Floodplain environmental change during the Younger Dryas and Holocene in Northwest Europe: Insights from the lower Kennet Valley, south central England

Many lowland rivers across northwest Europe exhibit broadly similar behavioural responses to glacial-interglacial transitions and landscape development. Difficulties exist in assessing these, largely because the evidence from many rivers remains limited and fragmentary. Here we address this issue in the context of the river Kennet, a tributary of the Thames, since c. 13,000 cal BP. Some similarities with other rivers are present, suggesting that regional climatic shifts are important controls. The Kennet differs from the regional pattern in a number of ways. The rate of response to sudden climatic change, particularly at the start of the Holocene and also mid-Holocene forest clearance, appears very high. This may reflect abrupt shifts between two catchment scale hydrological states arising from contemporary climates, land use change and geology. Stadial hydrology is dominated by nival regimes, with limited winter infiltration and high spring and summer runoff. Under an interglacial climate, infiltration is more significant. The probable absence of permafrost in the catchment means that a lag between the two states due to its gradual decay is unlikely. Palaeoecology, supported by radiocarbon dates, suggests that, at the very start of the Holocene, a dramatic episode of fine sediment deposition across most of the valley floor occurred, lasting 500-1000 years. A phase of peat accumulation followed as mineral sediment supply declined. A further shift led to tufa deposition, initially in small pools, then across the whole floodplain area, with the river flowing through channels cut in tufa and experiencing repeated avulsion. Major floods, leaving large gravel bars that still form positive relief features on the floodplain, followed mid-Holocene floodplain stability. Prehistoric deforestation is likely to be the cause of this flooding, inducing a major environmental shift with significantly increased surface runoff. Since the Bronze Age, predominantly fine sediments were deposited along the valley with apparently stable channels and vertical floodplain accretion associated with soil erosion and less catastrophic flooding. The Kennet demonstrates that, while a general pattern of river behaviour over time, within a region, may be identifiable, individual rivers are likely to diverge from this. Consequently, it is essential to understand catchment controls, particularly the relative significance of surface and subsurface hydrology. (c) 2005 Elsevier B.V. All rights reserved.

Midden cultivation in prehistoric Britain: arable crops in gardens

This paper summarizes some of the geoarchaeological evidence for early arable agriculture in Britain and Europe, and introduces new evidence for small-scale but very intensive cultivation in the Neolithic, Bronze Age and Iron Age in Scotland. The Scottish examples demonstrate that, from the Neolithic to the Iron Age, midden heaps were sometimes ploughed in situ; this means that, rather than spreading midden material onto the fields, the early farmers simply ran an ard over their compost heaps and sowed the resulting plots. The practice appears to have been common in Scotland, and may also have occurred in England. Neolithic cultivation of a Mesolithic midden is suggested, based on thin-section analysis of the middens at Northton, Harris. The fertility of the Mesolithic middens may partly explain why Neolithic farmers re-settled Mesolithic sites in the Northern and Western Isles.

The use of FT-IR as a screening technique for organic residue analysis of archaeological samples

A range of archaeological samples have been examined using FT-IR spectroscopy. These include suspected coprolite samples from the Neolithic site of Catalhoyuk in Turkey, pottery samples from the Roman site of Silchester, UK and the Bronze Age site of Gatas, Spain and unidentified black residues on pottery sherds from the Roman sites of Springhead and Cambourne, UK. For coprolite samples the aim of FT-IR analysis is identification. Identification of coprolites in the field is based on their distinct orange colour; however, such visual identifications can often be misleading due to their similarity with deposits such as ochre and clay. For pottery the aim is to screen those samples that might contain high levels of organic residues which would be suitable for GC-MS analysis. The experiments have shown coprolites to have distinctive spectra, containing strong peaks from calcite, phosphate and quartz; the presence of phosphorus may be confirmed by SEM-EDX analysis. Pottery containing organic residues of plant and animal origin has also been shown to generally display strong phosphate peaks. FT-IR has distinguished between organic resin and non-organic compositions for the black residues, with differences also being seen between organic samples that have the same physical appearance. Further analysis by CC-MS has confirmed the identification of the coprolites through the presence of coprostanol and bile acids, and shows that the majority of organic pottery residues are either fatty acids or mono- or di-acylglycerols from foodstuffs, or triterpenoid resin compounds exposed to high temperatures. One suspected resin sample was shown to contain no organic residues. and it is seen that resin samples with similar physical appearances have different chemical compositions. FT-IR is proposed as a quick and cheap method of screening archaeological samples before subjecting them to the more expensive and time-consuming method of GC-MS. This will eliminate inorganic samples such as clays and ochre from CC-MS analysis, and will screen those samples which are most likely to have a high concentration of preserved organic residues. (C) 2008 Elsevier B.V. All rights reserved.

