Efficient masking of corrosion and fission products such as Ni(II) and Pd(II) in the presence of the minor actinide Am(III) using hydrophilic anionic or cationic bis-triazines

Water soluble anionic and cationic bis-triazine ligands are able to suppress (mask) the extraction of corrosion and fission products such as Ni(II) and Pd(II) that are found in PUREX raffinates. Thus it is possible to separate these elements from the minor actinide Am(III). Although some masking agents have previously been developed that retard the extraction of Pd(II), this is the first time a masking agent has been developed for Ni(II).

Use of TD-GC-TOF-MS to assess volatile composition during post harvest storage in seven accessions of rocket salad (Eruca sativa)

An important step in breeding for nutritionally enhanced varieties is determining the effects of the post-harvest supply chain on phytochemicals and the changes in VOCs produced over time. TD- GC-TOF-MS was used and a technique for the extraction of VOCs from the headspace using portable tubes is described. Forty-two compounds were detected; 39 were identified by comparison to NIST libraries. Thirty-five compounds had not been previously reported in Eruca sativa. Seven accessions were assessed for changes in headspace VOCs over 7 days. Relative amounts of VOCs across 3 time points were significantly different - isothiocyanate-containing molecules being abundant on 'Day 0'. Each accession showed differences in proportions/types of volatiles produced on each day. PCA revealed a separation of VOC profiles according to the day of sampling. Changes in VOC profiles over time could provide a tool for assessment of shelf-life.

Manipulation of lipids in animal-derived foods: can it contribute to public health nutrition?

Foods derived from animals are an important source of nutrients for humans. Concerns have been raised that due to their SFA content, dairy foods may increase the risk of cardiometabolic disease. Prospective studies do not indicate an association between milk consumption and increased disease risk although there are less data for other dairy foods. SFA in dairy products can be partially replaced by cis-MUFA through nutrition of the dairy cow although there are too few human studies to conclude that such modification leads to reduced chronic disease risk. Intakes of LCn-3 FA are sub-optimal in many countries and while foods such as poultry meat can be enriched by inclusion of fish oil in the diet of the birds, fish oil is expensive and has an associated risk that the meat will be oxidatively unstable. Novel sources of LCn-3 FA such as kirll oil, algae, and genetically modified plants may prove to be better candidates for meat enrichment. The value of FA-modified foods cannot be judged by their FA composition alone and there needs to be detailed human intervention studies carried out before judgements concerning improved health value can be made. Practical applications: The amount and FA composition of dietary lipids are known to contribute to the risk of chronic disease in humans which is increasing and becoming very costly to treat. The use of animal nutrition to improve the FA composition of staple foods such as dairy products and poultry meat has considerable potential to reduce chronic risk at population level although judgements must not be based simply on FA composition of the foods.

Potent anthelmintic activity of galloylated proanthocyanidins from shea meal (Vitellaria paradoxa)

Proanthocyanindins (PAs) from shea meal (SM), a by-product obtained after lipid extraction of the nuts, contained B-type linkages, had a high ratio of prodelphinidins (73%) and were galloylated (42%). The average polymer size was 8 flavan-3-ol subunits (≈2384 Daltons) and epigallocatechin gallate was the major subunit. Purified PA fractions from SM were tested in vitro for anthelmintic properties against gastrointestinal nematodes from ruminants (H. contortus and T. colubriformis) [1] by the larval exsheathment inhibition assay and from pigs (A. suum) by the larval migration inhibition assay. Results showed that PAs from SM have a potent anthelmintic activity against those parasites similar to white clover (Trifolium repens) flowers (WCF) [1, 2] (EC50 µg/mL; SM: 55.1, 16.5, 75.9; WCF: 37.4, 14.5, 110.1 for A. suum, H. contortus and T. colubriformis respectively). WCF PAs are constituted almost exclusively of prodelphinidin (PD) compared to SM (98% vs. 73%) but do not contained galloylated PAs. Studies [1, 2] have shown that anthelmintic activity of PAs was mainly associated with their PD ratio but our current results suggest that galloylation can be a major factor to anthelmintic activity and SM as a potential nutraceutical anthelmintic feed for controlling parasitic nematodes.

Design and techno-economic evaluation of microbial oil production as a renewable resource for biodiesel and oleochemical production

Experimental results from the open literature have been employed for the design and techno-economic evaluation of four process flowsheets for the production of microbial oil or biodiesel. The fermentation of glucose-based media using the yeast strain Rhodosporidium toruloides has been considered. Biodiesel production was based on the exploitation of either direct transesterification (without extraction of lipids from microbial biomass) or indirect transesterifaction of extracted microbial oil. When glucose-based renewable resources are used as carbon source for an annual production capacity of 10,000 t microbial oil and zero cost of glucose (assuming development of integrated biorefineries in existing industries utilising waste or by-product streams) the estimated unitary cost of purified microbial oil is $3.4/kg. Biodiesel production via indirect transesterification of extracted microbial oil proved more cost-competitive process compared to the direct conversion of dried yeast cells. For a price of glucose of $400/t oil production cost and biodiesel production cost are estimated to be $5.5/kg oil and $5.9/kg biodiesel, correspondingly. Industrial implementation of microbial oil production from oleaginous yeast is strongly dependent on the feedstock used and on the fermentation stage where significantly higher productivities and final microbial oil concentrations should be achieved.

