deliver and how they would wish to interact with them should provide results applicable to the domestic appliance, assistance/care, entertainment, and educational markets.

Europe’s biocidal products directive: benefits and costs in urban pest management

The European Commission’s Biocidal Products Directive (Council Directive 98/8 EC), known as the BPD, is the largest regulatory exercise ever to affect the urban pest control industry. Although focussed in the European Union its impact is global because any company selling pest control products in the EU must follow its principles. All active substances, belonging to 23 different biocidal product types, come within the Directive’s scope of regulatory control. This will eventually involve re-registration of all existing products, as well as affecting any new product that comes to the market. Some active substances, such as the rodenticides and insecticides, are already highly regulated in Europe but others, such as embalming fluids, masonry preservatives, disinfectants and repellents/attractants will come under intensive regulatory scrutiny for the first time. One of the purposes of the Directive is to offer enhanced protection for human health and the environment. The potential benefit for suppliers of pest control products is mutual recognition of regulatory product dossiers across 25 Member States of the European Union. This process, requiring harmonisation of all regulatory decision-making processes, should reduce duplicated effort and, potentially, allow manufacturers speedier access to European markets. However, the cost to industry is enormous, both in terms of the regulatory resources required to assemble BPD dossiers and the development budgets required to conduct studies to meet its new standards. The cost to regulatory authorities is also tremendous, in terms of the need to upgrade staff capabilities to meet new challenges and the volume of the work expected by the Commission when they are appointed the Rapporteur Member State (RMS) for an active substance. Users of pest control products will pay a price too. The increased regulatory costs of maintaining products in the European market are likely to be passed on, at least in part, to users. Furthermore, where the costs of meeting new regulatory requirements cannot be recouped from product sales, many well-known products may leave the market. For example, it seems that in future few rodenticides that are not anticoagulants will be available within the EU. An understanding of the BPD is essential to those who intend to place urban pest control products on the European market and may be useful to those considering the harmonisation of regulatory processes elsewhere. This paper reviews the operation of the first stages of the BPD for rodenticides, examines the potential benefits and costs of the legislation to the urban pest control industry and looks forward to the next stages of implementation involving all insecticides used in urban pest management.

Gut microbial catabolism of grape seed flavan-3-ols by human faecal microbiota. Targetted analysis of precursor compounds, intermediate metabolites and end-products.

In vitro batch culture fermentations were conducted with grape seed polyphenols and human faecal microbiota, in order to monitor both changes in precursor flavan-3-ols and the formation of microbial-derived metabolites. By the application of UPLC-DAD-ESI-TQ MS, monomers, and dimeric and trimeric procyanidins were shown to be degraded during the first 10 h of fermentation, with notable inter-individual differences being observed between fermentations. This period (10 h) also coincided with the maximum formation of intermediate metabolites, such as 5-(3′,4′-dihydroxyphenyl)-γ-valerolactone and 4-hydroxy-5-(3′,4′-dihydroxyphenyl)-valeric acid, and of several phenolic acids, including 3-(3,4-dihydroxyphenyl)-propionic acid, 3,4-dihydroxyphenylacetic acid, 4-hydroxymandelic acid, and gallic acid (5–10 h maximum formation). Later phases of the incubations (10–48 h) were characterised by the appearance of mono- and non-hydroxylated forms of previous metabolites by dehydroxylation reactions. Of particular interest was the detection of γ-valerolactone, which was seen for the first time as a metabolite from the microbial catabolism of flavan-3-ols. Changes registered during fermentation were finally summarised by a principal component analysis (PCA). Results revealed that 5-(3′,4′-dihydroxyphenyl)-γ-valerolactone was a key metabolite in explaining inter-individual differences and delineating the rate and extent of the microbial catabolism of flavan-3-ols, which could finally affect absorption and bioactivity of these compounds.

The impact of substituting SFA in dairy products with MUFA or PUFA on CVD risk: evidence from human intervention studies

With the substantial economic and social burden of CVD, the need to modify diet and lifestyle factors to reduce risk has become increasingly important. Milk and dairy products, being one of the main contributors to SFA intake in the UK, are a potential target for dietary SFA reduction. Supplementation of the dairy cow's diet with a source of MUFA or PUFA may have beneficial effects on consumers' CVD risk by partially replacing milk SFA, thus reducing entry of SFA into the food chain. A total of nine chronic human intervention studies have used dairy products, modified through bovine feeding, to establish their effect on CVD risk markers. Of these studies, the majority utilised modified butter as their primary test product and used changes in blood cholesterol concentrations as their main risk marker. Of the eight studies that measured blood cholesterol, four reported a significant reduction in total and LDL-cholesterol (LDL-C) following chronic consumption of modified milk and dairy products. Data from one study suggested that a significant reduction in LDL-C could be achieved in both the healthy and hypercholesterolaemic population. Thus, evidence from these studies suggests that consumption of milk and dairy products with modified fatty acid composition, compared with milk and dairy products of typical milk fat composition, may be beneficial to CVD risk in healthy and hypercholesterolaemic individuals. However, current evidence is insufficient and further work is needed to investigate the complex role of milk and cheese in CVD risk and explore the use of novel markers of CVD risk.

On the universal TRO of a JC*-triple, ideals and tensor products

In a development from material introduced in recent work, we discuss the interconnections between ternary rings of operators (TROs) and right C*-algebras generated by JC*-triples, deducing that every JC*-triple possesses a largest universally reversible ideal, that the universal TRO commutes with appropriate tensor products and establishing a reversibility criterion for type I JW*-triples.