Subtype-selective GABAergic drugs facilitate extinction of mouse operant behaviour

Several recent studies have shown that reducing gamma-aminobutyric acid (GABA)-mediated neurotransmission retards extinction of aversive conditioning. However, relatively little is known about the effect of GABA on extinction of appetitively motivated tasks. We examined the effect of chlordiazepoxide (CDP), a classical benzodiazepine (BZ) and two novel subtype-selective BZs when administered to male C57Bl/6 mice during extinction following training on a discrete-trial fixed-ratio 5 (FR5) food reinforced lever-press procedure. Initially CDP had no effect, but after several extinction sessions CDP significantly facilitated extinction, i.e. slowed responding, compared with vehicle-treated mice. This effect was not due to drug accumulation because mice switched from vehicle treatment to CDP late in extinction showed facilitation immediately. Likewise, this effect could not be attributed to sedation because the dose of CDP used (15 mg/kg i.p.) did not suppress locomotor activity. The two novel subtype-selective BZ partial agonists, L-838417 and TP13, selectively facilitated extinction in similar fashion to CDP. The non-GABAergic anxiolytic buspirone was also tested and found to have similar effects when administered at a non-sedating dose. These studies demonstrate that GABA-mediated processes are important during extinction of an appetitively motivated task, but only after the animals have experienced several extinction sessions.

Simple prompts reduce inadvertent energy consumption from lighting in office buildings

Building designs regularly fail to achieve the anticipated levels of in-use energy consumption. The interaction of occupants with building controls is often cited as a key factor behind this discrepancy. This paper examines whether one factor in inadvertent energy consumption might be the appearance of post-completion errors (when an intended action is not taken because a primary goal has already been accomplished) in occupants’ interactions with building controls. Post-completion errors have been widely studied in human-computer interaction but the concept has not previously been applied to the interaction of occupants with building controls. Two experiments were carried out to examine the effect of incorporating two different types of simple prompt to reduce post-completion error in the use of light switches in office meeting rooms. Results showed that the prompts were effective and that occupants switched off lights when leaving the room more often when presented with a normative prompt than with a standard injunction. Additionally, an over reliance on PIR sensors to turn off lights after meetings was observed, which reduced their intended energy savings. We conclude that achieving low carbon buildings in practice is not solely a technological issue and that application of user-models from human-computer interaction will encourage appropriate occupant interaction with building controls and help reduce inadvertent energy consumption.

Simulation of a diffusion driven mobile robot

In this paper, we investigate the possibility to control a mobile robot via a sensory-motory coupling utilizing diffusion system. For this purpose, we implemented a simulation of the diffusion process of chemicals and the kinematics of the mobile robot. In comparison to the original Braitenberg vehicle in which sensorymotor coupling is tightly realised by hardwiring, our system employs the soft coupling. The mobile robot has two sets of independent sensory-motor unit, two sensors are implemented in front and two motors on each side of the robot. The framework used for the sensory-motor coupling was such that 1) Place two electrodes in the medium 2) Drop a certain amount of Chemical U and V related to the distance to the walls and the intensity of the light 3) Place other two electrodes in the medium 4) Measure the concentration of Chemical U and V to actuate the motors on both sides of the robot. The environment was constructed with four surrounding walls and a light source located at the center. Depending on the design parameters and initial conditions, the robot was able to successfully avoid the wall and light. More interestingly, the diffusion process in the sensory-motor coupling provided the robot with a simple form of memory which would not have been possible with a control framework based on a hard-wired electric circuit.

Poor survival on an artificial diet of two genotypes of the aphid Myzus persicae: a fitness cost of insecticide resistance?