Reconstructing paleosalinity from δ18O: coupled model simulations of the Last Glacial Maximum, Last Interglacial and Late Holocene

Reconstructions of salinity are used to diagnose changes in the hydrological cycle and ocean circulation. A widely used method of determining past salinity uses oxygen isotope (δOw) residuals after the extraction of the global ice volume and temperature components. This method relies on a constant relationship between δOw and salinity throughout time. Here we use the isotope-enabled fully coupled General Circulation Model (GCM) HadCM3 to test the application of spatially and time-independent relationships in the reconstruction of past ocean salinity. Simulations of the Late Holocene (LH), Last Glacial Maximum (LGM), and Last Interglacial (LIG) climates are performed and benchmarked against existing compilations of stable oxygen isotopes in carbonates (δOc), which primarily reflect δOw and temperature. We find that HadCM3 produces an accurate representation of the surface ocean δOc distribution for the LH and LGM. Our simulations show considerable variability in spatial and temporal δOw-salinity relationships. Spatial gradients are generally shallower but within ∼50% of the actual simulated LH to LGM and LH to LIG temporal gradients and temporal gradients calculated from multi-decadal variability are generally shallower than both spatial and actual simulated gradients. The largest sources of uncertainty in salinity reconstructions are found to be caused by changes in regional freshwater budgets, ocean circulation, and sea ice regimes. These can cause errors in salinity estimates exceeding 4 psu. Our results suggest that paleosalinity reconstructions in the South Atlantic, Indian and Tropical Pacific Oceans should be most robust, since these regions exhibit relatively constant δOw-salinity relationships across spatial and temporal scales. Largest uncertainties will affect North Atlantic and high latitude paleosalinity reconstructions. Finally, the results show that it is difficult to generate reliable salinity estimates for regions of dynamic oceanography, such as the North Atlantic, without additional constraints.

Rapid selective separation of americium/curium from simulated nuclear forensic matrices using triazine ligands

In analysis of complex nuclear forensic samples containing lanthanides, actinides and matrix elements, rapid selective extraction of Am/Cm for quantification is challenging, in particular due the difficult separation of Am/Cm from lanthanides. Here we present a separation process for Am/Cm(III) which is achieved using a combination of AG1-X8 chromatography followed by Am/Cm extraction with a triazine ligand. The ligands tested in our process were CyMe4-BTPhen, CyMe4- BTBP, CA-BTP and CA-BTPhen. Our process allows for purification and quantification of Am and Cm (recoveries 80%–100%) and other major actinides in < 2d without the use of multiple columns or thiocyanate. The process is unaffected by high level Ca(II)/Fe(III)/Al(III) (10mg mL−1) and thus requires little pre-treatment of samples.

Edible oil from Tiger nut (Cyperus esculentus L.): mechanical pressing and aqueous enzymatic extraction methods

The tiger nut tuber of the Cyperus esculentus L. plant is an unusual storage system with similar amounts of starch and lipid. The extraction of its oil employing both mechanical pressing and aqueous enzymatic extraction (AEE) methods was investigated and an examination of the resulting products was carried out. The effects of particle size and moisture content of the tuber on the yield of tiger nut oil with pressing were initially studied. Smaller particles were found to enhance oil yields while a range of moisture content was observed to favour higher oil yields. When samples were first subjected to high pressures up to 700 MPa before pressing at 38 MPa there was no increase in the oil yields. Ground samples incubated with a mixture of α- Amylase, Alcalase, and Viscozyme (a mixture of cell wall degrading enzyme) as a pre-treatment, increased oil yield by pressing and 90% of oil was recovered as a result. When aqueous enzymatic extraction was carried out on ground samples, the use of α- Amylase, Alcalase, and Celluclast independently improved extraction oil yields compared to oil extraction without enzymes by 34.5, 23.4 and 14.7% respectively. A mixture of the three enzymes further augmented the oil yield and different operational factors were individually studied for their effects on the process. These include time, total mixed enzyme concentration, linear agitation speed, and solid-liquid ratio. The largest oil yields were obtained with a solid-liquid ratio of 1:6, mixed enzyme concentration of 1% (w/w) and 6 h incubation time although the longer time allowed for the formation of an emulsion. Using stationary samples during incubation surprisingly gave the highest oil yields, and this was observed to be as a result of gravity separation occurring during agitation. Furthermore, the use of high pressure processing up to 300 MPa as a pre-treatment enhanced oil yields but additional pressure increments had a detrimental effect. The quality of oils recovered from both mechanical and aqueous enzymatic extraction based on the percentage free fatty acid (% FFA) and peroxide values (PV) all reflected the good stabilities of the oils with the highest % FFA of 1.8 and PV of 1.7. The fatty acid profiles of all oils also remained unchanged. The level of tocopherols in oils were enhanced with both enzyme aided pressing (EAP) and high pressure processing before AEE. Analysis on the residual meals revealed DP 3 and DP 4 oligosaccharides present in EAP samples but these would require further assessment on their identity and quality.