Attitudes of landscape professionals towards naturalistic versus formal urban landscapes in the UK

The last 30 years have seen a tide of interest sweeping across Europe in the development of nature in cities, and an increasing amount of landscape development in urban areas has involved the use of 'naturalistic' styles. This is an increasing attempt to find ways for urbanism and nature to co-exist. However, there have been considerable discussions among professionals regarding the advantages and disadvantages of 'naturalistic' styles in urban areas. This research examines professional attitudes to 'naturalistic' landscape styles in Britain, in contrast to more traditional, formal landscape styles, and aims to find out whether the interest in natural landscapes is really a fashion among landscape professionals. A self-administered postal survey was carried out using both quantitative and qualitative data collection techniques and analysis. The survey included 500 professionals from parks and recreation departments of local authorities, private landscape practices and conservation trusts, and resulted in a satisfactory response rate of 53 %. The results of this study suggested that professionals recognise most of the values attached to naturalistic landscapes in urban areas. However, possible benefits that natural areas may have for urban people are not attached to naturalistic landscapes alone. The study also revealed that the naturalistic style is highly popular among conservation trusts but is less so among professionals from local authorities and private landscape practices who seem to appreciate both styles and believe that these styles are not separable from each other and should co-exist in an urban environment. (C) 2006 Elsevier B.V. All rights reserved.

Mapping the landscape of the lymphocytic choriomeningitis virus stable signal peptide reveals novel functional domains

The stable signal peptide (SSP) of the lymphocytic choriomeningitis virus surface glycoprotein precursor has several unique characteristics. The SSP is unusually long, at 58 amino acids, and contains two hydrophobic domains, and its sequence is highly conserved among both Old and New World arenaviruses. To better understand the functions of the SSP, a panel of point and deletion mutants was created by in vitro mutagenesis to target the highly conserved elements within the SSP. We were also able to confirm critical residues required for separate SSP functions by trans-complementation. Using these approaches, it was possible to resolve functional domains of the SSP. In characterizing our SSP mutants, we discovered that the SSP is involved in several distinct functions within the viral life cycle, beyond translocation of the viral surface glycoprotein precursor into the endoplasmic reticulum lumen. The SSP is required for efficient glycoprotein expression, posttranslational maturation cleavage of GP1 and GP2 by SKI-1/S1P protease, glycoprotein transport to the cell surface plasma membrane, formation of infectious virus particles, and acid pH-dependent glycoprotein-mediated cell fusion.

Assembling spatially explicit landscape models of pollen and spore dispersal by wind for risk assessment

Models of windblown pollen or spore movement are required to predict gene flow from genetically modified (GM) crops and the spread of fungal diseases. We suggest a simple form for a function describing the distance moved by a pollen grain or fungal spore, for use in generic models of dispersal. The function has power-law behaviour over sub-continental distances. We show that air-borne dispersal of rapeseed pollen in two experiments was inconsistent with an exponential model, but was fitted by power-law models, implying a large contribution from distant fields to the catches observed. After allowance for this 'background' by applying Fourier transforms to deconvolve the mixture of distant and local sources, the data were best fit by power-laws with exponents between 1.5 and 2. We also demonstrate that for a simple model of area sources, the median dispersal distance is a function of field radius and that measurement from the source edge can be misleading. Using an inverse-square dispersal distribution deduced from the experimental data and the distribution of rapeseed fields deduced by remote sensing, we successfully predict observed rapeseed pollen density in the city centres of Derby and Leicester (UK).

Equivalent noise level generated by drilling onto the ossicular chain as measured by laser Doppler vibrometry: A temporal bone study

