93 resultados para Connected Technologies
Resumo:
In this paper, the global market potential of solar thermal, photovoltaic (PV) and combined photovoltaic/thermal (PV/T) technologies in current time and near future was discussed. The concept of the PV/T and the theory behind the PV/T operation were briefly introduced, and standards for evaluating technical, economic and environmental performance of the PV/T systems were addressed. A comprehensive literature review into R&D works and practical application of the PV/T technology was illustrated and the review results were critically analysed in terms of PV/T type and research methodology used. The major features, current status, research focuses and existing difficulties/barriers related to the various types of PV/T were identified. The research methods, including theoretical analyses and computer simulation, experimental and combined experimental/theoretical investigation, demonstration and feasibility study, as well as economic and environmental analyses, applied into the PV/T technology were individually discussed, and the achievement and problems remaining in each research method category were described. Finally, opportunities for further work to carry on PV/T study were identified. The review research indicated that air/water-based PV/T systems are the commonly used technologies but their thermal removal effectiveness is lower. Refrigerant/heat-pipe-based PV/Ts, although still in research/laboratory stage, could achieve much higher solar conversion efficiencies over the air/water-based systems. However, these systems were found a few technical challenges in practice which require further resolutions. The review research suggested that further works could be undertaken to (1) develop new feasible, economic and energy efficient PV/T systems; (2) optimise the structural/geometrical configurations of the existing PV/T systems; (3) study long term dynamic performance of the PV/T systems; (4) demonstrate the PV/T systems in real buildings and conduct the feasibility study; and (5) carry on advanced economic and environmental analyses. This review research helps finding the questions remaining in PV/T technology, identify new research topics/directions to further improve the performance of the PV/T, remove the barriers in PV/T practical application, establish the standards/regulations related to PV/T design and installation, and promote its market penetration throughout the world.
Resumo:
A better understanding of the systemic processes by which innovation occurs is useful, both conceptually and to inform policymaking in support of innovation in more sustainable technologies. This paper analyses current innovation systems in the UK for a range of new and renewable energy technologies, and generates policy recommendations for improving the effectiveness of these innovation systems. Although incentives are in place in the UK to encourage innovation in these technologies, system failures—or ‘gaps’—are identified in moving technologies along the innovation chain, preventing their successful commercialisation. Sustained investment will be needed for these technologies to achieve their potential. It is argued that a stable and consistent policy framework is required to help create the conditions for this. In particular, such a framework should be aimed at improving risk/reward ratios for demonstration and pre-commercial stage technologies. This would enhance positive expectations, stimulate learning effects leading to cost reductions, and increase the likelihood of successful commercialisation.
Resumo:
The proceedings of the conference
Resumo:
Sri Lanka's participation rates in higher education are low and have risen only slightly in the last few decades; the number of places for higher education in the state university system only caters for around 3% of the university entrant age cohort. The literature reveals that the highly competitive global knowledge economy increasingly favours workers with high levels of education who are also lifelong learners. This lack of access to higher education for a sizable proportion of the labour force is identified as a severe impediment to Sri Lanka‟s competitiveness in the global knowledge economy. The literature also suggests that Information and Communication Technologies are increasingly relied upon in many contexts in order to deliver flexible learning, to cater especially for the needs of lifelong learners in today‟s higher educational landscape. The government of Sri Lanka invested heavily in ICTs for distance education during the period 2003-2009 in a bid to increase access to higher education; but there has been little research into the impact of this. To address this lack, this study investigated the impact of ICTs on distance education in Sri Lanka with respect to increasing access to higher education. In order to achieve this aim, the research focused on Sri Lanka‟s effort from three perspectives: policy perspective, implementation perspective and user perspective. A multiple case study research using an ethnographic approach was conducted to observe Orange Valley University‟s and Yellow Fields University‟s (pseudonymous) implementation of distance education programmes using questionnaires, qualitative interviewing and document analysis. In total, data for the analysis was collected from 129 questionnaires, 33 individual interviews and 2 group interviews. The research revealed that ICTs have indeed increased opportunities for higher education; but mainly for people of affluent families from the Western Province. Issues identified were categorized under the themes: quality assurance, location, language, digital literacies and access to resources. Recommendations were offered to tackle the identified issues in accordance with the study findings. The study also revealed the strong presence of a multifaceted digital divide in the country. In conclusion, this research has shown that iii although ICT-enabled distance education has the potential to increase access to higher education the present implementation of the system in Sri Lanka has been less than successful.
Resumo:
Details are given of a boundary-fitted mesh generation method for use in modelling free surface flow and water quality. A numerical method has been developed for generating conformal meshes for curvilinear polygonal and multiply-connected regions. The method is based on the Cauchy-Riemann conditions for the analytic function and is able to map a curvilinear polygonal region directly onto a regular polygonal region, with horizontal and vertical sides. A set of equations have been derived for determining the lengths of these sides and the least-squares method has been used in solving the equations. Several numerical examples are presented to illustrate the method.
Resumo:
A representation of the conformal mapping g of the interior or exterior of the unit circle onto a simply-connected domain Ω as a boundary integral in terms ofƒ|∂Ω is obtained, whereƒ :=g -l. A product integration scheme for the approximation of the boundary integral is described and analysed. An ill-conditioning problem related to the domain geometry is discussed. Numerical examples confirm the conclusions of this discussion and support the analysis of the quadrature scheme.