A fully susceptible genotype (4106A) of Myzus persicae survived the longest on an artificial diet and, in several of the eight replicates, monitoring was terminated when the culture was still thriving. A genotype with elevated carboxylesterase FE4 at the R3 level (800F) had a mean survival of only 98.13 days, whereas 794J, which combines R3 E4 carboxylesterase with target-site resistance (knockdown resistance), survived for the even shorter mean time of 84.38 days. The poorer survival of the two genotypes with extremely elevated carboxylesterase-resistance was not the result of a reluctance to transfer to new diet at each diet change. Although available for only two replicates, a revertant clone of 794J (794Jrev), which has the same genotype as 794J but the amplified E4 genes are not expressed leading to a fully susceptible phenotype, did not appear to survive any better than this clone. This suggests that the poor survival on an artificial diet of the extreme-carboxylesterase genotypes is not the result of the cost of over-producing the enzyme. The frequency of insecticide-resistant genotypes is low in the population until insecticide is applied, indicating that they have reduced fitness, although this does not necessarily reflect a direct cost of expressing the resistance mechanism.

iPad use in fieldwork: formal and informal use to enhance pedagogical practice in a bring your own technology world

We report on use of iPads (and other IOS devices) for student fieldwork use and as electronic field notebooks and to promote active. We have used questionnaires and interviews of tutors and students to elicit their views and technology and iPad use for fieldwork. There is some reluctance for academic staff to relinquish paper notebooks for iPad use, whether in the classroom or on fieldwork, as well as use them for observational and measurement purposes. Students too are largely unaware of the potential of iPads for enhancing fieldwork. Apps can be configured for a wide variety of specific uses that make iPads useful for educational as well as social uses. Such abilities should be used to enhance existing practice as well as make new functionality. For example, for disabled students who find it difficult to use conventional note taking. iPads can be used to develop student self-directed learning and for group contributions. The technology becomes part of the students’ personal learning environments as well as at the heart of their knowledge spaces – academic and social. This blurring of boundaries is due to iPads’ usability to cultivate field use, instruction, assessment and feedback processes. iPads can become field microscopes and entries to citizen science and we see the iPad as the main ‘computing’ device for students in the near future. As part of the Bring Your Own Technology/Device (BYOD) the iPad has much to offer although, both staff and students need to be guided in the most effective use for self-directed education via development of Personal Learning Environments. A more student-oriented pedagogy is suggested to correspond to the increasing use of tablet technologies by students

Evolving corporate social responsibility in China

With a unique cultural background and fast economic development, China’s adoption of corporate social responsibility (CSR) has become the center of discussion worldwide, and its successful implementation will have great significance for global sustainability. This paper aims to explore how CSR has given way to economic growth in China since the start of economic transition and its cultural, historical and political background, and how this has affected or been affected by the economic performance of firms. Thus, the recent calls for China to adopt CSR in its industries follow a period where the country arguably had one of the strongest implementations of CSR approaches in the world. This transition is considered in the context of a case study of a Chinese state-owned enterprise (SOE) and a group of small private firms in the same industrial sector in Zhengzhou City, Henan Province over a time span of eight years. While the CSR of the SOE has been steadily decreasing along with the change of ownership structure, its economic performance did not improve as expected. On the other hand, with a steady improvement in economic performance, the small private firms are showing a great reluctance to engage in CSR. The results indicate that implementation of CSR in China needs both the manager’s ethical awareness and the change of institutional framework. The results also raise the question as to whether CSR is a universal concept with a desired means of implementation across the developed and developing world.

Switchable amplification of vibrational circular dichroism as a probe of local chiral structure

A new method to detect the vibrational circular dichroism (VCD) of a localized part of a chiral molecular system is reported. A local VCD amplifier was implemented, and the distance dependence of the amplification was investigated in a series of peptides. The results indicate a characteristic distance of 2.0±0.3 bonds, which suggests that the amplification is a localized phenomenon. The amplifier can be covalently coupled to a specific part of a molecule, and can be switched ON and OFF electrochemically. By subtracting the VCD spectra obtained when the amplifier is in the ON and OFF states, the VCD of the local environment of the amplifier can be separated from the total VCD spectrum. Switchable local VCD amplification thus makes it possible to “zoom in” on a specific part of a chiral molecule.