Background: Inadvertent drilling on the ossicular chain is one of the causes of sensorineural hearing loss (HL) that may follow tympanomastoid surgery. A high-frequency HL is most frequently observed. It is speculated that the HL is a result of vibration of the ossicular chain resembling acoustic noise trauma. It is generally considered that using a large cutting burr is more likely to cause damage than a small diamond burr. Aim: The aim was to investigate the equivalent noise level and its frequency characteristics generated by drilling onto the short process of the incus in fresh human temporal bones. Methods and Materials: Five fresh cadaveric temporal bones were used. Stapes displacement was measured using laser Doppler vibrometry during short drilling episodes. Diamond. and cutting burrs of different diameters were used. The effect of the drilling on stapes footplate displacement was compared with that generated by an acoustic signal. The equivalent noise level (dB sound pressure level equivalent [SPL eq]) was thus calculated. Results: The equivalent noise levels generated ranged from 93 to 125 dB SPL eq. For a 1-mm cutting burr, the highest equivalent noise level was 108 dB SPL eq, whereas a 2.3-mm cutting burr produced a maximal level of 125 dB SPL eq. Diamond burrs generated less noise than their cutting counterparts, with a 2.3-mm diamond burr producing a highest equivalent noise level of 102, dB SPL eq. The energy of the noise increased at the higher end of the frequency spectrum, with a 2.3-mm cutting burr producing a noise level of 105 dB SPL eq at 1 kHz and 125 dB SPL eq at 8 kHz. In contrast, the same sized diamond burr produced 96 dB SPL eq at 1 kHz and 99 dB at 8 kHz. Conclusion:This study suggests that drilling on the ossicular chain can produce vibratory force that is analogous with noise levels known to produce acoustic trauma. For the same type of burr, the larger the diameter, the greater the vibratory force, and for the same size of burr, the cutting burr creates more vibratory force than the diamond burr. The cutting burr produces greater high-frequency than lower-frequency vibratory energy.

Apolipoprotein B-48: comparison of fasting concentrations measured in normolipidaemic individuals using SDS-PAGE, immunoblotting and ELISA

Raised levels of chylomicrons and chylomicron remnants, which circulate following a meal, have been implicated in the development of atherosclerosis. Apolipoprotein (apo) B-48 is exclusively associated with chylomicron particles and provides a specific direct measurement of the number of intestinally derived lipoproteins in the circulation. The quantification of apo B-48 in biological samples is difficult due to the very low concentration in plasma, structural similarity to the N-terminal 48% of apo B-100 and lack of an appropriate standard for apo B-48. Sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE), followed by coomassie blue staining, has been used for many years to measure apo B-48 levels in triacylglycerol (TAG)-rich lipoprotein samples. The raising of antiserum to apo B-48 has led to development of more sensitive and specific methods including immunoblotting and enzyme-linked immunosorbant assays (ELISAs). This has enabled direct measurement of apo B-48 in plasma without the need for separation into TAG-rich lipoproteins. A high degree of variability was observed in the apo B-48 concentrations reported in the literature both within and between the SDS-PAGE, immunoblotting and ELISA methods. (C) 2004 Elsevier Ireland Ltd. All rights reserved.

Time course of oculomotor inhibition revealed by saccade trajectory modulation

Selecting a stimulus as the target for a goal-directed movement involves inhibiting other competing possible responses. Both target and distractor stimuli activate populations of neurons in topographic oculomotor maps such as the superior colliculus. Local inhibitory interconnections between these populations ensure only one saccade target is selected. Suppressing saccades to distractors may additionally involve inhibiting corresponding map regions to bias the local competition. Behavioral evidence of these inhibitory processes comes from the effects of distractors on oculomotor and manual trajectories. Individual saccades may initially deviate either toward or away from a distractor, but the source of this variability has not been investigated. Here we investigate the relation between distractor-related deviation of trajectory and saccade latency. Targets were presented with, or without, distractors, and the deviation of saccade trajectories arising from the presence of distractors was measured. A fixation gap paradigm was used to manipulate latency independently of the influence of competing distractors. Shorter- latency saccades deviated toward distractors and longer-latency saccades deviated away from distractors. The transition between deviation toward or away from distractors occurred at a saccade latency of around 200 ms. This shows that the time course of the inhibitory process involved in distractor related suppression is relatively slow.

Landscape of intelligent cores: An autonomic multi-agent approach for space application

Space applications are challenged by the reliability of parallel computing systems (FPGAs) employed in space crafts due to Single-Event Upsets. The work reported in this paper aims to achieve self-managing systems which are reliable for space applications by applying autonomic computing constructs to parallel computing systems. A novel technique, 'Swarm-Array Computing' inspired by swarm robotics, and built on the foundations of autonomic and parallel computing is proposed as a path to achieve autonomy. The constitution of swarm-array computing comprising for constituents, namely the computing system, the problem / task, the swarm and the landscape is considered. Three approaches that bind these constituents together are proposed. The feasibility of one among the three proposed approaches is validated on the SeSAm multi-agent simulator and landscapes representing the computing space and problem are generated using the MATLAB.

Building communities via a learning landscape

The Learning Landscape project described here is known as RedGloo and has several objectives; among others it aims to help students to make friends, contacts and join communities based on interests and competencies. RedGloo provides a space where students can support each other with personal, academic and career development, sharing insights gained from extracurricular activities as well as their degree programmes. It has shown tendencies of becoming a learning community with several communities of practice.