Resumo:
The Code for Sustainable Homes (the Code) will require new homes in the United Kingdom to be ‘zero carbon’ from 2016. Drawing upon an evolutionary innovation perspective, this paper contributes to a gap in the literature by investigating which low and zero carbon technologies are actually being used by house builders, rather than the prevailing emphasis on the potentiality of these technologies. Using the results from a questionnaire three empirical contributions are made. First, house builders are selecting a narrow range of technologies. Second, these choices are made to minimise the disruption to their standard design and production templates (SDPTs). Finally, the coalescence around a small group of technologies is expected to intensify with solar-based technologies predicted to become more important. This paper challenges the dominant technical rationality in the literature that technical efficiency and cost benefits are the primary drivers for technology selection. These drivers play an important role but one which is mediated by the logic of maintaining the SDPTs of the house builders. This emphasises the need for construction diffusion of innovation theory to be problematized and developed within the context of business and market regimes constrained and reproduced by resilient technological trajectories.
Resumo:
Cities, which are now inhabited by a majority of the world's population, are not only an important source of global environmental and resource depletion problems, but can also act as important centres of technological innovation and social learning in the continuing quest for a low carbon future. Planning and managing large-scale transitions in cities to deal with these pressures require an understanding of urban retrofitting at city scale. In this context performative techniques (such as backcasting and roadmapping) can provide valuable tools for helping cities develop a strategic view of the future. However, it is also important to identify ‘disruptive’ and ‘sustaining’ technologies which may contribute to city-based sustainability transitions. This paper presents research findings from the EPSRC Retrofit 2050 project, and explores the relationship between technology roadmaps and transition theory literature, highlighting the research gaps at urban/city level. The paper develops a research methodology to describe the development of three guiding visions for city-regional retrofit futures, and identifies key sustaining and disruptive technologies at city scale within these visions using foresight (horizon scanning) techniques. The implications of the research for city-based transition studies and related methodologies are discussed.
Resumo:
This chapter explores the distinctive qualities of the Matt Smith era Doctor Who, focusing on how dramatic emphases are connected with emphases on visual style, and how this depends on the programme's production methods and technologies. Doctor Who was first made in the 1960s era of live, studio-based, multi-camera television with monochrome pictures. However, as technical innovations like colour filming, stereo sound, CGI and post-production effects technology have been routinely introduced into the programme, and now High Definition (HD) cameras, they have given Doctor Who’s creators new ways of making visually distinctive narratives. Indeed, it has been argued that since the 1980s television drama has become increasingly like cinema in its production methods and aesthetic aims. Viewers’ ability to view the programme on high-specification TV sets, and to record and repeat episodes using digital media, also encourage attention to visual style in television as much as in cinema. The chapter evaluates how these new circumstances affect what Doctor Who has become and engages with arguments that visual style has been allowed to override characterisation and story in the current Doctor Who. The chapter refers to specific episodes, and frames the analysis with reference to earlier years in Doctor Who’s long history. For example, visual spectacle using green-screen and CGI can function as a set-piece (at the opening or ending of an episode) but can also work ‘invisibly’ to render a setting realistically. Shooting on location using HD cameras provides a rich and detailed image texture, but also highlights mistakes and especially problems of lighting. The reduction of Doctor Who’s budget has led to Steven Moffat’s episodes relying less on visual extravagance, connecting back both to Russell T. Davies’s concern to show off the BBC’s investment in the series but also to reference British traditions of gritty and intimate social drama. Pressures to capitalise on Doctor Who as a branded product are the final aspect of the chapter’s analysis, where the role of Moffat as ‘showrunner’ links him to an American (not British) style of television production where the preservation of format and brand values give him unusual power over the look of the series.
Resumo:
Using a transactions costs framework, we examine the impact of information and communication technologies (mobile phones and radios) use on market participation in developing country agricultural markets using a novel transaction-level data set of Ghanaian farmers. Our analysis of the choice of markets by farmers suggests that market information from a broader range of markets may not always induce farmers to sell in more distant markets; instead farmers may use broader market information to enhance their bargaining power in closer markets. Finally, we find weak evidence on the impact of using mobile phones in attracting farm gate buyers.
Resumo:
The Distribution Network Operators (DNOs) role is becoming more difficult as electric vehicles and electric heating penetrate the network, increasing the demand. As a result it becomes harder for the distribution networks infrastructure to remain within its operating constraints. Energy storage is a potential alternative to conventional network reinforcement such as upgrading cables and transformers. The research presented here in this paper shows that due to the volatile nature of the LV network, the control approach used for energy storage has a significant impact on performance. This paper presents and compares control methodologies for energy storage where the objective is to get the greatest possible peak demand reduction across the day from a pre-specified storage device. The results presented show the benefits and detriments of specific types of control on a storage device connected to a single phase of an LV network, using aggregated demand profiles based on real smart meter data from individual homes. The research demonstrates an important relationship between how predictable an aggregation is and the best control methodology required to achieve the objective.
Resumo:
The proceedings of the conference
Resumo:
Outsourced workers in information technologies (IT) generally have high skills and a high value on the job market. Their IT outsourcing organizations are likely to provide them with training, in the first place for skill development, but perhaps also as a way to bind the workers to them. This can be understood along the role of the psychological contract. Outsourced IT workers may see training as a fulfillment of their psychological contract. Accordingly, we hypothesize that psychological contract fulfillment mediates the relationship between training and affective commitment to the IT outsourcer. This was tested in a sample of 158 Portuguese outsourced IT workers. The results showed that employees who considered that they were receiving good training opportunities felt a greater affective commitment to their IT outsourcers. This relationship was mediated by the fulfillment of the relational psychological contract.