Why we need new spectacles: Mapping the experiential dimension in prehistoric Cretan landscapes

The Bronze to Iron Age transition in Crete, a period of state collapse and insecurity, saw the island's rugged, high-contrast topography used in striking new ways. The visual drama of many of the new site locations has stimulated significant research over the last hundred years, with explanation of the change as the main focus. The new sites are not monumental in character: the vast majority are settlements, and much of the information about them comes from survey. Perhaps as a result, the new site map has not been much studied from phenomenological perspectives. A focus on the visual and experiential aspects of the new landscape can offer valuable insights into social structures at this period, and illuminate social developments prefiguring the emergence of polis states in Crete by c. 700 BC. To develop, share and evaluate this type of integrated study, digital reconstructive techniques are still under-used in this region. I highlight their potential value in addressing a regularly-identified shortcoming of phenomenological approaches-their necessarily subjective emphasis.

Taxonomical musings

In the ‘Object as Subject’ exhibition held at the Stephen Lawrence Gallery, Greenwich University, myself and two other artists showed work which explores the use of the ‘found object’ in their respective practices. My work was selected by the gallery curator David Waterworth. The work exhibited by me, two multi-media pieces and two films, continues my (practice as research) investigation into using everyday objects as starting points for creating work in a variety of mediums including: sculpture, films, installations and multiples. In this work I address a range of subject matters – philosophical, social and cultural. The history of the use of found object in art began in early 20th century European art when Marcel Duchamp and Pablo Picasso independently introduced everyday objects into their practice. My work continues this research.

Mode I fracture of sheet metal

The perceived wisdom about thin sheet fracture is that (i) the crack propagates under mixed mode I & III giving rise to a slant through-thickness fracture profile and (ii) the fracture toughness remains constant at low thickness and eventually decreases with increasing thickness. In the present study, fracture tests performed on thin DENT plates of various thicknesses made of stainless steel, mild steel, 6082-O and NS4 aluminium alloys, brass, bronze, lead, and zinc systematically exhibit (i) mode I “bath-tub”, i.e. “cup & cup”, fracture profiles with limited shear lips and significant localized necking (more than 50% thickness reduction), (ii) a fracture toughness that linearly increases with increasing thickness (in the range of 0.5–5 mm). The different contributions to the work expended during fracture of these materials are separated based on dimensional considerations. The paper emphasises the two parts of the work spent in the fracture process zone: the necking work and the “fracture” work. Experiments show that, as expected, the work of necking per unit area linearly increases with thickness. For a typical thickness of 1 mm, both fracture and necking contributions have the same order of magnitude in most of the metals investigated. A model is developed in order to independently evaluate the work of necking, which successfully predicts the experimental values. Furthermore, it enables the fracture energy to be derived from tests performed with only one specimen thickness. In a second modelling step, the work of fracture is computed using an enhanced void growth model valid in the quasi plane stress regime. The fracture energy varies linearly with the yield stress and void spacing and is a strong function of the hardening exponent and initial void volume fraction. The coupling of the two models allows the relative contributions of necking versus fracture to be quantified with respect to (i) the two length scales involved in this problem, i.e. the void spacing and the plate thickness, and (ii) the flow properties of the material. Each term can dominate depending on the properties of the material which explains the different behaviours reported in the literature about thin plate fracture toughness and its dependence with thickness.

Holocene palaeoenvironmental history and the impact of prehistoric salt production in the Seille Valley, Eastern France

The Seille Valley in eastern France was home to one of Europe’s largest Iron Age salt industries. Sedimentology, palynology and geochronology have been integrated within ongoing archaeological investigations to reconstruct the Holocene palaeoenvironmental history of the Seille Valley and to elucidate the human–environment relationship of salt production. A sedimentary model of the valley has been constructed from a borehole survey of the floodplain and pollen analyses have been undertaken to reconstruct the vegetation history. Alluvial records have been successfully dated using optically stimulated luminescence and radiocarbon techniques, thereby providing a robust chronological framework. The results have provided an insight into the development of favourable conditions for salt production and there is evidence in the sedimentary record to suggest that salt production may have taken place during the mid-to-late Bronze Age. The latter has yet to be identified in the archaeological record and targeted excavation is therefore underway to test this finding. The development of the Iron Age industry had a major impact on the hydrological regime of the valley and its sedimentological history, with evidence for accelerated alluviation arising from floodplain erosion at salt production sites and modification of the local fluvial regime due to briquetage accumulation on the floodplain. This research provides an important insight into the environmental implications of early industrial activities, in addition to advancing knowledge about the Holocene palaeoenvironmental and social history of this previously poorly studied region of France.