Bond graph models of DC-DC converters operating in both CCM and DCM

In this paper, Bond Graphs are employed to develop a novel mathematical model of conventional switched-mode DC-DC converters valid for both continuous and discontinuous conduction modes. A unique causality bond graph model of hybrid models is suggested with the operation of the switch and the diode to be represented by a Modulated Transformer with a binary input and a resistor with fixed conductance causality. The operation of the diode is controlled using an if-then function within the model. The extracted hybrid model is implemented on a Boost and Buck converter with their operations to change from CCM to DCM and to return to CCM. The vector fields of the models show validity in a wide operation area and comparison with the simulation of the converters using PSPICE reveals high accuracy of the proposed model, with the Normalised Root Means Square Error and the Maximum Absolute Error remaining adequately low. The model is also experimentally tested on a Buck topology.

Understanding consumer evaluations of personalised nutrition services in terms of the privacy calculus: a qualitative study

Background: Personalised nutrition (PN) may provide major health benefits to consumers. A potential barrier to the uptake of PN is consumers’ reluctance to disclose sensitive information upon which PN is based. This study adopts the privacy calculus to explore how PN service attributes contribute to consumers’ privacy risk and personalisation benefit perceptions. Methods: Sixteen focus groups (n = 124) were held in 8 EU countries and discussed 9 PN services that differed in terms of personal information, communication channel, service provider, advice justification, scope, frequency, and customer lock-in. Transcripts were content analysed. Results: The personal information that underpinned PN contributed to both privacy risk perception and personalisation benefit perception. Disclosing information face-to-face mitigated the perception of privacy risk and amplified the perception of personalisation benefit. PN provided by a qualified expert and justified by scientific evidence increased participants’ value perception. Enhancing convenience, offering regular face-to face support, and employing customer lock-in strategies were perceived as beneficial. Conclusion: This study suggests that to encourage consumer adoption, PN has to account for face-to-face communication, expert advice providers, support, a lifestyle-change focus, and customised offers. The results provide an initial insight into service attributes that influence consumer adoption of PN.

The representation of the West-African Monsoon vertical cloud structure in the Met Office Unified Model: an evaluation with CloudSat

Weather and climate model simulations of the West African Monsoon (WAM) have generally poor representation of the rainfall distribution and monsoon circulation because key processes, such as clouds and convection, are poorly characterized. The vertical distribution of cloud and precipitation during the WAM are evaluated in Met Office Unified Model simulations against CloudSat observations. Simulations were run at 40-km and 12-km horizontal grid length using a convection parameterization scheme and at 12-km, 4-km, and 1.5-km grid length with the convection scheme effectively switched off, to study the impact of model resolution and convection parameterization scheme on the organisation of tropical convection. Radar reflectivity is forward-modelled from the model cloud fields using the CloudSat simulator to present a like-with-like comparison with the CloudSat radar observations. The representation of cloud and precipitation at 12-km horizontal grid length improves dramatically when the convection parameterization is switched off, primarily because of a reduction in daytime (moist) convection. Further improvement is obtained when reducing model grid length to 4 km or 1.5 km, especially in the representation of thin anvil and mid-level cloud, but three issues remain in all model configurations. Firstly, all simulations underestimate the fraction of anvils with cloud top height above 12 km, which can be attributed to too low ice water contents in the model compared to satellite retrievals. Secondly, the model consistently detrains mid-level cloud too close to the freezing level, compared to higher altitudes in CloudSat observations. Finally, there is too much low-level cloud cover in all simulations and this bias was not improved when adjusting the rainfall parameters in the microphysics scheme. To improve model simulations of the WAM, more detailed and in-situ observations of the dynamics and microphysics targeting these non-precipitating cloud types are required.